2UUL BS148 Black Skull Solder Paste 148℃ 50g
₨ 1,600
Low Temperature Solder Paste for Mobile Repair
The 2UUL BS148 Black Skull Solder Paste 148℃ 50g is a low temperature solder paste for mobile repair work that melts at 148℃. The lower melting point protects the PCB and surrounding components during reflow, and distributor documentation recommends 148℃ paste for middle layer reballing. Each 50g pack from the 2UUL Black Skull line gives your bench enough paste for repeated BGA and SMD rework on smartphone logic boards. Mechanicpk offers it to Pakistani repair shops, service centers and technicians who want a predictable, low-heat paste beside their hot air station and reballing kit.
In stock
Low Temperature Solder Paste for Mobile Repair Benches
The 2UUL BS148 Black Skull Solder Paste 148℃ 50g gives your bench a low temperature solder paste for mobile repair that melts at 148℃. Standard medium-temperature pastes reflow at 183℃, so BS148 asks less heat from your hot air station and puts less thermal stress on the PCB, the BGA package and the components around it. On a dense smartphone board, that margin separates a clean reball from a lifted pad and a dead phone. 2UUL sells it under the Black Skull line as model BS148, packed at 50g for technicians who reball and rework logic boards every day.
Why 148℃ Matters on a Multilayer Mobile Board
Solder paste combines fine solder particles with flux, and the melting point of those particles sets the minimum temperature your joint needs. At 148℃, BS148 sits well under the 183℃ point of medium-temperature pastes, so you can run your hot air station at lower settings on heat-sensitive jobs. 2UUL also sells a BS183 version at 183℃, which gives you a clear choice by job. Pick BS148 when the board, the IC or the neighbouring parts need gentle heat. Pick the 183℃ paste when the repair calls for medium-temperature work. Distributor documentation recommends 148℃ paste for middle layer reballing, a job where heat control decides the result.
Where BS148 Fits in Your Reballing Workflow
Start by cleaning the pads and the BGA package, then lay a stencil over the IC and press the paste through the apertures with a steady stroke. Reflow with your hot air station, inspect the result under a microscope, and test continuity with a multimeter before you close the board. BS148 slots into that flow wherever you reball a BGA IC such as a CPU, PMIC or charging IC, or rework a stacked middle layer board. When you reball an eMMC or UFS chip before you reconnect it to your eMMC programmer or ISP pinout setup, a low-temperature paste also limits the chip’s heat exposure. A stable PCB holder keeps the board still while the paste flows, and a reballing kit with the correct stencil keeps ball size consistent from one job to the next.
Buying 2UUL BS148 for a Pakistani Repair Workshop
Repair shops in Pakistan use solder paste constantly, and a 50g pack covers many reballing sessions before you reorder. Mechanicpk supplies the 2UUL BS148 as a workshop consumable beside soldering stations, hot air stations, microscopes and reballing kits, so you can build a complete rework setup from one catalogue. Choose BS148 if your bench handles heat-sensitive boards often, and add a 183℃ paste if you also run medium-temperature rework. Keep the pack sealed between jobs, and set your hot air station for the paste you actually use instead of copying settings from a different one.
| Weight | 0.50 kg |
|---|
Key Features
- ✓148℃ melting point for low-heat reflow on heat-sensitive boards
- ✓Part of the 2UUL Black Skull solder paste line, model BS148
- ✓Recommended by distributors for middle layer reballing
- ✓50g pack covers repeated reballing and rework sessions
- ✓Suits BGA IC and SMD rework on mobile logic boards
- ✓Reduces thermal stress on the PCB and neighbouring components compared with 183℃ paste
- ✓Sits alongside the 183℃ BS183 in the same line, so you pick the paste by job
- ✓Works with standard hot air stations, stencils, reballing kits and PCB holders
Specifications
| Brand Entity | 2UUL |
|---|---|
| Product Entity | 2UUL BS148 Black Skull Solder Paste |
| Technology Entity | Low-temperature solder paste (148℃ melting point) |
| Compatible Device Entities | Smartphone logic boards, BGA ICs, stacked (middle layer) boards |
| Repair Process Entity | BGA stencil reballing, middle layer reballing, SMD rework |
| Industry Entity | Mobile phone repair, PCB repair, board-level rework |
Common Repair Uses
- ✓BGA stencil reballing
- ✓Middle layer board reballing
- ✓CPU and PMIC reballing after IC removal
- ✓Charging IC replacement after a charging issue
- ✓eMMC or UFS reballing before reconnecting to a programmer
- ✓SMD component refit on mobile PCBs
- ✓Dead phone board rework after a hardware fault
- ✓Low-heat rework next to heat-sensitive components
Compatible Devices
- ✓Universal repair consumable. It is not tied to specific phone models, and it suits any board where low-temperature BGA or SMD rework is appropriate.
- ✓Smartphone logic boards
- ✓Tablet motherboards
- ✓BGA ICs (CPU, PMIC, charging IC)
- ✓eMMC and UFS memory chips during reballing
- ✓Stacked middle layer boards
- ✓SMD components on mobile PCBs
- ✓Heat-sensitive boards that need low-temperature reflow
- ✓Any board reworked with a hot air station and stencil
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What is the melting point of 2UUL BS148 solder paste, and how does it differ from BS183?
Is 2UUL BS148 suitable for middle layer reballing?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



