Sunshine SS-C210-K Soldering Tip for T210 Handle
₨ 800
C210-K Knife Tip for T210 Stations
The Sunshine C210-K soldering tip gives your T210, T26 or S210 handle a knife-edge cartridge built for drag soldering, pad cleaning and resin removal on mobile phone boards. The cartridge combines heater and tip in one 80 mm unit with multilayer nano electroplating and a stainless steel housing, so it heats in about a second and tins in about two. You plug it into the handle without disassembly and swap a worn tip in under a minute. Pair it with your soldering station, hot air station and microscope for IC change, pad leveling and reballing prep on dead phone boards.
In stock
Sunshine C210-K Soldering Tip: Knife-Edge Cartridge for T210 Handles
The Sunshine C210-K soldering tip gives a T210-class station a knife-edge cartridge for the jobs that consume most of your bench time. You drag solder across fine-pitch pads, flatten leftover solder after an IC change, and clear flux resin from a dead phone board. The cartridge integrates the heating element and the tip into a single 80 mm unit, so heat reaches the work surface quickly and you replace the whole tip in seconds instead of rebuilding a handle.
Knife-Edge Geometry and Heat Behaviour
The C210-K carries the 45° oblique knife profile of the Sunshine SS-C210 series. The flat blade holds a wide band of solder and carries it along a row of pads in one pass, which gives connector footprints and BGA pad rows a far more even finish than a conical tip. The cartridge pairs a copper tip with multilayer nano electroplating and wraps both in a stainless steel housing. The plating resists oxidation and keeps the blade easy to tin, while the housing limits heat loss between the heater and the working edge. Supplier specifications quote roughly one second to heat up and two seconds to tin, so you wait less between joints and hold a steadier temperature through repeated passes across a board.
Handle Compatibility and Workflow Fit
The C210-K fits T210-style handpieces. Sunshine, JBC, Sugon and GVM T210 handles accept it, and it also suits T26 and S210 station handles. Confirm your handle type before you order, then plug the cartridge in without disassembling anything. Technicians who already run the pointed C210-I or elbow C210-IS tips from the same series can add the K blade without changing handles or stations.
Board-level work in a Pakistani repair shop follows a repeatable pattern. You lift the IC with a hot air station, clean the pads, tin them, then place the replacement chip or prepare the board for reballing. The C210-K covers the cleaning and tinning steps. You remove old solder from pads, level them before reballing, and clear resin around the footprint before you check continuity with a multimeter. The blade also handles desoldering flying leads on mobile phone motherboards and routine jumper lagana on lifted traces, although the fine C210-I tip suits the thinnest jumper wires better. Work under a microscope and hold the board in a PCB holder. The slim 3.5 mm body leaves a clear view of the pads while you work, and the same blade serves hardware fault repairs from charging issue boards to display problem boards.
Handling and Tip Life
Keep the blade tinned between passes and set the lowest temperature that flows your solder cleanly. Wipe on brass wool rather than a wet sponge so the tip avoids thermal shock. Never file the plated surface, because the nano plating protects the copper beneath it. Store spare cartridges in their retail plastic box to keep the edge undamaged. A tip that stops wetting needs replacement, not more heat. Stocking a few spare C210-K cartridges beside your soldering station keeps your bench running through busy repair days, and the low unit cost makes replacement cheaper than fighting a worn blade.
| Weight | 0.5 kg |
|---|
Key Features
- ✓Knife-edge blade with 45° oblique design
- ✓Integrated heater and tip in one cartridge
- ✓Heats in about 1 second and tins in about 2 seconds
- ✓Multilayer nano electroplating resists oxidation
- ✓Stainless steel housing reduces heat loss
- ✓Plug-and-play fitting with no handle disassembly
- ✓Fits T210, T26 and S210 station handles
- ✓Compact 80 mm body for microscope work
Specifications
| Brand | Sunshine |
|---|---|
| Model | SS-C210-K |
| Category | Soldering Iron Tips |
| Compatibility | T210, T26 and S210 soldering station handles |
| Technology | Integrated heater cartridge with multilayer nano electroplating |
| Material | Nano-electroplated copper tip with stainless steel housing |
| Dimensions | 80 x 3.5 x 3.5 mm |
Common Repair Uses
- ✓Board-level soldering, drag soldering and pad cleaning on mobile phone PCBs
- ✓Drag soldering on fine-pitch pads and connector footprints
- ✓Pad cleaning after IC removal
- ✓Resin and flux residue removal
- ✓Desoldering flying leads on mobile phone motherboards
- ✓Leveling solder on pads before reballing
- ✓Clearing solder bridges between adjacent pads
- ✓Tinning pads before IC or component placement
- ✓Reworking SMD components during hardware fault repair
Compatible Devices
- ✓Universal for mobile PCB work. Handle-compatible with T210, T26 and S210 stations; not phone-model specific
- ✓Sunshine T210 handpieces
- ✓JBC T210 handpieces
- ✓Sugon T210 handpieces
- ✓GVM T210 handpieces
- ✓T26 station handles
- ✓S210 station handles
- ✓Same-series C210-I and C210-IS tips share the same handles
- ✓Usable on any mobile phone motherboard, regardless of brand or chipset
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the C210-K tip fit JBC and GVM T210 handles?
Which repair jobs suit the C210-K knife tip on a dead phone board?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock



