Mijing KC8 CPU Blade Set – Glue Removal Knife
₨ 3,300
Quick-Release CPU Blade Set
The Mijing KC8 CPU blade set pairs one quick-release handle with eight interchangeable blades for removing glue around CPU, NAND and IC chips on mobile phone motherboards. Press the rebound release, swap the blade in seconds, and keep your hands on the board. Each blade uses fine high-carbon elastic steel with a hand-polished, vacuum-plated finish that resists corrosion and wear. Laser-cut profiles keep the set uniform from blade to blade. You cut black glue, clear side glue and pry stubborn chips during dead phone and hardware fault repairs, then move straight to reballing or IC change karna with clean chip edges.
In stock
Mijing KC8 CPU Blade Set for Board-Level Glue Removal
The Mijing KC8 CPU blade set gives you a quick-release handle and eight interchangeable blades for cutting and lifting hardened glue around CPU, NAND and IC chips on mobile phone motherboards. You press the rebound release, swap the blade in seconds, and keep working without reaching for a second tool. Mechanicpk supplies the KC8 to technicians who deal with underfill and edge glue every day and need controlled, repeatable results on the board. If you cut glue around a CPU only now and then, one blade may seem enough. Once boards arrive daily, a full set lets you match each blade to the gap in front of you.
High-Carbon Elastic Steel Blades With a Plated Finish
Mijing makes each KC8 blade from fine high-carbon elastic steel. Hand polishing shapes the surface, and a vacuum plating process adds corrosion resistance, wear resistance and durability under the heat you generate during rework. The steel stays tough and springs back instead of taking a permanent bend, so a blade that flexes under pressure returns to its original profile. Laser cutting forms every blade, which keeps the shape uniform across the set. That uniformity matters when you open a dead phone with heavy black glue around the SoC: you pick the same profile, apply the same pressure and get the same result, instead of fighting a blade that behaves differently from the one before it. The design balances rigidity with flexibility, so you push through hardened adhesive with control.
Press-and-Rebound Handle for Fast Blade Changes
The KC8 handle uses a press-and-rebound structure. You press the release, pull the blade out, seat the next one and continue. No clamp screw means no tiny parts rolling off a crowded bench. The universal ergonomic grip sits comfortably in your hand through long sessions, which helps when a single board needs several passes across multiple chips. You move between blade profiles without leaving your microscope view, and you keep your rhythm on boards that carry glue on more than one side of the chip. The package includes 1 handle and 8 blades.
Where the KC8 Fits in Your Rework Process
The KC8 sits at the glue-removal stage of board-level repair, after you heat the chip and before you lift or reball it. Preheat the board with your hot air station or soldering station, soften the glue, then run the blade along the chip edge to cut and clear the black glue. Once the edge opens, you lift the chip, clean the pads and move to your reballing kit for IC change karna or CPU reball jobs. This CPU glue removal knife also covers side glue removal, motherboard glue removal and prying work, which accounts for most hardware fault cases that involve glued CPU and NAND flash packages.
Work with light, steady pressure and angle the blade along the chip edge instead of driving it straight down. Heat the board first so the glue softens, and stop to reheat when the blade meets resistance. Patience here protects the pads and traces underneath.
A PCB holder keeps the board steady while you cut, and a microscope lets you follow the blade edge along the chip boundary. Together these tools build a bench routine you can repeat on every board, from a charging issue that traces back to a lifted IC to a boot loop issue after a failed reflow. Because blade changes take seconds, you can assign specific blades to specific chip types and keep your process organized across a busy shift. Repair shops and service centers that process boards daily get a handle and blade set in the Mijing KC8 CPU blade set that supports that pace without slowing the bench.
| Weight | 0.9 kg |
|---|
Key Features
- ✓Press-and-rebound structure for quick blade release and replacement
- ✓1 handle and 8 interchangeable blades in the set
- ✓Fine high-carbon elastic steel blades that flex and return without deforming
- ✓Hand-polished blades with a vacuum plating finish
- ✓Corrosion resistance, wear resistance and high-temperature durability
- ✓Laser-cut blades for uniform shape across the set
- ✓Universal ergonomic handle for a comfortable grip
- ✓Multi-function use: black glue cutting, side glue removal, motherboard glue removal and prying
Specifications
| Brand | Mijing |
|---|---|
| Model | KC8 |
| Category | CPU Disassemble Knife / Glue Removal Blade Set |
| Compatibility | Universal - not device-specific |
| Technology | Press-and-rebound quick-release blade change, vacuum plating finish |
| Material | High-carbon elastic steel blades |
Common Repair Uses
- ✓Glue cutting, glue removal and chip prying during board-level mobile phone repair
- ✓Cutting black glue around CPU chips
- ✓Side glue removal on motherboard chips
- ✓Motherboard glue removal before IC change karna
- ✓Prying and lifting NAND and CPU packages after heating
- ✓IC removal and rework preparation
- ✓Clearing glue before reballing
- ✓Pad and board cleanup after chip removal
- ✓Prying hard disk components
Compatible Devices
- ✓Universal - not device-specific; used on mobile phone motherboards where glue surrounds chips
- ✓Mobile phone motherboards (universal, not brand-limited)
- ✓CPU / SoC packages secured with black glue
- ✓NAND flash chips with edge glue
- ✓General IC chips on phone PCBs
- ✓Chips with side glue
- ✓Underfilled chip edges
- ✓Hard disk prying tasks
- ✓Other electronic PCBs with glued components



