Mechanic C91-UV Camera Filter Adhesive for Phone Repair
₨ 699
C91-UV Camera Filter Adhesive for Phone Repair
Mechanic C91-UV Camera Filter Adhesive gives you a thin, UV-cured glue built for CMOS filter replacement and camera module rebuilds. Mechanic makes the C91-UV more diluted than its C90-UV blue-ray adhesive, so it flows into fine filter edges and locks the package once your UV lamp hits it. The 3 g pack also handles Face ID FPC lens fixing and camera filter attachment on phones, iPads, and tablets. If your bench handles camera repair, the C91-UV camera filter adhesive from Mechanicpk covers the filter-fixing step with one dedicated product.
In stock
C91-UV Camera Filter Adhesive: Technical Overview for Repair Benches
The C91-UV camera filter adhesive from Mechanic targets one narrow job in camera repair: fixing the filter package after a CMOS filter replacement. Mechanic C91-UV Camera Filter Adhesive sits in a three-part camera glue range next to the C89 anti-shake adhesive and the C90-UV blue-ray adhesive. Each product covers a different stage of module work, and the C91-UV covers the filter stage. It is a UV adhesive for phone camera repair that cures only under UV light, ships in a 3 g pack, and uses a more diluted consistency than the C90-UV. That thinner body gives you controlled coverage around small filter edges instead of a heavy bead.
Where the C91-UV Fits in a Camera Repair Workflow
Camera work on a phone, iPad, or tablet follows a clear order. You separate the module, swap the damaged part, and rebuild the stack so the filter sits exactly where it belongs. The C91-UV covers the last step on the filter side. Mechanic positions it for CMOS filter replacement, where the glue fixes the packaged filter so it stays put after you close the module. Most technicians run this job under a microscope with the module clamped in a PCB holder, so the part stays still while you place the filter. Heat work on the main board, such as lifting a shield or reworking a connector with a hot air station or soldering station, belongs earlier in the job. Once the board side is done, you finish the camera side with this adhesive. That sequence keeps your camera repair clean and repeatable across a busy workshop day.
How the Thinner Formula Changes Your Application
Mechanic sells the C90-UV as the thicker option, designed to strengthen encapsulation during blue-ray camera replacement. The C91-UV takes the opposite approach. Mechanic makes it more diluted, so it spreads into narrow filter edges with less pressure and less build-up. Before you dispense, clean the lens and the contact surface to remove dust, oil, and residue. Then lay a thin, even line along the edges. Keep the bead small, because thin glue travels. After placement, expose the joint to your UV lamp. This adhesive needs UV illumination to cure, so set your lamp at the bench before you open the pack. Store the pack in a cool, dry spot away from direct sunlight so the contents stay usable between jobs.
Mechanic C91-UV Camera Filter Adhesive for Face ID FPC Lens and Filter Attachment Jobs
Supplier information lists the C91-UV for Face ID FPC lens fixing, and the same formula suits wider camera filter and lens attachment work. One 3 g pack covers filter swaps, Face ID FPC lens glue jobs, and general filter attachment on phones, iPads, and tablets. Choose the C89 when you fill optical stabilization holes on cameras with motors, the C90-UV for blue-ray replacement, and the C91-UV for filter work. Pakistani repair shops that handle daily camera complaints can stock all three and match each to its job, which prevents the wrong-glue mistakes that send a camera back to your bench. Mechanicpk supplies this adhesive alongside microscopes, PCB holders, and reballing kits, so you can build a complete camera-repair setup from one catalog.
| Weight | 0.3 kg |
|---|
Key Features
- ✓Dedicated camera filter adhesive for CMOS filter replacement
- ✓More diluted formula than the C90-UV blue-ray adhesive
- ✓UV light curing fixes the filter package in place
- ✓Suits Face ID FPC lens fixing
- ✓Covers camera filter and lens attachment jobs
- ✓Works on phone, iPad, and tablet camera repair
- ✓3 g pack sized for workshop use
- ✓Part of the Mechanic C89 / C90-UV / C91-UV camera glue range, so you choose by job
Specifications
| Brand | Mechanic |
|---|---|
| Model | C91-UV |
| Category | Camera Repair Adhesive (UV Glue) |
| Compatibility | Phone, iPad, and tablet camera modules (CMOS filter, camera filter, and lens attachment) |
| Technology | UV-light-cured adhesive (UV illumination required) |
| Net Content | 3 g |
Common Repair Uses
- ✓CMOS filter replacement in phone camera modules
- ✓Fixing the filter package after a camera module rebuild
- ✓Face ID FPC lens fixing
- ✓Camera filter attachment
- ✓Camera lens fixing during module repair
- ✓iPad camera repair
- ✓Tablet camera repair
- ✓Filter-stage work that pairs with the C89 and C90-UV glues in the same range
Compatible Devices
- ✓Verified scope is camera-module type, not specific phone models
- ✓Mobile phone camera modules
- ✓iPad camera modules
- ✓Tablet camera modules
- ✓CMOS filter assemblies inside camera modules
- ✓Face ID FPC lens assemblies
- ✓Camera filter attachments
- ✓Camera lens fixing positions



