One-Stop Knife # 04 Blade (10pcs Each)

₨ 1

One-Stop Knife 04 Blade Pack

One-Stop Knife # 04 Blade (10pcs Each) gives your repair bench ten fresh edges for board-level cleaning. You swap in a sharp blade the moment the old one drags, so glue scraping, residue cleaning and pad prep stay controlled on every dead phone that lands on your desk. This one-stop knife 04 blade pack suits technicians who handle hardware fault jobs daily and want consistent cutting contact instead of improvised tools. Pair it with a microscope, a PCB holder and a hot air station for clean, repeatable results. Mechanicpk ships it across Pakistan for workshops, service centers and independent technicians.

Out of stock

17 People watching this product now!
Description

One-Stop Knife 04 Blade for Board-Level Cleaning

The One-Stop Knife # 04 Blade (10pcs Each) gives your repair bench a fresh cutting edge for the jobs that wear blades down fastest: scraping glue, lifting residue and cleaning around chips on a dead phone’s motherboard. Each pack holds 10 blades, so you swap a dull edge for a sharp one instead of forcing a worn blade across a live board. Mechanicpk stocks this one-stop knife 04 blade pack for technicians who want precise, controlled contact and a predictable edge on every job. The number 04 identifies this blade within the One-Stop Knife range, which makes reordering the exact same blade simple. Technicians who run a daily repair queue treat blades like solder wire: a consumable you stock in bulk, not a tool you nurse along. That habit protects pads, keeps cleaning time predictable and prevents the scratches that turn a simple charging issue or display problem into a lifted-track repair.

Where the 04 Blade Fits in Your Repair Workflow

Board-level repair starts with a clean surface. Before IC change karna, you clear edge glue and old residue so the hot air station heats the chip evenly and the tweezers lift it without a fight. After the chip comes off, you scrape leftover residue from the pads, then move on to reballing or reflow. A sharp blade shortens that cleaning step and keeps your hand steady, because you apply light pressure instead of muscle. The same blade also helps when a hang on logo or dead after flash case turns out to be a hardware fault, since you need clear access to the suspect area before you test it with a multimeter or jump a broken track with a jumper lagana repair. CPU and NAND jobs follow the same logic. You clear residue around the chip edges first, lift the IC, and clean the board before you reball or reseat the part. Skipping the cleaning stage leaves old glue under the new chip and invites a network issue or an intermittent fault later.

Why a 10-Piece Pack Suits a Busy Workshop

A single blade dulls fast on glue, flux residue and underfill. A 10-piece pack means you never stretch one blade past its useful life, and you never stop a job to hunt for a replacement. Shop owners hand a few blades to each technician and track usage per week without extra purchase orders. Service centers that run several benches keep the pack on the shelf as a consumable, the same way they stock flux, solder wire and cleaning brushes. Because every blade in the pack carries the same 04 designation, your technicians get the same feel and the same results from the first blade to the tenth. Because the pack is a replaceable consumable, you also keep job costs predictable: one pack covers many boards, and a technician who changes blades on time damages fewer of them.

Handling Tips for Cleaner Results

Secure the board in a PCB holder before you start, so the board stays still while your hand moves. Work under a microscope when you clean near small components, and keep the blade at a low angle to the board surface. Soften stubborn glue with gentle heat from a hot air station or a soldering station instead of pushing harder with the blade. Replace the blade as soon as it skips or drags, because a worn edge slips off the glue and risks nicking nearby pads and traces. Wipe the area with a suitable board cleaner after scraping, then inspect the pads before you move on to the next stage of the repair. Store unused blades in their pack, away from moisture and loose screws, so the edge stays intact until you need it. Dispose of used blades safely and keep them away from the bench area where you handle bare boards.

Additional information
Weight0.5 kg
Q & A
Please login to post questions

Key Features

  • 10 blades in every pack
  • Blade number 04 for easy exact reorders
  • Replaces dull blades quickly on a busy bench
  • Suits glue, residue and pad cleaning work
  • Low-pressure cutting control on fine board areas
  • Fits board-level workflows alongside hot air and soldering stations
  • Consistent edge from the first blade to the tenth
  • Practical consumable for workshops and service centers

Specifications

Product EntityOne-Stop Knife # 04 Blade (10pcs Each)
Technology EntityHand-held precision blade for PCB cleaning
Compatible Device EntitiesSamsung, Oppo, Vivo, Infinix, Tecno, Xiaomi, Realme, iPhone
Repair Process EntityGlue removal, residue scraping, pad preparation, IC change
Industry EntityMobile phone repair, PCB repair, GSM workshop tools

Common Repair Uses

  • Board-level cleaning, glue scraping and pad preparation on mobile boards
  • Edge glue cleaning around ICs
  • Residue scraping before IC change karna
  • Pad cleaning before reballing
  • Flux and solder residue removal
  • Glue cleaning around CPU and NAND areas
  • UV glue residue cleaning
  • Board prep before hardware fault diagnosis
  • Spare blade stock for daily bench use

Compatible Devices

  • Universal — not device-specific; works on mobile phone and tablet boards where scraping and glue cleaning apply
  • Samsung motherboards
  • Oppo motherboards
  • Vivo motherboards
  • Infinix motherboards
  • Tecno motherboards
  • Xiaomi and Realme motherboards
  • iPhone logic boards
  • Tablet and small electronics PCBs

FAQ

What is the product name?
The product name is One-Stop Knife # 04 Blade (10pcs Each).
What is the model of this product?
The model of this product is One-Stop Knife # 04 Blade.
What is this product used for?
This product is used for glue scraping, residue cleaning and pad preparation during mobile board repair.
Which devices are compatible with this product?
The blade is universal and not device-specific. It works on mobile phone and tablet boards wherever scraping and glue cleaning apply.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
How many blades come in one One-Stop Knife 04 blade pack?
Each pack contains 10 blades of the 04 type.
When should you replace the blade during board work?
Replace the blade as soon as it drags or skips across the glue instead of cutting cleanly, because a worn edge slips and can nick nearby pads and traces.
How do you clean edge glue around an IC without damaging the board?
Secure the board in a PCB holder, soften the glue with gentle heat, keep the blade at a low angle and apply light pressure under a microscope.