2UUL SD90 Stripped Screw Extractor Drill Set

₨ 1,400

2UUL SD90 Screw Extractor for Stripped Phone Screws

The 2UUL SD90 Stripped Screw Extractor Drill Set gives repair technicians a controlled way to remove rounded, rusted, and stripped screws from phone PCB motherboards and device housings. The tungsten steel bits use a sliding-tooth drill design that targets a damaged screw head directly, so you recover the fastener instead of forcing the driver. The set works with an electric drill, manual hand tools, and repair stations, and the compact 54×32.5×20mm pack fits any bench kit. Mechanicpk supplies the 2UUL SD90 across Pakistan for workshops, service centers, and technicians who need a dependable stripped screw solution.

In stock

12 People watching this product now!
Description

2UUL SD90 Screw Extractor Drill Set for Stripped Phone Screws

The 2UUL SD90 Stripped Screw Extractor Drill Set targets one of the most common bench problems in mobile repair: a screw head that has rounded off, rusted in place, or chewed up under a driver. This 2UUL SD90 screw extractor drill set gives you a direct way to deal with that fastener on phone motherboards, frames, and housings before a simple teardown turns into a damaged board. The set contains two tungsten steel bits that cut into the damaged head so you can back the screw out. If your workshop opens phones every day, this set belongs next to your precision screwdrivers and opening tools.

Bit Material and Sliding-Tooth Design

Distributor listings describe the SD90 as an alloy sliding drill bit set, and the bits use tungsten steel, also sold as carbide. Tungsten steel carries high hardness, which suits cutting into the small steel screws that phone makers fit on mainboards and mid-frames. The sliding-tooth geometry targets a worn head directly, so the bit bites instead of slipping across the surface. The set ships with two bits, which gives you a spare when one edge dulls.

Each bit fits an electric drill, a manual hand tool, or a repair station, so you choose the control level the job demands. A manual handle gives you the finest torque feel on delicate boards, while a drill speeds up work on housing screws that survive hand pressure.

Where It Fits in Your Teardown Workflow

Place the SD90 at the disassembly stage, before any soldering, reballing, or IC work starts. A stripped screw on a motherboard blocks board removal, so every hardware fault job stalls until you clear it. Clamp the phone in your PCB holder, bring the work under your microscope, and set the bit square onto the damaged head. Run low speed with light pressure, let the bit bite, then back the screw out.

Technicians working a charging issue, a display problem, or a dead phone after a drop meet the same blocker at the start of the job. Once the screw clears, your workflow continues with the hot air station, soldering station, or test box that the repair needs. If the fault points to storage, the board moves on to ISP pinout tools, eMMC programmers, or UFS adapters for data and flash work.

Treat the bits as consumables on hard screws and keep your technique consistent. Hold the bit aligned with the screw axis, keep the speed low, and stop as soon as the head starts to turn. Rusted screws and screws that earlier technicians over-tightened respond best to steady pressure rather than force. Clean the metal debris off the board before you move to the next step, since loose swarf near ICs and connectors creates a new hardware fault.

Why Repair Shops Stock the SD90

A stripped screw costs you time on every job it touches, and shops that open dozens of phones a day meet them weekly. The SD90 pack measures 54 by 32.5 by 20 millimeters and weighs about 21 grams with packaging, so it fits a drawer, a tool roll, or a technician’s shirt pocket.

The same bits cover mobile phones, tablets, laptops, watches, and other small electronics, which means one purchase serves several repair lines. Mechanicpk stocks the 2UUL SD90 for Pakistani workshops that want a dependable stripped screw remover next to their reballing kits, multimeters, and microscopes. Pair it with a precision screwdriver set and your screen separation tools, and you cover the full opening stage of a repair without improvising.

Service centers and training institutes gain the most from it, because a shared bench sees every kind of damaged fastener sooner or later. A stripped screw that once forced a technician to scrap a frame or bin a board now becomes a routine step. You keep more customer phones repairable, you shorten the time between intake and the first real diagnostic step, and you stop spending bench hours on a fastener that costs a fraction of the repair.

Additional information
Weight0.21 kg
Q & A
Please login to post questions

Key Features

  • Two tungsten steel (carbide) bits per set
  • Alloy sliding-tooth drill bit design for worn screw heads
  • Built for stripped, rusted, and damaged screw removal
  • Works with electric drills, manual hand tools, and repair stations
  • Covers phones, tablets, laptops, watches, and small electronics
  • Compact 54 x 32.5 x 20 mm package, about 21 g
  • Suits phone PCB motherboard and housing screws
  • Fits mobile repair shop, service center, and training bench kits

Specifications

Brand2UUL
ModelSD90
CategoryScrewdrivers (Mobile Phone Repair Tools)
CompatibilityUniversal — not model-specific; electric drill, manual hand tools, repair stations
Supported DevicesMobile phones, tablets, laptops, watches, small electronics, precision devices
TechnologyAlloy sliding-tooth drill bit design
MaterialTungsten steel (carbide)
Package Contents2 x screw extractor drill bits
Dimensions54 x 32.5 x 20 mm (package)
Weight21 g (gross)

Common Repair Uses

  • Stripped-screw removal during teardown and board-level repair
  • Removing stripped screws from phone PCB motherboards
  • Removing damaged bottom screws on phone housings
  • Extracting rusted screws
  • Recovering rounded screw heads before board removal
  • Opening phones for charging issue and display problem repairs
  • Opening dead phones before IC or hardware fault diagnosis
  • Disassembling tablets, laptops, and watches with damaged fasteners
  • General electronics maintenance on small precision devices

Compatible Devices

  • Universal screw-extraction scope, not tied to specific phone models
  • Mobile phones
  • Phone PCB motherboards
  • Phone housings and frames
  • Tablets
  • Laptops
  • Watches
  • Small electronics and precision devices
  • Electric drills, manual hand tools, and repair stations (driving tools)

FAQ

What is the product name?
The product name is 2UUL SD90 Stripped Screw Extractor Drill Set.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is SD90.
What is this product used for?
This product removes stripped, rusted, and damaged screws during mobile phone teardown and board-level repair.
Which devices are compatible with this product?
This product works on mobile phones, tablets, laptops, watches, and other small electronics. It is universal and not tied to specific phone models.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can the 2UUL SD90 remove stripped screws from a phone motherboard?
Yes. The SD90 targets stripped and damaged screws on phone PCB motherboards and housings. Use low speed and light pressure to protect the board.
Does the 2UUL SD90 work with an electric drill or only by hand?
It works with an electric drill, manual hand tools, and repair stations. The set contains 2 tungsten steel (carbide) bits.