Sunshine C210-SK Soldering Tip for T210 Handle
₨ 800
Sunshine C210-SK Tip for T210 Handles
The Sunshine C210-SK soldering tip gives your bench an integrated heater-and-tip cartridge built for T210, T26 and S210 style handles. The C210 series heats the working surface within about a second and tins quickly. Multilayer nano-plating and a stainless steel housing keep heat loss low and slow oxidation on lead-free work. You insert the cartridge into the handle with no disassembly, then use it for drag soldering, pad cleaning, jumper wire work and flux residue removal on mobile phone boards. Pair it with your T210 soldering station and keep a spare in the drawer for daily workshop use.
In stock
Sunshine C210-SK Soldering Tip for T210 Handle Rework
The Sunshine C210-SK soldering tip belongs to the C210 cartridge family, where the heating element and the tip sit in one integrated unit. You slide it into a T210-class handle, set your station and start working, with no tip-and-heater assembly to rebuild. The SK profile suits knife-style contact work, so it covers the broad pad and edge jobs that a fine point handles poorly. If your bench already runs a T210, T26 or S210 handle, this cartridge adds a dedicated tool for board cleanup and drag soldering.
Integrated Cartridge Design and Heat Behaviour
Sunshine builds the C210 series around a short thermal path. The heater sits directly behind the working surface, so the tip reaches working temperature in about a second and holds it as you move between pads. Listings for the series describe a stainless steel housing that limits heat loss and a multilayer nano-electroplated surface that resists oxidation and corrosion. That combination matters on a busy repair bench. A tip that oxidises quickly refuses to wet, and you waste time scrubbing and re-tinning it between boards.
Because the heater lives inside the cartridge, you replace the whole unit when it wears out. You do not open the handle or chase a loose element. The series also targets lead-free solder, which most Pakistani workshops now meet on newer boards. Keep flux on the pad and keep your station at a stable setting, and the plated surface tins cleanly and stays bright longer.
Where the SK Profile Fits on a Repair Bench
Knife-profile tips earn their place after IC change karna. Once you lift an eMMC, CPU or power IC with your hot air station, the pads underneath carry uneven solder and flux residue. You drag the C210-SK across the pad rows, flatten the solder and wipe the residue away before you reball or place the next chip. The same tip handles jumper lagana on dead phone boards. You tin a trace, lay the wire and re-melt the joint without bridging the neighbouring pads.
Charging issue repairs also keep this tip busy. A worn charging port or a lifted pad on a USB connector needs controlled heat on a wide pad, and the knife edge delivers it. Display problem repairs call for the same tool when you re-tin flex connector pads. Under a microscope you see the solder flow evenly along the edge instead of balling at a point. For fine-pitch micro-components, switch to a pointed C210 tip. For flattening, cleaning and drag work, the SK stays in the handle.
Handle Compatibility and Station Pairing
Sunshine lists the C210 series for T210, T26 and S210 handles, and several retailers also name JBC T210 handpieces, Sugon stations and GVM T210 stations. Check your handle’s cartridge socket before you buy, since the series uses a plug-in fit, not a screw-on tip. Your station supplies the temperature control, so the cartridge works only as well as the station behind it. A reliable T210 soldering station with stable regulation brings out the best from this tip.
Build the rest of the workflow around it. A hot air station lifts the ICs, a microscope shows you the pad condition, a multimeter confirms continuity after each jumper, and a PCB holder keeps the board still while you drag solder. Reballing kits and fresh flux complete the chain. Stock the C210-SK next to your pointed C210 tips, and you cover cleanup, jumper work and fine soldering from one handle.
| Weight | 0.3 kg |
|---|
Key Features
- ✓Integrated heater-and-tip cartridge design
- ✓About 1 second heat-up and 2 second tinning on the C210 series
- ✓Multilayer nano-electroplated working surface
- ✓Stainless steel housing that limits heat loss
- ✓Suitable for lead-free soldering
- ✓Plug-in installation with no handle disassembly
- ✓Fits T210, T26 and S210 handles
- ✓Knife-style SK profile for drag soldering and pad cleaning
Specifications
| Brand | Sunshine |
|---|---|
| Model | C210-SK |
| Category | Soldering Iron Tips |
| Compatibility | T210, T26 and S210 soldering handles |
| Technology | Integrated heater-and-tip cartridge with multilayer nano-electroplating |
| Material | Copper core with nano-plated surface and stainless steel housing |
Common Repair Uses
- ✓Board-level soldering and cleanup on mobile phone PCBs.
- ✓Drag soldering on pad rows
- ✓Pad cleaning after IC removal
- ✓Flux and solder residue removal
- ✓Jumper wire soldering on dead phone boards
- ✓Charging port pad touch-up
- ✓Pad tinning before reballing
- ✓Desoldering flying leads on boards
- ✓Flex connector re-tinning for display problem repairs
Compatible Devices
- ✓Universal soldering tip for T210-class handles. It is not tied to specific phone models, so it works on any mobile board you can reach.
- ✓T210 soldering handle
- ✓T26 soldering handle
- ✓S210 soldering station handle
- ✓JBC T210 handpieces (named in retailer listings)
- ✓Sugon T26 series stations (named in retailer listings)
- ✓GVM T210 soldering stations
- ✓Android phone motherboards (universal, not device-specific)
- ✓iPhone logic boards (universal, not device-specific)
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which handles and stations accept the Sunshine C210-SK tip?
Can the C210-SK tip handle lead-free solder on mobile boards?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock



