2UUL SD92 Scroo Screwdriver 5Pcs Set New Version
₨ 5,000 Original price was: ₨ 5,000.₨ 4,500Current price is: ₨ 4,500.
2UUL SD92 Five-Driver Precision Set
The 2UUL SD92 screwdriver set packs five dedicated drivers into one compact kit: Pentalobe P2 0.8mm, Phillips PH000 1.2mm, Tri-Point Y0.6, Torx T2, and Convex Cross 2.5mm. Each driver carries an S2 chrome vanadium steel tip with nickel electroplating and an aluminium handle, and the full tool measures 12.5 cm. Because each tip is fixed to its own handle, you pick up the right driver instantly and skip the bit-swapping step. Mobile repair technicians use this precision screwdriver set for mobile repair when they open iPhones, Android phones, tablets, and other small electronics for display problem jobs, charging issue repairs, and battery replacement.
In stock
2UUL SD92 Screwdriver Set for Mobile Repair Benches
The 2UUL SD92 screwdriver set targets technicians who open handsets all day and need each screw type covered without hunting through a bit case. The new version keeps the proven Scroo layout: five separate drivers, each permanently fitted with one tip profile. You reach for the Pentalobe P2 0.8mm to open the bottom screws on iPhones, the PH000 1.2mm for Phillips screws, the Y0.6 for Tri-Point fasteners, the T2 for Torx screws, and the Convex Cross 2.5mm for convex cross screws found inside iPhone models.
Tip Profiles and Steel Construction
Every tip uses S2 chrome vanadium steel, a tool-steel grade that resists the torque and wear that soft tips lose within weeks of daily workshop use. A nickel electroplated finish gives the silver tips surface protection against corrosion. The tips stay fixed to the handle, so no bit slot loosens and no bit wobbles in a chuck. That rigid fit matters on tiny screws, because a driver that sits straight in the screw head cuts down cam-out and stripped heads on delicate boards. When you work through a hardware fault diagnosis, you open the device cleanly the first time and keep every screw intact for reassembly.
Handle Design and Bench Handling
The aluminium handle gives the driver a firm weight in your fingers, and at 12.5 cm total length the driver reaches into recessed screw wells without feeling oversized. You hold five slim handles side by side in a pouch or tool roll, so you grab the correct profile by feel and feed it straight into the screw. Technicians who repair dozens of devices a day gain real time from that single motion, especially on repeat jobs such as hang on logo cases, charging port replacements, and screen swaps where the same screw set appears again and again.
Where This Set Fits in the Repair Workflow
This kit handles the opening and closing stages of every repair, the steps before and after the real board work. After you open the device, you move on to a microscope for inspection, a PCB holder for stable board handling, a soldering station or hot air station for rework, and a multimeter for fault tracing. The SD92 set starts that chain and finishes it, so a worn or wrong-profile driver becomes the first point where a clean repair goes wrong. Shops that upgrade from generic bundled screwdrivers to a dedicated driver set notice fewer damaged screws and faster teardown on boot loop issue and dead phone cases that need full disassembly.
Choosing This Set for Your Shop
Compare the SD92 against loose bit kits and you see the trade-off clearly: a fixed-tip driver gives faster access and a more rigid fit, while a bit kit gives wider profile range. Mechanicpk supplies the SD92 for technicians who want a compact, dependable five-profile solution for daily phone and tablet work. If your workflow also includes laptops, smartwatches, or specialty profiles, pair this set with a broader precision bit kit from the same repair tools range.
| Weight | 0.4 kg |
|---|
Key Features
- ✓Five dedicated drivers in one set: P2 0.8mm, PH000 1.2mm, Y0.6, T2, Convex Cross 2.5mm
- ✓S2 chrome vanadium steel tips for wear resistance
- ✓Nickel electroplated silver finish for surface protection
- ✓Aluminium handle for a firm, controlled grip
- ✓Fixed tips eliminate bit wobble and slot looseness
- ✓12.5 cm length reaches recessed screw wells
- ✓Compact set that fits a bench pouch or tool roll
- ✓New version of the established 2UUL Scroo series
Specifications
| Brand | 2UUL |
|---|---|
| Model | SD92 Scroo New Version |
| Category | Precision Screwdriver Set |
| Compatibility | Universal precision repair use |
| Supported Devices | Smartphones, tablets, laptops, and other small electronics |
| Material | Aluminium handle with S2 chrome vanadium steel tip, nickel electroplated |
| Dimensions | Total length 12.5 cm per driver |
Common Repair Uses
- ✓Opening, servicing, and reassembling phones and small electronics
- ✓Removing iPhone bottom screws before screen separation
- ✓Display replacement for display problem jobs
- ✓Charging port repair for charging issue cases
- ✓Battery replacement
- ✓Internal shield and connector bracket removal
- ✓Full teardown for hardware fault diagnosis
- ✓Opening devices stuck with boot loop issue or hang on logo faults
- ✓Tablet and small electronics disassembly
Compatible Devices
- ✓Universal precision screw profiles covering phones, tablets, and small electronics (screw-head scope, not device-locked)
- ✓iPhone models (Pentalobe P2 0.8mm bottom screws)
- ✓iPhone internal Phillips screws (PH000 1.2mm)
- ✓iPhone models with convex cross screws, except iPhone 6s (Convex Cross 2.5mm)
- ✓Android smartphones using Torx T2 screws
- ✓Devices with Tri-Point Y0.6 screws
- ✓Tablets
- ✓Laptops with small precision screws
- ✓Other small electronics using these five profiles
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can I replace the tips on the 2UUL SD92?
Which iPhone screws does the SD92 set open?
Related products
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



