YCS-DB02 Multi-Function Spudger 9in1 Set
₨ 2,600
Multi-Function Spudger for Board-Level Glue Removal
The YCS-DB02 Multi-Function Spudger 9in1 Set gives you three lightweight 9G handles, six interchangeable blades and a metal storage case in one compact kit. YCS built this multi-function spudger for removing glue around CPU, NAND flash and IC chips, and for opening phone motherboards without improvising with a cutter or a screwdriver. The textured non-slip handles keep the blade steady through a long shift, and the differently shaped blades let you switch between scraping, lifting and separating in seconds. Mechanicpk supplies this set to Pakistani repair shops, service centers and training institutes.
In stock
YCS-DB02 Multi-Function Spudger Set for CPU, NAND and IC Glue Work
Glue around a CPU, NAND flash or IC chip decides how clean your rework turns out. The YCS-DB02 multi-function spudger set puts six blades and three handles on your bench, so you match the blade to the joint instead of forcing one tool into every job. YCS designed the kit for board-level work on mobile phones, tablets and other electronic circuits, and the compact metal case keeps every blade in one place when you move between workstations.
Inside the 9in1 Configuration
The “9in1” name counts the parts: three 9G handles and six blades. Each handle carries a textured, non-slip grip, so your fingers hold position even when you press into stubborn adhesive. The six blades come in different shapes, including flat and curved profiles, which lets you scrape a flat glue layer with one blade and lift a chip edge with another. The product measures 140 x 8 mm, and the packaging measures 60 x 175 x 20 mm, so the set slips into a bench drawer or a technician’s kit bag without taking space from your soldering gear. The metal case protects the blades from bending against other tools, which matters when a thin blade is the only thing standing between you and a scratched board.
Where It Fits in Your Board-Level Workflow
Most CPU and NAND jobs follow the same order. You fix the board in a PCB holder, bring it under a microscope, soften the glue with a hot air station, and then clear the adhesive around the chip. This is the step where the spudger set earns its place. Clean glue removal before you lift a chip gives your hot air station a clear path to the solder balls, and it keeps residue out of the pads you plan to reball later. After the chip comes off, you can use the same blades to clean the surrounding area before you move to your soldering station and reballing kit.
The set also helps in the earlier disassembly stage. Phone motherboards often sit under adhesive, shields and flex cables, and a thin blade separates them with more control than a screwdriver tip. You get the same benefit on tablets and other digital devices that use glued internal parts.
Why Technicians Keep a Dedicated Blade Set
A dead phone on your bench rarely arrives with a clean board. Many boards show glue around the CPU or storage chip after a previous repair attempt, and you must clear it before you can test the chip, change the IC or run a reflow. When you work on eMMC and UFS chips, clean edges also make your next steps easier, whether you read the chip through ISP pinout tools, an eMMC programmer or a UFS adapter. A dedicated set removes the temptation to reach for a blade that does not fit the job, and it protects the pads and neighbouring components you cannot afford to damage.
Repair shops in Pakistan handle a steady flow of boot loop issue, hang on logo and charging issue cases that end in IC change karna. A spudger set at your bench speeds up the preparation work on each of those boards. You spend less time hunting for a suitable scraper, and you repeat the same clean setup on every board.
Add a multimeter and a test box to the same bench, and you cover the full path from diagnosis to glue removal to chip work. The YCS-DB02 handles the glue and separation stage of that path, and it fits technicians who want a compact, organized set instead of loose blades. If your bench already runs a hot air station and microscope, this set completes the preparation side of your CPU, NAND and IC work, and it gives new technicians in your shop a safe, controlled way to learn glue removal before they move to advanced rework.
| Weight | 0.10 kg |
|---|
Key Features
- ✓9in1 kit with three 9G handles and six interchangeable blades
- ✓Differently shaped blades, including flat and curved profiles
- ✓Lightweight handles that reduce hand fatigue on long repair sessions
- ✓Textured non-slip handle grip
- ✓Built for CPU, NAND flash and IC chip glue removal
- ✓Suits motherboard disassembly on phones and tablets
- ✓Compact metal storage case keeps all parts together
- ✓Small footprint (140 x 8 mm product size) fits a bench drawer or kit bag
Specifications
| Brand | YCS |
|---|---|
| Model | YCS-DB02 |
| Category | Spudger / Pry Blade Set |
| Compatibility | Universal, not device-specific |
| Dimensions | 140 x 8 mm (packaging 60 x 175 x 20 mm) |
Common Repair Uses
- ✓Glue removal and disassembly work at board level
- ✓CPU glue removal before chip lifting
- ✓NAND flash glue removal before reading or replacing the chip
- ✓IC chip glue removal before IC change karna
- ✓Motherboard disassembly
- ✓Adhesive stripping from board surfaces
- ✓Pad-area cleaning before reballing
- ✓Tablet internal disassembly
- ✓General electronic circuit repair preparation
Compatible Devices
- ✓Universal hand-tool set, suited to the verified device scope below, not tied to specific phone models or chipsets
- ✓Mobile phone motherboards
- ✓Tablet motherboards
- ✓Electronic circuit boards
- ✓Other digital devices
- ✓Boards with glued CPU chips
- ✓Boards with glued NAND flash chips
- ✓Boards with glued IC chips
- ✓Boards that need adhesive stripping before rework
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
How many blades and handles come in the YCS-DB02 set?
Can the YCS-DB02 remove glue around CPU and NAND chips on a phone motherboard?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock



