2UUL DA61 Hand Finish SEXY 2 Blades Set for PCB Underfill
₨ 1,800
Hand-Finished Blades for CPU and NAND Underfill Work
The 2UUL DA61 Hand Finish SEXY 2 Blades Set gives your repair bench four hand-polished blades, S II, E II, X II, and Y II, plus a carbon fiber handle with a twist-to-unlock quick-change mechanism. Each blade targets a separate step in board-level work: separating CPU and NAND flash, prying SDRAM and flash chips, cleaning side glue, and cutting black underfill on a dead phone motherboard. Technicians who clean solder pads before reballing or chip replacement get a controlled edge designed to lift adhesive without gouging the PCB. The set suits iPhone and Android boards in any mobile repair workshop.
In stock
2UUL DA61 SEXY Blade Set for Underfill and Chip Glue Control
The 2UUL DA61 Hand Finish SEXY 2 Blades Set covers the glue-removal stage of board-level repair, where you separate a CPU or NAND flash package from a motherboard or clear cured adhesive from the pads underneath. This 2UUL DA61 SEXY blade set arrives as four blades, S II, E II, X II, and Y II, plus a 2UUL DA29 Vajra carbon fiber handle. Each blade profile carries its own job, so you match the edge to the task instead of forcing one scraper through every step. Craftsmen hand-polish each blade for a sharp, durable finish, and the twist-to-unlock handle lets you swap profiles mid-job without reaching for a second tool.
S II, E II, X II, Y II: Underfill Removal Blade Set Breakdown
The S II blade separates a CPU from NAND flash when the two packages sit tight against each other on the board. The E II blade pries off CPU, SDRAM, and flash chips once hot air softens the bond. The X II blade works as the side glue removal tool, clearing the perimeter of a package so the pry step meets less resistance. The Y II blade cuts black underfill beneath the chip without hurting the motherboard, which makes it your first pick on stubborn cured epoxy. Matching the blade to the glue type matters in any underfill removal blade set. Thin side glue responds to X II, while thick black underfill under a CPU needs the Y II profile, and a blade that fights the epoxy slips and scratches solder mask. 2UUL designs the set to remove residual adhesive while protecting the board, so you can work close to pads and neighboring components. You still control pressure and angle. Fix the board in a PCB holder, work under a microscope, and cut or lift the glue instead of forcing the chip.
Where It Fits in Dead Phone and Hardware Fault Repair
Most jobs that reach this tool start as a dead phone, a boot loop issue, or a charging issue that traces back to a hardware fault under a CPU or NAND package. Your sequence stays consistent: preheat the board, lift the package with hot air, free it with the S II or E II blade, clean the edges with X II, and cut leftover underfill with Y II. Then clean the pads before you reball or fit a replacement IC. Hot Air Stations and Soldering Stations handle the thermal side of that sequence, while Reballing Kits take over once the pads are clean. A Multimeter confirms pad continuity before you reflow, and a quick pass under a Microscope catches lifted pads early. The same workflow serves eMMC and UFS chip-off jobs on Android boards, where clean pads decide whether the new chip seats correctly. Use the set on iPhone and Android logic boards alike; the tool is universal and does not tie to a phone model. Repair shops running daily chip-level volume benefit most, because repeatable glue removal shortens the time between a failed board and a testable one.
Handle Build and Bench Integration
The 2UUL DA29 Vajra handle uses carbon fiber, which keeps the set light and comfortable through long sessions of fine cutting. The twist-to-unlock mechanism swaps blades fast, so your S II to Y II changes take seconds instead of a tool hunt. The listed net weight is 5.4 g, and the retail pack measures 195 x 105 x 13 mm, small enough for a bench drawer. Wipe flux residue off the edges after each job and store the blades in their pack. After glue removal, the board moves on to the next stage of your workflow. ISP Pinout Tools, eMMC Programmers, UFS Adapters, and Test Boxes cover the reading, programming, and flashing steps when a phone shows dead after flash or hang on logo. Add this set to your bench as the glue-removal base of your kit, then step up to dedicated rework stations as your volume grows.
| Weight | 0.15 kg |
|---|
Key Features
- ✓Four blade profiles in one set: S II, E II, X II, and Y II
- ✓2UUL DA29 Vajra carbon fiber handle, light and comfortable to grip
- ✓Twist-to-unlock design for fast blade changes
- ✓Hand-polished blade edges for a sharp, durable finish
- ✓S II blade separates the CPU and NAND flash
- ✓E II blade pries off CPU, SDRAM, and flash chips
- ✓X II blade removes side glue around chip edges
- ✓Y II blade cuts underfill black glue without hurting the motherboard
Specifications
| Brand Entity | 2UUL |
|---|---|
| Product Entity | 2UUL DA61 Hand Finish SEXY 2 Blades Set (Sexy Blade II, 4-in-1 blade set) |
| Technology Entity | Hand-polished blades, 2UUL DA29 Vajra carbon fiber handle, twist-to-unlock quick-change system |
| Compatible Device Entities | iPhone logic boards, Android smartphone motherboards, CPU, NAND flash, SDRAM and flash chips |
| Repair Process Entity | PCB underfill removal, chip glue removal, BGA chip separation, solder pad cleaning |
| Industry Entity | Mobile phone repair, board-level (PCB) repair |
Common Repair Uses
- ✓Glue removal and chip separation steps in board-level mobile repair.
- ✓Separating CPU and NAND flash (S II)
- ✓Prying CPU, SDRAM, and flash chips (E II)
- ✓Removing side glue around chip edges (X II)
- ✓Cutting black underfill glue under CPU packages (Y II)
- ✓Cleaning PCB underfill before IC replacement
- ✓Cleaning solder pad adhesive before reballing
- ✓Scraping leftover chip glue after hot air removal
- ✓Prying CPU covers during board-level disassembly
Compatible Devices
- ✓Universal hand tool, not device-specific; works on mobile phone PCBs where CPU, NAND flash, and SDRAM packages carry glue or underfill.
- ✓Universal use, no phone-model restriction
- ✓iPhone logic boards
- ✓Android smartphone motherboards
- ✓CPU packages with black underfill
- ✓NAND flash chips
- ✓SDRAM and flash chips
- ✓BGA chip edge glue
- ✓Solder pads with residual adhesive



