TE-188 Universal PCB Holder Fixture

₨ 4,000

TE-188 Double Bearing PCB Holder

The TE-188 PCB holder for mobile repair clamps smartphone, tablet, and CPU boards on a double bearing platform that tilts to the angle you need. A high-strength alloy body carries an imported synthetic stone platform with high-temperature resistance and an imitation anti-static surface. Your hot air and soldering work stays on a stable base. A built-in tin planting platform supports reballing. The 193.5 × 21.5 × 93.5 mm footprint fits a standard repair bench. You use it for IC degumming, CPU removal, and motherboard IC clamping on jobs from dead phone cases to routine charging issue repairs.

In stock

13 People watching this product now!
Description

TE-188 PCB Holder for Mobile Repair: Double Bearing Board Fixture

Board movement ruins precision work. When a motherboard shifts under a hot air nozzle or a soldering iron tip, you lose pad alignment, risk neighboring components, and restart the job. The TE-188 PCB holder for mobile repair removes that variable. It grips the board on a double bearing platform, so you set the angle once and work without the board creeping.

Double Bearing Platform and Material Construction

The double bearing system gives you adjustable angle positioning. You rotate and tilt the board to reach the chip you want, then continue the repair without re-clamping. An anti-slip base keeps the fixture planted on your bench while you apply pressure with tweezers or a scraper. The body uses a wear-resistant, high-strength alloy, so repeated clamping does not loosen the structure over months of daily workshop use. The working platform uses imported synthetic stone with high-temperature resistance, which tolerates the heat from a hot air station. The surface carries an imitation anti-static design. Treat it as a heat-tolerant, low-slip work surface rather than a certified ESD rating. The fixture measures 193.5 × 21.5 × 93.5 mm.

Where the TE-188 Fits in Your Repair Workflow

You reach for this fixture at the board level, once the phone is open and the motherboard sits on your bench. It supports mobile motherboard maintenance, smartphone and tablet PCB repair, and CPU and hard disk fixing. For IC degumming, the stable platform lets you remove glue around a chip with a scraper without the board sliding. The integrated tin planting platform supports reballing, so you hold the chip steady while you apply solder paste and stencil work. Technicians who handle IC change karna jobs, charging issue boards, and dead phone diagnosis place the TE-188 beside a hot air station and a microscope. The same setup pairs with a reballing kit when you rebuild BGA pads and with a multimeter when you probe test points between steps.

Why Workshops Stock a Universal Holder

A universal fixture saves bench space and money. One holder handles different board sizes, so you avoid keeping a separate jig for each model that comes through your shop. Repair shops with several technicians get consistent clamping across every bench. Service centers and technical training institutes use the same fixture for demonstrations and laboratory practice, because the double bearing mechanism shows students how board angle changes visibility and tool access. When you compare options in the PCB holders category, the TE-188 stands out for its synthetic stone platform and built-in tin planting area, two features that cut the number of accessories on your bench. Add it to your setup next to your soldering stations and ISP pinout tools, and your board-level workflow gets steadier from first clamp to final test.

Additional information
Weight0.8 kg
Q & A
Please login to post questions

Key Features

  • Double bearing design for precise positioning
  • Adjustable angle positioning
  • Anti-slip base for stable operation
  • Wear-resistant, high-strength alloy body
  • Imported synthetic stone platform
  • High-temperature resistance for hot air work
  • Imitation anti-static surface
  • Integrated tin planting platform

Specifications

ModelTE-188
CategoryPCB Fixtures
CompatibilityUniversal mobile motherboard, smartphone, tablet, CPU, and hard disk board clamping
TechnologyDouble bearing system with adjustable angle positioning
MaterialHigh-strength alloy body, imported synthetic stone platform
Dimensions193.5 × 21.5 × 93.5 mm

Common Repair Uses

  • Board-level holding for heat, scraping, and soldering work.
  • Mobile motherboard maintenance
  • Smartphone and tablet PCB repair
  • CPU and hard disk fixing
  • Precision IC degumming
  • Tin planting and reballing platform operations
  • Motherboard IC clamping
  • Laboratory research and educational demonstrations
  • Professional repair workshop use

Compatible Devices

  • Universal — not device-specific. Holds boards by clamping, so it suits smartphone, tablet, CPU, and hard disk boards across brands.
  • Mobile phone motherboards
  • Smartphone PCBs
  • Tablet PCBs
  • CPU chips mounted on boards
  • Hard disk boards
  • Motherboards that need IC clamping
  • Boards prepared for tin planting and reballing
  • Precision component boards

FAQ

What is the product name?
The product name is TE-188 Universal PCB Holder Fixture.
What are the dimensions of the TE-188?
The TE-188 measures 193.5 × 21.5 × 93.5 mm.
What is the model of this product?
The model of this product is TE-188.
What is this product used for?
This product holds mobile motherboards, tablet PCBs, and CPU boards during IC degumming, tin planting, reballing, and soldering work.
Which devices are compatible with this product?
This product is universal. It clamps smartphone, tablet, CPU, and hard disk boards and does not target specific phone models.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can the TE-188 handle hot air rework without damaging the platform?
The platform uses imported synthetic stone with high-temperature resistance, which suits hot air station work and IC degumming. Keep your nozzle temperature within the limits of the chip and board you repair.
Does the TE-188 include a tin planting platform for reballing?
Yes. The fixture includes a dedicated tin planting platform for reballing work.