Kada 2018D+ Curved Nozzle Set (3Pcs) Original
₨ 2,000 Original price was: ₨ 2,000.₨ 1,500Current price is: ₨ 1,500.
Kada 2018D+ Curved Nozzle Set
The Kada 2018D+ curved nozzle set gives your hot air rework station a bent airflow path for tight board areas. Each pack contains three original Kada curved nozzles that replace worn or deformed tips on the Kada 2018D+ hot air station. The curved profile lets you aim heat at a target IC while you keep the chip in direct view under your microscope. You get cleaner access around shield cans, connectors, and tall neighbouring components on Android and iPhone boards. Keep a spare set on your bench so a damaged nozzle never stops your next IC change or reballing job.
In stock
Kada 2018D+ Curved Nozzle Set for Precision Hot Air Rework
The Kada 2018D+ curved nozzle set gives your hot air station a bent airflow path for board areas where a straight nozzle blocks your view or heats the wrong parts. The pack contains three original Kada curved nozzles, made to replace worn tips on the Kada 2018D+ hot air rework station. When your current nozzles lose shape, discolour heavily, or leak air at the joint, this set restores controlled heat delivery to the chip you work on.
Why a Curved Nozzle Changes Your Working Angle
A straight nozzle forces you to hold the handle upright over the chip. That posture hides the target IC under the handle and puts the airflow close to every part around it. A curved nozzle bends the outlet away from the handle, so you see the chip while you heat it. You also steer the airflow along the board instead of straight down, which helps when a tall connector, shield can, or battery socket sits next to the component you want to lift. On dense phone motherboards, that small change in angle protects neighbouring parts and gives you steadier control during an IC change.
Where It Fits in Your Repair Workflow
You reach for this set at the rework stage of board-level repair. Typical jobs include removing and refitting a charging IC, power IC, audio IC, or display connector after you trace a hardware fault with a multimeter. The nozzles also support eMMC and CPU removal when you match the nozzle opening to the chip footprint, and they help during reballing prep when you need even heat across a BGA package. Pair them with a quality flux, a PCB holder, and a reballing kit, and the Kada 2018D+ station handles dead phone boards, charging issues, and no-display faults with more control. Many technicians keep one straight nozzle set and one curved set on the bench, then switch based on how crowded the board is.
Fitment and Handling Notes
Match each nozzle to the Kada 2018D+ hot air handle before you power the station. Fit the nozzle snugly so air exits through the opening and not through a gap at the joint, because a loose joint wastes heat and shifts the temperature at the chip. Let the nozzle cool before you remove it, and keep spare nozzles in a dry drawer to protect the finish. Check the nozzle opening against your target chip before you heat, since an opening that is too wide spreads heat onto surrounding parts and one that is too narrow leaves the edges of the chip cold. Replace a nozzle once the tip bends out of shape or the air path becomes uneven.
Why Technicians Choose Original Kada Accessories
A station performs only as well as the nozzle that shapes its airflow. Original Kada nozzles keep the fit and airflow path that the 2018D+ handle expects, which reduces leakage and temperature drift at the chip. For repair shops, service centres, and training labs that run the Kada 2018D+ every day, a spare curved set cuts downtime and keeps your soldering and rework results repeatable. Browse our hot air stations, soldering stations, microscopes, and PCB holders to complete the bench around this set.
| Weight | 0.9 kg |
|---|
Key Features
- ✓Pack of 3 original Kada curved nozzles
- ✓Made for the Kada 2018D+ hot air station
- ✓Curved outlet keeps the target chip in view
- ✓Directs airflow away from neighbouring parts
- ✓Suits tight and crowded phone motherboard layouts
- ✓Replaces worn or deformed nozzles
- ✓Supports IC change, connector rework, and reballing prep
- ✓Works as a spare set beside your straight nozzles
Specifications
| Brand | Kada |
|---|---|
| Model | 2018D+ Curved Nozzle Set |
| Category | Hot Air Station Nozzles |
| Compatibility | Kada 2018D+ hot air rework station |
| Technology | Hot air SMD rework |
| Pack Quantity | 3 pcs |
Common Repair Uses
- ✓Hot air rework on mobile phone PCBs
- ✓Charging IC removal and refitting
- ✓Power IC change karna on dead phone boards
- ✓Audio IC and codec rework
- ✓Display connector and FPC connector removal
- ✓eMMC and CPU removal with correctly matched nozzle opening
- ✓Reballing preparation and BGA reflow
- ✓Heating near shield cans and tall components
- ✓Board cleaning and flux reflow
Compatible Devices
- ✓Fits the Kada 2018D+ hot air station; board-level scope is universal across phone brands, not device-specific
- ✓Kada 2018D+ hot air rework station
- ✓Samsung Android motherboards
- ✓Oppo and Vivo motherboards
- ✓Infinix and Tecno motherboards
- ✓Xiaomi and Realme motherboards
- ✓iPhone logic boards
- ✓Charging and power IC areas on phone PCBs
- ✓Display and battery connector zones on phone PCBs
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Why use a curved nozzle instead of a straight nozzle for IC change karna on a phone board?
How do I pick the right nozzle opening for an eMMC or CPU on a dead phone board?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock



