YCS Inductance Coil Tester for Mobile PCB Repair
₨ 800
YCS Inductance Coil Tester for Mobile Boards
The YCS Inductance Coil Tester gives technicians a fast electromagnetic induction check for coils and inductors on mobile phone motherboards. Touch the probe tip to a coil, read the green LED, and decide whether that component needs a hot air station or a replacement. The compact 75 mm x 29 mm body fits a crowded repair bench, and the tool tests coils in circuit, so you skip lifting parts just to confirm a fault. Mechanicpk supplies the YCS Inductance Coil Tester for workshops that run charging, dead phone, and power-section diagnostics every day.
In stock
YCS Inductance Coil Tester: Electromagnetic Coil Fault Check for Mobile PCBs
The YCS inductance coil tester handles one job on the repair bench: it confirms whether a coil or inductor on a mobile motherboard still works. It relies on electromagnetic induction, so you touch the probe tip to the component and read the result from the LED instead of chasing pads with a multimeter. Technicians who handle dead phone, charging issue, and boot loop issue jobs gain a fast screening step before they commit to IC change karna or a full reflow. Whether your bench sees Android handsets, iPhone boards, or the occasional laptop motherboard, the tester gives you the same quick verdict. Mechanicpk supplies this tester for workshops that want clear component-level answers from a compact tool that sits next to the soldering station.
How Electromagnetic Induction Testing Works on a Phone Board
Coils and inductors in the power section handle charging, boost, and buck conversion on a phone PCB. When one opens or shorts, the board shows symptoms such as a dead phone, a charging issue, or a hang on logo. The YCS tester applies an inductive test to the coil and lights its green LED when the component behaves normally. A coil that fails to give that response deserves a closer look under the microscope. The tool signals coil condition through its LED rather than displaying a microhenry value, so you treat it as a screening instrument and add a multimeter reading when a number matters. Testing happens in circuit, which means you skip lifting the component just to learn whether it is good. Because each check takes seconds, you can sweep every coil in a suspect section and build a short list before you touch the hot air station. The slim body reaches coil rows packed beside shield cans, connectors, and flex sockets.
Using This Motherboard Coil Tester in a Charging and Dead Phone Workflow
Start with the symptom. On a charging issue, scan the coils around the charging IC and the main power section before you order a replacement IC. On a dead phone, check the power-path coils early, because a faulty coil can send you toward the wrong component and cost you an afternoon of rework. Once the LED flags a bad coil, mark its position, remove it with your hot air station, and fit the new part with a temperature-controlled soldering station while a PCB holder keeps the board steady. After the repair, run the tester over the new coil to confirm the part before you power the board on a test box or bench supply. Keep a short log of which coils failed on which models, and your team builds a repair reference that speeds up repeat faults. The same routine works on tablet and laptop boards, and it helps you clear coils off your suspect list before you move on to ISP work or reballing.
Why Technicians Add the YCS Inductance Coil Tester to the Bench
The 75 mm x 29 mm body stays small enough to sit beside your tweezers, multimeter, and microscope without eating bench space. A single green LED removes interpretation, so a new technician reads the same signal as a senior one. Repair shops that process many hardware fault jobs a day use a screening tool like this to separate coil faults from IC faults early in the diagnosis. Trainers can demonstrate coil fault finding in one short session because the operation stays simple. Buyers who compare it with a full LCR meter should weigh the trade: the YCS tester skips numeric readouts but costs far less and answers the pass-or-fail question quickly. Pair it with multimeters for resistance checks, hot air stations and reballing kits for the repair stage, and PCB holders for steady positioning, and you build a clean diagnose-then-repair sequence. Mechanicpk lists those related tools in the same catalog, so you can complete the bench in one order.
| Weight | 0.9 kg |
|---|
Key Features
- ✓Electromagnetic induction testing for coils and inductors
- ✓Green LED indicator for normal coil condition
- ✓In-circuit testing without removing the component
- ✓Instant fault lock and localization technology
- ✓Compact 75 mm x 29 mm body
- ✓Probe tip built for reaching small coils on dense boards
- ✓Suits mobile, tablet, and laptop board diagnostics
- ✓Simple operation for senior technicians and trainees alike
Specifications
| Brand | YCS |
|---|---|
| Model | Y-001 |
| Category | Inductance Coil Tester / Mobile Repair Tool |
| Compatibility | Smartphone, tablet, and laptop motherboards; general SMD coil circuits |
| Supported Devices | Android phones, iPhones, tablets, laptop motherboards |
| Technology | Electromagnetic induction |
| Dimensions | 75 mm x 29 mm |
Common Repair Uses
- ✓Screening power-path coils on a dead phone
- ✓Checking coils around the charging section during a charging issue
- ✓Detecting open-circuit coils
- ✓Detecting shorted coils
- ✓Scanning coils in circuit without lifting the component
- ✓Verifying a replacement coil after soldering
- ✓Checking coils on laptop motherboards
- ✓Clearing coils off the suspect list before an IC change
Compatible Devices
- ✓Universal, not tied to one brand or chipset family; it tests coils on the following board types
- ✓Android smartphone motherboards
- ✓iPhone motherboards
- ✓Tablet circuit boards
- ✓Laptop motherboards
- ✓Other BGA-based electronic boards
- ✓SMD inductor and coil positions on mobile PCBs
- ✓Power-section coils on phone boards
- ✓Brand-independent, with no chipset restriction
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the YCS inductance coil tester show the inductance value in microhenry?
Can I test a coil without removing it from the motherboard?
Related products
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



