One-Stop Knife #17 Blade 10pcs for Mobile Repair
₨ 99
#17 Blade Pack for Repair Benches
The One-Stop Knife #17 Blade pack gives you ten flat-profile replacement blades, built for a 17 blade for mobile repair workflow. The flat edge slides under glued back glass, frame adhesive and cured glue residue, so you separate parts without gouging the housing. You swap a dull edge in seconds and keep every cut clean. Warm the adhesive with your hot air station first, then lift with the blade. Keep a spare pack beside your microscope for board-side glue cleanup. Pakistani repair shops stock this pack for back glass jobs, frame prying and adhesive scraping.
In stock
17 Blade for Mobile Repair: Flat-Edge Replacement Blades for Daily Bench Work
A 17 blade for mobile repair earns its place on the bench because it is the cheapest consumable that decides whether a glued part comes off clean or cracked. The One-Stop Knife #17 Blade pack delivers ten flat chisel-style blades in one purchase. You load one into a standard #17 blade handle, work the adhesive line, and replace the edge the moment it drags. For a shop that opens phones all day, a full pack means you never stretch a worn blade across one more back glass.
Where the Flat #17 Profile Fits in Your Repair Workflow
The #17 shape is a flat, chisel-style blade. Its straight profile gives you a clear view of the work area and lets you push along a seam in a controlled line. That makes it a natural fit for glued assemblies: back glass on iPhone models, adhesive-sealed Android back covers, and frame-bonded parts that resist a plastic pry tool. You soften the adhesive with a hot air station or a heating pad, slide the edge into the seam, and work around the perimeter in short passes. Each pass cuts through the adhesive instead of levering against the glass.
Adhesive and Glue Cleanup on the Board and Frame
After separation, cured adhesive stays behind on the frame, bracket edges and board surface. The flat edge scrapes that residue off in thin layers, so you prepare a clean surface before refitting a new back glass or display. Hold the board in a PCB holder, work under a microscope, and keep the blade angle shallow around components. Reserve a fresh blade for any area near connectors, shields or the area around an IC, since a sharp edge removes glue with less pressure than a dull one. This matters on a hardware fault job where you already opened the board and cannot afford a slipped tool.
Why Technicians Stock Blades by the Pack
Blade condition changes every cut. A fresh edge separates glue with light pressure, while a worn one forces you to push harder and raises the risk of damage. Buying ten blades in one pack lets you assign a new edge to each new job and keep your workflow consistent. The pack also suits shops with several technicians, because each bench gets its own supply. If you service display problem and charging issue repairs that start with a glued back cover, you consume blades quickly, and a ten-piece pack keeps your tool tray stocked.
Handle Fit and Buying Notes
These blades fit standard #17 blade handles. Confirm your handle takes the #17 chisel shape before you order a large quantity. For a complete bench, add a knife handle set, a pry tool kit, tweezers and a reballing kit from Mechanicpk, and match the blade to the job: flat #17 for glued seams and glue scraping, finer blades for chip-level work. Handle every blade with care, store spares in their tube or tray, and dispose of used edges safely.
| Weight | 0.5 kg |
|---|
Key Features
- ✓Pack of 10 replacement #17 blades
- ✓Flat chisel-style profile for clean seam entry
- ✓Clear view of the work area along the cutting line
- ✓Suits glued back glass and frame adhesive
- ✓Scrapes cured glue residue in thin layers
- ✓Fits standard #17 blade handles
- ✓Quick blade changes keep every cut sharp
- ✓Stock-friendly pack for multi-technician shops
Specifications
| Brand | One-Stop |
|---|---|
| Model | #17 Blade (10pcs pack) |
| Category | Mobile Repair Knife Blades |
| Compatibility | Standard #17 chisel-blade knife handles |
| Supported Devices | Universal, not device-specific |
Common Repair Uses
- ✓Glued part separation and adhesive cleanup during phone and tablet repair.
- ✓Back glass separation after heating
- ✓Frame adhesive cutting
- ✓Cured glue scraping from housings
- ✓Adhesive cleanup before fitting a new back cover
- ✓Bracket and cover lifting
- ✓Display adhesive seam work
- ✓Board-side glue cleanup under a microscope
- ✓General bench cutting tasks
Compatible Devices
- ✓Universal manual repair blade. It works with any phone or tablet where a flat blade can reach the glued seam. It does not depend on a chipset or model.
- ✓iPhone back glass seams
- ✓Android glued back covers
- ✓Samsung frame and back panel adhesive
- ✓Oppo, Vivo, Infinix and Tecno adhesive-sealed housings
- ✓Tablet back panels and bonded frames
- ✓Phone mid-frame and bracket adhesive
- ✓Cured glue residue on housings
- ✓Board-side adhesive residue after disassembly



