2UUL SD87 POP Screwdriver 4IP Bit for iPhone 17
₨ 1,500
4IP Screwdriver for iPhone 17 Repair
The 2UUL SD87 POP Screwdriver gives your iPhone 17 repair bench a purpose-built 4IP screwdriver for the bottom screws on the iPhone 17, iPhone Air, iPhone 17 Pro, and iPhone 17 Pro Max. The interchangeable bits swap between Torx T5 and 4IP enhanced Torx, magnetic bit retention keeps the tip seated, and the lollipop-shaped handle holds comfortably through long teardown sessions. At 23.3 g net weight, it stays light on the bench and fits any technician’s toolkit without bulk. Mechanicpk supplies it to repair shops and service centers that handle the iPhone 17 generation.
In stock
Precision 4IP Screwdriver for iPhone 17 Repair
The iPhone 17 series bottom screws call for a 4IP enhanced Torx bit, and the 2UUL SD87 POP Screwdriver targets exactly that fastener. You load the 4IP bit for the iPhone 17, iPhone Air, iPhone 17 Pro, and iPhone 17 Pro Max, and you swap to a Torx T5 bit when the job demands it. Mechanicpk supplies the SD87 to Pakistani technicians and repair businesses that want a dedicated driver for the newest iPhone generation instead of stretching an older multi-bit handle across a screw profile it was never built for.
Bit System and Technical Highlights
The SD87 centers on a replaceable-tip design. The 4IP enhanced Torx bit, also called Torx Plus 4IP, matches the internal screw system of the iPhone 17 series, so the tip seats fully in the screw head and transfers torque without chewing the recess. Interchangeable bits mean the same handle serves Torx T5 and 4IP work, and a worn tip needs a bit swap rather than a whole new driver. Magnetic bit retention pulls the bit into place automatically, which cuts the fiddling when you change tips mid-job and keeps the bit from slipping during assembly and disassembly. The result is a tool that does one iPhone 17 task precisely instead of many tasks loosely.
Handle Design and Bench Handling
2UUL shapes the handle like a lollipop, so your palm sits on the rounded cap while your fingers control the shaft. That grip reduces hand fatigue across a full day of teardowns, which matters when you open and close devices back to back. The net weight of 23.3 g keeps the driver light enough to leave in your hand while you switch between a spudger, tweezers, and a heat source. The package measures 180 x 40 x 20 mm and ships at 37.5 g gross, so it slides into a tool roll, a drawer, or a pocket without taking space from the rest of your kit.
Where the SD87 Fits in Your Repair Workflow
Every iPhone 17 internal repair starts with the same step: you open the device. Whether you chase a charging issue, a display problem, a battery fault, or a deeper hardware fault on a dead phone, the bottom screws come out first and go back in last. The SD87 handles both ends of that sequence. From there, the job moves to the rest of your bench. You steady the board in PCB holders, inspect traces under a microscope, work joints with a soldering station or hot air station, and verify rails with a multimeter. If the repair ends in a BGA chip swap, a reballing kit takes over once the board is exposed. A clean, undamaged screw head at the start protects the whole sequence, because a rounded 4IP recess slows every later step and risks the housing.
Technicians who run volume benefit most. A dedicated 4IP screwdriver for iPhone 17 jobs lets you assign one driver to the front of the workflow and keep your general-purpose handles free for other models. Shop owners who train juniors get a clear rule for the bench: the SD87 opens the iPhone 17 family, and everyone knows which tool to reach for.
| Weight | 0.15 kg |
|---|
Key Features
- ✓Built for the iPhone 17 series, with a 4IP enhanced Torx bit matched to the bottom screws
- ✓Interchangeable bit design that swaps between Torx T5 and 4IP enhanced Torx bits
- ✓Replaceable tip, so a worn bit does not retire the whole handle
- ✓Magnetic function that seats the bit automatically and limits slippage
- ✓Lollipop-shaped ergonomic handle for comfortable extended use
- ✓Lightweight 23.3 g net weight
- ✓Compact 180 x 40 x 20 mm package for easy storage and carry
- ✓Dedicated tool for disassembly and assembly of iPhone 17 bottom screws
Specifications
| Brand Entity | 2UUL |
|---|---|
| Product Entity | 2UUL SD87 POP Screwdriver |
| Technology Entity | 4IP enhanced Torx (Torx Plus) interchangeable magnetic bit system |
| Compatible Device Entities | iPhone 17, iPhone Air, iPhone 17 Pro, iPhone 17 Pro Max |
| Repair Process Entity | iPhone teardown, bottom screw removal, and reassembly |
| Industry Entity | Mobile phone repair and precision hand tools |
Common Repair Uses
- ✓iPhone 17 series teardown and reassembly
- ✓Removing the bottom screws during iPhone 17 disassembly
- ✓Refitting the bottom screws during iPhone 17 assembly
- ✓Opening an iPhone Air for internal repair
- ✓Opening an iPhone 17 Pro or 17 Pro Max for display, battery, or charging port work
- ✓Opening the device for board-level inspection before microscope and soldering work
- ✓Swapping to a Torx T5 bit for jobs that need it
Compatible Devices
- ✓Bottom screws on the iPhone 17 series
- ✓iPhone 17
- ✓iPhone Air
- ✓iPhone 17 Pro
- ✓iPhone 17 Pro Max
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which iPhone 17 screws does the SD87 4IP bit remove?
Can I use other bits with the 2UUL SD87 POP Screwdriver?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



