Sugon 2020D/212 Heat Gun Handle for Rework Station

₨ 4,500

Sugon 2020D Heat Gun Handle

The Sugon 2020D heat gun handle replaces a worn or damaged hot air gun on your Sugon 2020D rework station. Mechanicpk supplies this dedicated part so your station keeps its correct connector fit and airflow control instead of running a mismatched universal handle. You use it for IC removal, BGA and SMD rework, and board preheating on dead phones and hardware fault cases. Pair it with the straight and spiral nozzles of your 2020D and your hot air workflow continues unchanged. Order the handle for your repair bench in Pakistan and return your station to full service.

Out of stock

20 People watching this product now!
Description

Sugon 2020D Heat Gun Handle for Dedicated Hot Air Rework

The Sugon 2020D heat gun handle is a dedicated replacement part for the Sugon 2020D hot air rework station. A station performs only as well as its gun, and when the handle cracks, the cable frays, or the airflow cuts out, every IC change on your bench stops. This handle restores the gun end of your system with a part matched to the 2020D model, so you avoid forcing a generic handle onto a station it does not suit. Distributors list it as exclusively compatible with the 2020D, which keeps the connection secure and the station functioning as intended.

How the Handle Fits the 2020D System

The 2020D is a microcomputer-controlled hot air station with an LED digital display, a brushless fan, and a temperature range of 100–500°C (212–932°F). Airflow reaches 100 litres per minute, and the station cools its heating element automatically to protect the gun. The handle sits at the end of that chain. It carries the heated air to your nozzle, and the station uses a magnetic induction automatic sleep function that reacts when you place the handle in its holder. Seat the handle fully in the holder and the station drops into sleep mode. If the handle sits crooked, the sleep function fails to trigger, so check the seating first when your station stays active. The handle assembly measures 120 cm in length, which gives you room to angle the gun around a PCB holder or a microscope stand without dragging the cable.

Repair Workflow Fit

Hot air handles earn their place in chip-level work. On a dead phone, you lift the shield, preheat the board, and ease an eMMC, CPU, or power IC free with controlled airflow before you reball and reflow it. The 2020D handle supports that routine along with SMD component replacement, glue removal, heat shrinking, drying, and preheating. Switch between straight and spiral airflow on the station and match the nozzle to the job: a narrow straight nozzle for a single capacitor, a wider spiral nozzle for a large BGA package. Technicians use this workflow on boards with charging issue, display problem, or dead after flash symptoms once the fault traces to a failed or lifted IC. Keep a multimeter and a microscope beside the station to confirm shorts before and after rework, and clamp the board in a PCB holder so the airflow stays steady across the footprint.

Why Match the Handle to Your Station

Handle listings differ by station family, so confirm your station reads 2020D before you order. A matched part protects your temperature control and your connector pins, and it keeps downtime short when a gun fails in the middle of a job. Workshops that run daily IC changes benefit most, because a spare handle on the shelf means your rework bench never waits on a courier. Browse the Hot Air Stations and Soldering Stations categories at Mechanicpk for nozzles, reballing kits, and related spares, and stock your bench in one order. The Sugon 2020D heat gun handle gives your station the same hot air gun fit it had on day one, so you return to board-level repair without recalibrating your habits.

Additional information
Weight0.9 kg
Q & A
Please login to post questions

Key Features

  • Dedicated replacement handle for the Sugon 2020D station
  • Restores hot air delivery after gun failure
  • Works with the 2020D straight and spiral airflow modes
  • Supports the station’s magnetic induction automatic sleep function when seated in the holder
  • 120 cm handle assembly length for flexible board positioning
  • Suits the station’s 100–500°C temperature range
  • Keeps the 2020D’s airflow of up to 100 litres per minute available at the nozzle
  • Single-piece replacement for fast bench recovery

Specifications

BrandSugon
Model2020D hot air gun handle
CategoryHot Air Gun Handle / Rework Station Spare Part
CompatibilitySugon 2020D hot air rework station
Handle Assembly Length120 cm
Package Contents1 x Handle

Common Repair Uses

  • Hot air rework on mobile phone boards and PCBs
  • IC removal and reflow on dead phone boards
  • BGA chip lifting before reballing
  • SMD component replacement
  • CPU and eMMC rework preparation
  • Board preheating before chip removal
  • Glue removal around ICs
  • Heat shrinking
  • Drying boards after cleaning

Compatible Devices

  • Sugon 2020D hot air rework station (station-specific part, not phone-model specific)
  • Sugon 2020D hot air rework station
  • Straight-air and spiral-air nozzle sets used with the 2020D
  • Mobile phone logic board rework performed on the 2020D
  • PCB-level BGA rework performed on the 2020D
  • SMD component rework performed on the 2020D
  • CPU and IC chip rework performed on the 2020D

FAQ

What is the product name?
The product name is Sugon 2020D/212 Heat Gun Handle.
What is the brand of this product?
The brand of this product is Sugon.
What is the model of this product?
The model of this product is the 2020D hot air gun handle.
What is this product used for?
This product replaces the hot air gun handle on a Sugon 2020D rework station for IC removal, BGA and SMD rework, and board preheating.
Which devices are compatible with this product?
This product is compatible with the Sugon 2020D hot air rework station.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does this handle fit other hot air stations besides the Sugon 2020D?
Compatibility is verified for the Sugon 2020D only. Handles differ by station family, so match your station model before you order.
Why does my 2020D not enter automatic sleep when I place the handle in the holder?
The 2020D uses a magnetic induction sleep function. Seat the handle fully in its holder, because a handle that sits incorrectly stops the sleep function from triggering.