2UUL SA13 Screen Sealing Adhesive for iP13 (5pcs/Pack)

₨ 900

iPhone 13 Frame Seal, 5-Piece Pack

The 2UUL SA13 is an iPhone 13 screen sealing adhesive that gives your bench a pre-cut, double-sided frame seal for display reassembly. Each pack holds five pieces, so one purchase covers five screen jobs. You lay the adhesive on a cleaned frame, seat the display, and apply heat and pressure with a compatible hot press to restore the sealed fit around the bezel. Mechanicpk supplies the SA13 to Pakistani repair shops and service centers that handle iPhone 13 screen replacements, battery swaps, and Face ID repairs every week.

In stock

17 People watching this product now!
Description

2UUL SA13 iPhone 13 Screen Sealing Adhesive for Controlled Display Reassembly

Every iPhone 13 that leaves your bench after a display job needs a proper seal between the screen and the frame. The 2UUL SA13 is an iPhone 13 screen sealing adhesive that gives you a pre-cut, double-sided frame seal for exactly that step. 2UUL cuts it to the iPhone 13 frame outline, so you skip measuring, trimming, and the guesswork that comes with generic tape. Mechanicpk supplies the SA13 in a five-piece pack to repair shops and service centers across Pakistan that run iPhone 13 screen jobs as daily work.

Technical Profile of the SA13

The SA13 is a pre-cut, double-sided adhesive sized for the iPhone 13 screen frame. 2UUL sells it as a sealing adhesive, not a general-purpose tape, and its instructions describe a heat-and-pressure application. You clean and inspect the frame for deformation, lay the adhesive on the frame, then press the display down with heat using a 2UUL DA07 Mini Hot Press Station or another heating pressure press. 2UUL describes this process as restoring the phone’s IP67 airtightness. Final sealing performance still depends on frame condition, installation quality, and the pressure you apply, so treat the adhesive as one controlled step in the reassembly rather than a standalone guarantee. The pieces arrive pre-cut, which gives you identical placement on every job and no blade work near the display edge.

Where It Fits in the iPhone 13 Repair Workflow

The seal goes on last. You open the phone, lift the old display, clear the old adhesive from the frame, straighten any bend, and test the new display before you commit to sealing. Then you place the SA13 and press. A microscope helps you inspect the frame edges for leftover residue and small deformations, and a PCB holder keeps the frame steady while you clean it. After the press, a quick multimeter check on the charging and battery lines gives you a final confirmation that the job left nothing disturbed. Skip the seal and you send out a phone that looks finished but lets dust in around the bezel. That turns into a display problem or a touch complaint a week later, and the customer walks back to your counter.

Repair Jobs That Use This Adhesive

Any iPhone 13 job that opens the display breaks the original seal. Screen replacement is the obvious case. Battery replacement, charging issue repairs that need the display lifted to reach the charging port flex, and Face ID component work all start with display removal, so each one ends with a fresh seal. Reseal on every reopening: once you lift the screen again, the seal from the previous job no longer holds, so use a new piece each time. Five pieces per pack covers five of these jobs, which suits a busy counter and keeps a spare ready for the day a phone returns for a second opening.

Buying iPhone Screen Sealing Adhesive in Pakistan

Match the part number to the model before you order. The SA13 fits the iPhone 13. The other 13-series models use their own 2UUL numbers: SA13M for the Mini, SA13P for the Pro, and SA13PM for the Pro Max. Pair the adhesive with a compatible heat press. 2UUL also lists its DA63 sealant thermal press plate for the iPhone 13 series. Keep tweezers on the bench so you place each piece on the frame without stretching it. Buy several packs if your shop handles iPhone 13 volume every week, because the adhesive costs far less than a comeback for an unsealed screen. You can browse the Hot Air Stations, Microscopes, and PCB Holders categories to build out the rest of your iPhone display bench.

Additional information
Weight0.100 kg
Q & A
Please login to post questions

Key Features

  • Pre-cut to the iPhone 13 screen frame outline
  • Double-sided adhesive for display-to-frame sealing
  • Five pieces per pack for five screen jobs
  • Heat-and-pressure application for a sealed fit
  • Works with the 2UUL DA07 Mini Hot Press Station or another heating pressure press
  • Compatible with the 2UUL DA63 sealant thermal press plate lineup for the iPhone 13 series
  • Model-specific part number (SA13) for easy stock matching
  • Made for professional screen replacement and reassembly

Specifications

Brand2UUL
ModelSA13
CategoryScreen Sealing Adhesive
CompatibilityiPhone 13
Supported DevicesiPhone 13
TechnologyPre-cut double-sided adhesive, heat-press application

Common Repair Uses

  • Resealing the iPhone 13 display to the frame after any repair that opens the screen
  • iPhone 13 screen replacement
  • iPhone 13 battery replacement
  • Charging port repair that needs display removal
  • Face ID component repair
  • Frame resealing after cleaning old adhesive residue
  • Display reassembly with a hot press or thermal press plate

Compatible Devices

  • iPhone 13 only (model-specific part, not universal)
  • iPhone 13
  • Other 13-series models need their own 2UUL part numbers: SA13M (Mini), SA13P (Pro), SA13PM (Pro Max)

FAQ

What is the product name?
The product name is 2UUL SA13 Screen Sealing Adhesive for iP13 (5pcs/Pack).
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is SA13.
What is this product used for?
This product is used for sealing the iPhone 13 display to the frame after screen replacement or any repair that opens the display.
Which devices are compatible with this product?
This product is compatible with the iPhone 13.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the 2UUL SA13 need a hot press to install?
Yes. 2UUL’s instructions call for heat pressing with the 2UUL DA07 Mini Hot Press Station or another heating pressure press to seat the display and seal the frame.
Can I use the SA13 on iPhone 13 Mini, Pro, or Pro Max?
No. The SA13 fits the iPhone 13 only. The 13 Mini uses SA13M, the 13 Pro uses SA13P, and the 13 Pro Max uses SA13PM.