RF4 RF-G30 Zero X2 Adhesive Glue 60ML
₨ 1,600
Zero Benzene Mobile Repair Glue
The RF4 RF-G30 Zero X2 Adhesive Glue gives your bench a zero benzene mobile repair glue in a 60ML tubular bottle with a precision tip. The black, fast-dry formula bonds display frames, rear glass covers, brackets and modules, and it fixes glass to plastic housings after a screen or back glass replacement. The black colour lets you see every bead you lay down, and the benzene-free solvent base gives you a less odorous experience than older workshop adhesives. If your shop handles daily display problem jobs and back glass replacements, the large 60ML bottle stretches across many repairs.
In stock
Zero Benzene Mobile Repair Glue for Frame and Glass Bonding
The RF4 RF-G30 is a zero benzene mobile repair glue for technicians who reseat frames, glass and covers every day. This 60ML black adhesive, sold here as the RF4 RF-G30 Zero X2, dries fast and delivers high adhesion, so you move from bonding to final testing sooner. RF4 supplies it in a tubular bottle with a tip, which lets you lay a controlled bead along a frame edge instead of flooding the joint. If your bench handles a steady stream of back glass jobs and display problem repairs, a 60ML bottle gives you volume that suits a working workshop.
Formula and Application Control
The benzene-free solvent formulation separates the RF-G30 from older adhesives that fill a small repair room with fumes. Technicians who work long shifts notice the reduced odour first, and shop owners who care about workshop air quality get a cleaner option for their staff. The black colour serves a practical purpose: you see exactly where the bead sits, which helps you check coverage before you press the parts together. The precision tip controls flow, so you place adhesive on the frame channel, the bracket seat or the glass perimeter and keep it away from the display flex and the board. Cap the bottle after each use to keep the nozzle usable for the next job.
Where RF-G30 Fits in the Repair Workflow
After you separate a damaged screen with a hot air station and clean the old adhesive from the frame, the RF-G30 becomes the bonding step before final assembly. Display frame bonding is the main job: you seat the new display, bond the frame and press the assembly into position. Rear glass cover attachment follows the same logic on handsets with glass backs. Beyond frames and covers, you use this glue for bracket and module fixation, glass-to-plastic housing repair and structural reinforcement of portable devices. Keep a PCB holder and a microscope at your station for the prep work, because clean surfaces decide how well any adhesive bonds. Test the board with a multimeter before you close the device, since no glue fixes a charging issue or a dead phone caused by a hardware fault.
Buying Guide for Repair Shops
Pakistani repair shops buy adhesive by the bottle, so the 60ML size matters for benches that finish many frame and back glass jobs each week. You get fast-dry behaviour for a high-throughput bench, a black finish for visual control and a zero benzene formula for a cleaner workspace in one bottle. If you build out a full bench, pair this glue with hot air stations for separation, soldering stations for board work, reballing kits for IC jobs and test boxes for post-repair checks. RF4 also makes repair fixtures and glue removers, so you can source the prep and bonding steps from one brand.
| Weight | 0.25 kg |
|---|
Key Features
- ✓Zero benzene solvent formulation
- ✓Black adhesive for visual application control
- ✓Fast-dry behaviour
- ✓High adhesion bond strength
- ✓Tubular bottle with tip for precise dispensing
- ✓Large 60ML volume for workshop use
Specifications
| Brand | RF4 |
|---|---|
| Model | RF-G30 |
| Category | Mobile Repair Adhesive (Frame, Glass and Cover Bonding) |
| Compatibility | Universal — mobile phone frame, glass and cover bonding, not device-specific |
| Supported Devices | Universal — not device-specific |
| Technology | Zero benzene, fast-dry black adhesive, 60 mL |
| Weight | 55 g |
| Dimensions | 230 × 90 × 30 mm |
Common Repair Uses
- ✓Bonding and fixation work during screen, back glass and housing repairs
- ✓Mobile phone display frame bonding
- ✓Rear glass cover attachment
- ✓Bracket and module fixation
- ✓Glass-to-plastic housing repair
- ✓Structural reinforcement of portable devices
Compatible Devices
- ✓Universal — suited to mobile phone and portable device assemblies, not device-specific
- ✓Mobile phone display frames
- ✓Rear glass covers
- ✓Brackets inside portable devices
- ✓Modules that need fixation
- ✓Glass-to-plastic housings
- ✓Portable devices needing structural reinforcement
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Is the RF4 RF-G30 glue benzene-free?
Can I use RF4 RF-G30 for rear glass and display frame bonding?
Related products
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



