One-Stop 0.035mm LCD Cutting Wire 100M

₨ 150

0.035mm LCD Cutting Wire, 100M Roll

The One-Stop LCD cutting wire 0.035mm gives your bench a 100-meter roll of ultra-fine separation wire for splitting front glass from LCD and OLED panels. The 0.035mm diameter slides into narrow adhesive gaps, so you cut through the bond layer with less prying force on the display. Screen refurbishing workshops, glass replacement counters, and repair shops handling display problem jobs use it for clean glass-to-panel separation on smartphone and tablet screens. The long roll covers high-volume daily work, so you keep cutting without frequent restocking.

In stock

14 People watching this product now!
Description

LCD Cutting Wire 0.035mm for Precision Glass-to-Panel Separation

The One-Stop LCD cutting wire 0.035mm packs 100 meters of fine separation wire into a single roll built for LCD and OLED screen refurbishing. At this diameter, the wire enters the thin adhesive line between front glass and display panel without forcing the layers apart. Technicians who separate cracked glass every day pick a fine gauge when the panel carries real value and a scratched polarizer or damaged OLED layer wipes out the margin on the job.

Why 0.035mm Diameter Matters on Modern Displays

Glass separation succeeds or fails on how little material enters the gap. A thicker wire needs a wider channel, so you pry, flex the glass, and risk cracking the panel underneath. The 0.035mm wire needs far less clearance, so it travels through the adhesive layer with a lighter pull. You gain the most on slim-bezel screens and curved-edge displays, where the bond line sits tight and every extra bit of force shows up as a flaw on the panel.
Fine wire also demands good technique. Keep the wire taut, hold a steady cutting angle, and work in short passes rather than yanking. A kinked or frayed section loses its cutting edge, so cut that section off and continue from clean wire. The long roll makes that trimming cheap.

Where It Fits in the Screen Refurbishing Workflow

Separation sits at the start of every glass-replacement job. You soften the adhesive with heat from a hot air station or heating plate, secure the screen in a holder, then pass the wire along the glass edge to free it from the LCD or OLED panel. After the cut, you clean the leftover adhesive and inspect the panel edges under a microscope before you bond new glass. Good separation upstream saves time at every later stage, because a panel that comes out clean needs less cleaning and less rework.
This wire also supports the display-side jobs that follow a hardware fault diagnosis. When a dead phone arrives with a broken screen, you separate the glass, confirm whether the panel still works, and decide between a glass-only repair and a full display replacement. A reliable fine wire turns that decision into a quick, low-risk step instead of a gamble.
Pair the wire with the rest of your bench: hot air stations for adhesive softening, PCB holders and fixtures for stable positioning, and microscopes for edge inspection. Technicians who also repair boards often keep soldering stations and multimeters within reach on the same bench, so the display and board work flow together.

100M Roll for Workshop Volume

A 100-meter roll changes the economics of daily refurbishing. Each cut uses a short length, so one roll serves a busy workshop for a long stretch. You replace worn wire freely instead of stretching a damaged section, and that habit protects panels better than a cheap wire pushed past its limit. Shop owners who run several technicians on glass work benefit most, since a single roll supports shared stock without constant reordering.
Choose the 0.035mm gauge when your jobs lean toward delicate screens and tight gaps. Keep a thicker gauge for rougher, wider-gap work if your workshop handles both, and match the wire to the screen rather than using one size for everything.
This item suits technicians, refurbishing workshops, and repair shops across Pakistan that want a dependable fine separation wire in a long roll format. It arrives as a consumable for the separation step, so plan your stock around how many screens you open each week.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • 0.035mm ultra-fine diameter for narrow adhesive gaps
  • 100-meter roll for high-volume workshop use
  • Suited to LCD and OLED screen separation
  • Works on smartphone and tablet displays
  • Supports clean glass-to-panel separation with lighter force
  • Fits manual and workshop separation workflows
  • Practical consumable for refurbishing benches
  • Matches delicate jobs where panel value is high

Specifications

BrandOne-Stop
CategoryLCD/OLED Screen Separation Wire (Mobile Repair Tools)
CompatibilitySmartphone and tablet LCD/OLED screen separation
DimensionsWire diameter 0.035mm; length 100M

Common Repair Uses

  • Glass-to-panel separation in screen refurbishing and glass replacement
  • Separating cracked front glass from LCD panels
  • Separating front glass from OLED panels
  • Cutting through adhesive on slim-bezel screens
  • Glass-only replacement jobs
  • Tablet screen separation
  • Screen refurbishing at volume
  • Checking panel condition on a dead phone with broken glass
  • Preparing a panel for cleaning and re-bonding

Compatible Devices

  • Universal separation consumable, not device-specific; used on smartphone and tablet LCD/OLED glass-to-panel separation
  • Samsung smartphone displays
  • iPhone displays
  • LG smartphone displays
  • Android smartphone LCD screens
  • OLED smartphone screens
  • Slim-bezel display panels
  • Tablet LCD screens
  • Refurbishing workshop glass-separation setups

FAQ

What is the product name?
The product name is One-Stop LCD Cutting Wire 0.035mm (100M).
What is the brand of this product?
The brand of this product is One-Stop.
What is this product used for?
This product separates front glass from LCD and OLED panels during screen refurbishing and glass replacement.
Which devices are compatible with this product?
This product suits smartphone and tablet LCD/OLED screen separation. It is a universal consumable and not tied to one device model.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What does the 0.035mm diameter do for screen separation?
The 0.035mm diameter slips into narrow adhesive gaps between glass and panel, so you cut with less force than a thicker wire needs.
How long is the roll and how many screens does it cover?
The roll measures 100 meters. Each cut uses a short length, so one roll supports many screens, and the exact count depends on screen size and how often you trim damaged wire.
When should I replace the cutting wire during a job?
Cut off and replace any section that kinks or frays, because damaged wire cuts poorly and raises the risk of scratching the panel.