JCID V1SE 12-15 True Tone Repair Adaptor for iPhone
₨ 7,500
JCID V1SE True Tone Adaptor
The JCID V1SE 12-15 True Tone Repair Adaptor adds iPhone 12 to 15 Plus display support to your V1SE programmer. You read the screen data, write it back, and restore True Tone after a screen replacement. The board handles original screens and third-party panels, so your bench covers both common jobs. It covers iPhone 12, 12 mini, 12 Pro, 12 Pro Max, 13, 13 mini, 14, 14 Plus, 15 and 15 Plus. It works with the V1SE, V1SE WiFi and V1S Pro, and it does not work with the standard V1S. Pro models from the 13 Pro upward need JCID’s separate Pro adaptor.
In stock
JCID V1SE 12-15 True Tone Repair Adaptor for Screen Replacement Jobs
The JCID V1SE 12-15 True Tone Repair Adaptor gives your V1SE programmer a dedicated board for iPhone 12 to 15 Plus displays. After a screen replacement, the phone often loses True Tone, and your customer notices the display looks different. This board reads the screen data and writes it back, so True Tone returns on original and third-party panels. JCID designs it for the V1SE platform, and it also pairs with the V1S Pro programmer.
Board Capability and Programmer Match
You plug the replacement screen into the adaptor, connect the adaptor to the V1SE host, and run the True Tone function in the programmer software. The software reads the screen information automatically and gives you a one-click repair, so you skip manual data handling. JCID lists support for original-screen True Tone transfer and for brand-screen repair, which is why the board carries the “2-in-1” label in the company’s own documentation. Distributor listings also name third-party panel makers it supports, including ZY, SL, RJ, JK, GX, JH, XY and GK.
Check programmer compatibility before you buy. The 12-15 board works with the V1SE, the V1SE WiFi and the V1S Pro. JCID states the 12-14 True Tone board cannot run on the standard V1S, so a V1S owner needs a different upgrade path.
Where It Fits in Your Repair Workflow
Display swaps on iPhone 12 to 15 Plus models make up a steady share of workshop volume. A typical job starts with a display problem, such as a cracked panel or dead touch, and ends with a replacement screen that works but shows no True Tone. This adaptor closes that gap at the programming step, after the screen fit and before the final test. You keep the job on your bench and avoid sending the phone back or telling the customer the feature stays off.
Pair the adaptor with the tools around your display workflow: a hot air station and soldering station for board-level work, a microscope for flex and connector inspection, a multimeter for continuity checks, and a PCB holder to keep the phone steady while you work. The V1SE programmer remains the hub, and each adaptor you add extends the models it handles.
Which iPhone Models This Board Covers
This board covers iPhone 12, 12 mini, 12 Pro, 12 Pro Max, 13, 13 mini, 14, 14 Plus, 15 and 15 Plus. JCID sells a separate 13-15 Pro adaptor for iPhone 13 Pro, 13 Pro Max, 14 Pro, 14 Pro Max, 15 Pro and 15 Pro Max, and a separate board for the 16 series. If your shop handles mixed models, you will likely need more than one adaptor, and matching the board to the model before you start saves you a failed attempt.
Why Technicians Pick This Adaptor
You add one small board instead of a new programmer. It extends a V1SE you already own across four iPhone generations. It handles the service your customers ask for most after a screen swap, and it fits the same bench routine you already run for battery, camera and other programmer tasks.
| Weight | 0.5 kg |
|---|
Key Features
- ✓Adds iPhone 12 to 15 Plus True Tone repair to the V1SE
- ✓Works with V1SE, V1SE WiFi and V1S Pro
- ✓Reads screen information automatically
- ✓One-click True Tone repair in the programmer software
- ✓Handles original screens and third-party panels
- ✓Compact board that plugs into the programmer setup
- ✓Extends an existing V1SE without a new host unit
- ✓Fits the screen-replacement stage of the repair workflow
Specifications
| Brand | JCID |
|---|---|
| Model | V1SE 12-15 True Tone Repair Adaptor |
| Category | iPhone Programmer Adaptors |
| Compatibility | JCID V1SE, V1SE WiFi, V1S Pro (not compatible with standard V1S) |
| Supported Devices | iPhone 12, 12 mini, 12 Pro, 12 Pro Max, 13, 13 mini, 14, 14 Plus, 15, 15 Plus |
| Technology | Screen True Tone data read and write |
| Material | PCB |
Common Repair Uses
- ✓True Tone restoration after iPhone display replacement
- ✓Restoring True Tone after a screen replacement
- ✓Transferring True Tone data with an original screen
- ✓Repairing True Tone on third-party replacement screens
- ✓Reading screen information through the V1SE programmer
- ✓Writing screen data back with one-click repair
- ✓Fixing display colour behaviour after a display problem repair
- ✓Finishing display swaps on iPhone 12 to 15 Plus models in the workshop
- ✓Final programming step before quality testing a repaired iPhone
Compatible Devices
- ✓iPhone 12 to 15 Plus series screens, original and third-party
- ✓iPhone 12 mini
- ✓iPhone 12
- ✓iPhone 12 Pro
- ✓iPhone 12 Pro Max
- ✓iPhone 13 mini
- ✓iPhone 13
- ✓iPhone 14 and 14 Plus
- ✓iPhone 15 and 15 Plus
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can I use the JCID 12-15 True Tone adaptor with the standard V1S programmer?
Does this adaptor support iPhone 13 Pro, 14 Pro and 15 Pro screens?
Related products
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



