YCS 2IN1 UV Curing Light Lamp With Cooling Fan

₨ 1

UV Curing Lamp With Cooling Fan

YCS 2IN1 UV Curing Light Lamp With Cooling Fan puts a 3W UV curing lamp and a heat-dissipation fan with smoke exhaust into one 104 g handheld body. You switch between curing and cooling with a single button, so one unit cures UV solder mask on a repaired trace and then pulls heat off the board after hot air rework. Front heat dissipation and rear air intake keep air moving across the work area, and the listed cooling time sits within 3 seconds. Mechanicpk supplies this UV curing lamp with cooling fan to mobile repair technicians and service centers across Pakistan who work on phone motherboards, CPU, IC, and PCB repairs.

Out of stock

16 People watching this product now!
Description

Compact UV Curing and Cooling Tool for Board-Level Repair

The YCS 2IN1 UV Curing Light Lamp With Cooling Fan combines two bench jobs that technicians normally handle with separate tools. You get a 3W UV curing lamp for resin and solder mask work, plus a fan that handles heat dissipation and smoke exhaust, in a body that measures 60 × 56 × 40 mm and weighs 104.2 g net. If you search for a UV curing lamp with cooling fan for mobile repair in Pakistan, this unit covers the full cycle on a phone motherboard: rework the joint, clear the smoke, cool the board, and cure the repair. It sits on a crowded bench next to your hot air station and microscope without taking over the space.

How the 2-in-1 Design Works on Your Bench

A single button switches the unit between curing mode and heat-dissipation mode, and LED indicator lights show which state it runs in. The front side handles heat dissipation while the rear side pulls air in, so you get a clear airflow path across the area you work on. The listed rapid cooling figure sits within 3 seconds, which cuts the wait after a hot air pass and lets you move straight to the next step. The lamp side uses high-quality heat dissipation LED beads, so the curing head stays practical for repeated short cycles. The 60 × 56 × 40 mm footprint matters when your bench already holds a hot air station, a microscope, and a PCB holder: you park the unit within reach and skip a separate UV box and a separate cooling fan. Because the lamp and the fan share one body, you reach for one tool instead of two, and your repair bench stays cleaner during a long day of dead phone and charging issue jobs.

Where It Fits in the Mobile Repair Workflow

Board-level repair follows a sequence. You diagnose with a multimeter, lift or replace the IC with a hot air station or soldering station, clean the pads, repair any damaged trace, and then protect the repair. This lamp covers the last stage and the cooling between stages. After an IC change karna job, you switch to the fan, pull heat and flux smoke off the board, and handle it sooner. When a charging port pad lifts and you rebuild it, you cure UV solder mask over the repaired trace without waiting on air drying. When you run a jumper wire (jumper lagana) across a broken trace, UV curing material holds the wire in position while you move on to the next pad. The same sequence applies on CPU and BGA work, where you want the board back to a handling temperature quickly before you reball or reflow the next chip.

Technical Notes Before You Buy

The verified numbers are straightforward: 3W power, 60 × 56 × 40 mm product size, and 104.2 g net weight. UV curing materials differ in cure time, so read the instructions on your solder mask or UV glue and test on a scrap pad before you cure on a customer board. Keep the lamp aimed at the repair area, and keep the fan intake clear so airflow stays consistent. The unit suits repair shop owners who want to reduce the number of single-purpose tools on the bench, and service centers that run several technicians on shared stations. Technicians who handle high volumes of board-level jobs benefit most, because the mode switch removes tool changes between rework, cooling, and curing, and it keeps every step within arm’s reach of the microscope.

Build out the rest of the workflow from the same catalog. Mechanicpk stocks Hot Air Stations, Soldering Stations, Microscopes, Reballing Kits, PCB Holders, and Multimeters for the repair stages around this lamp. For dead after flash jobs and storage-level work, you can pair your bench with ISP Pinout Tools, eMMC Programmers, UFS Adapters, and Test Boxes, then use this UV curing lamp with cooling fan to finish each board cleanly.

Additional information
Weight0.152 kg
Q & A
Please login to post questions

Key Features

  • 2-in-1 design with UV curing lamp and cooling fan in one body
  • One-button switching between curing and heat-dissipation modes
  • 3W UV curing output
  • Front heat dissipation with rear air intake
  • Rapid cooling listed within 3 seconds
  • Smoke exhaust for rework and soldering fumes
  • LED status lights show the active mode
  • Compact 60 × 56 × 40 mm body at 104.2 g net weight

Specifications

BrandYCS
CategoryUV Curing Lamps & Repair Accessories
CompatibilityUniversal — not device-specific
TechnologyUV LED curing with fan heat dissipation and smoke exhaust
Power Rating3W
Dimensions60 × 56 × 40 mm
Weight104.2 g (net)

Common Repair Uses

  • Real bench scenarios where a UV curing lamp and cooling fan work together.
  • Curing UV solder mask over repaired traces
  • Cooling a motherboard after hot air IC change
  • Extracting solder and flux smoke during rework
  • Securing jumper wires with UV curing material
  • Rebuilding lifted charging port pads
  • CPU and BGA chip repair cooling between reflow passes
  • Hardware fault repair on dead phone boards
  • Board handling and inspection after rework under a microscope

Compatible Devices

  • Universal — not device-specific. Works on any phone motherboard, CPU, IC, or PCB area that needs UV curing or board cooling.
  • Android smartphone motherboards
  • iPhone logic boards
  • Phone CPU and BGA chip areas
  • Power and charging IC zones
  • Charging port and dock solder pads
  • Phone sub-boards and flex connector pads
  • Repaired traces and jumper wire points
  • General electronic PCBs

FAQ

What is the product name?
The product name is YCS 2IN1 UV Curing Light Lamp With Cooling Fan.
What is the brand of this product?
The brand of this product is YCS.
What is the model of this product?
The model of this product is YCS 2IN1 UV Curing Light Lamp With Cooling Fan.
What is this product used for?
This product is used for UV curing and for cooling and smoke exhaust during mobile phone motherboard, CPU, IC, and PCB repair.
Which devices are compatible with this product?
This product is universal and not device-specific. It works on any phone motherboard, CPU, IC, or PCB area that needs UV curing or board cooling.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does this UV curing lamp also clear smoke and heat during rework?
Yes. The unit combines UV curing with heat dissipation and smoke exhaust, using front heat dissipation and rear air intake. The listed rapid cooling figure is within 3 seconds.
Can I switch between UV curing and cooling on this lamp?
Yes. One button switches between curing mode and heat-dissipation mode, and LED lights show the active mode.