YCS Diagonal 180 Pliers Cutter for Mobile Repair
₨ 350
180 mm Diagonal Cutter for Repair Benches
The YCS Diagonal 180 Pliers Cutter gives your repair bench a full-size 180 mm diagonal cutting plier with high-carbon steel cutting edges. Mechanicpk supplies it to Pakistani technicians who trim jumper wire, clip component leads after soldering, and cut copper, aluminium, and soft steel wire during board repair. Hardened jaws close with precise alignment for clean cuts, and non-slip, anti-fatigue handles keep your grip steady through long shifts. It works on any phone brand because it cuts wire and leads, not a specific chipset or model. Add it to your order with a soldering station and PCB holder.
In stock
YCS Diagonal 180 Pliers Cutter for Mobile Repair Benches
The YCS Diagonal 180 Pliers Cutter is a full-length 180 mm diagonal cutting plier for technicians who want a dependable side cutter beside the soldering station. Every board repair session leaves wire to trim: jumper wire on a dead phone, component leads after a rework, solder wire cut to length, and loose cable ends from a charging issue repair. This cutter handles that work with high-carbon steel cutting edges and hardened jaws, so you cut cleanly instead of crushing or bending the wire. Mechanicpk lists it for repair shops, service centers, and training institutes across Pakistan that want one consistent cutter on every bench.
Diagonal Head and 180 mm Handle Leverage
The cutting edges of a diagonal plier sit at an angle to the pivot, so you approach a lead from the side and trim close to the surface. The 180 mm (7 inch) overall length gives you longer handles than a pocket cutter, and longer handles mean more leverage on every squeeze. Distributor listings describe sharp edges with precise jaw alignment, so the two edges meet cleanly and slice the wire instead of chewing it. The cutting edges use high-carbon steel, and the jaws are hardened for repeated daily use. A non-slip, anti-fatigue handle coating, contoured to reduce strain on your hands and wrists, helps when you trim wire all day at the bench.
Cutting scope covers copper, aluminium, and soft steel wire. Distributors publish no maximum wire diameter, so keep this plier on soft wire and leave hardened steel, piano wire, and spring steel to a heavy-duty high-leverage cutter.
Where the YCS Diagonal 180 Pliers Cutter Fits in Your Repair Workflow
During ISP and test-point work on a dead phone, you cut jumper wire to length before you tin the ends and solder them down. After an IC, connector, or charging port replacement under a hot air station, you clip protruding leads so nothing shorts against the shield frame. When a hardware fault traces back to a damaged battery or charging wire, you trim the cable back to clean copper before you rejoin it. When you build a bench jig or wire hook from aluminium or soft steel wire, the same plier cuts it to size.
Technique matters as much as the tool. Point the flat side of the head toward the lead you keep, so the angled face falls on the offcut, and cover the lead with your finger or tweezers before you cut, because clipped ends fly across a bench and land inside open boards. Wipe the jaws after you cut solder wire, and store the plier closed so the edges stay aligned. Those habits protect your board and keep the cut quality consistent for months.
Pair it with the tools that complete the job. A soldering station and PCB holder secure the board while you work, a multimeter confirms continuity after you trim and solder, and a microscope lets you inspect each cut lead for stray strands. Browse the ISP pinout tools, soldering stations, multimeters, microscopes, and PCB holders categories on Mechanicpk to build the full bench around this cutter.
Choosing the Right Cutter for Your Bench
This plier is a universal hand tool. It has no chipset, firmware, or phone-model dependency, so it works the same on any phone brand and needs no compatibility check before you buy. Size is the decision point. At 180 mm, it suits general bench cutting rather than hair-thin ISP wires. If your workflow centers on ultra-fine jumper wire, add a precision flush cutter beside it. If you cut thicker or harder wire, step up to a high-leverage diagonal cutter. For everyday trimming of jumper wire, leads, solder wire, and soft cable, one YCS Diagonal 180 Pliers Cutter per technician keeps the job fast and the cut clean. Repair shops with several technicians can equip every bench with the same cutter, so everyone cuts the same way.
| Weight | 0.250 kg |
|---|
Key Features
- ✓180 mm (7 inch) diagonal cutting plier
- ✓High-carbon steel cutting edges
- ✓Hardened jaws for repeated daily use
- ✓Sharp edges with precise jaw alignment for clean cuts
- ✓Cuts copper, aluminium, and soft steel wire
- ✓Non-slip, anti-fatigue coated handles
- ✓Contoured grip that reduces hand and wrist strain
- ✓Universal tool with no device or chipset dependency
Specifications
| Brand | YCS |
|---|---|
| Model | Diagonal 180 |
| Category | Pliers / Diagonal Cutting Pliers (Mobile Repair Hand Tools) |
| Compatibility | Universal, not device-specific |
| Material | High-carbon steel cutting edges, hardened jaws, non-slip coated handles |
| Dimensions | Length 180 mm (7 inch) |
Common Repair Uses
- ✓Wire and lead cutting during board-level mobile repair
- ✓Trimming jumper wire to length for ISP and test-point connections on a dead phone
- ✓Clipping excess component leads after soldering or rework
- ✓Cutting copper wire during battery or charging wire repair
- ✓Cutting solder wire to length for rework
- ✓Trimming protruding leads after IC, connector, or charging port replacement
- ✓Cutting aluminium and soft steel wire for bench jigs and hooks
- ✓Clipping cable ties and tidying loose wire on the repair bench
- ✓General cable and wire trimming during hardware fault diagnosis
Compatible Devices
- ✓Universal hand tool, not device-specific
- ✓Universal hand tool with no chipset or model dependency
- ✓Android phone mainboards, any brand
- ✓iPhone mainboards
- ✓Keypad and feature phone boards
- ✓Tablet mainboards
- ✓Jumper wire and thin copper wire
- ✓Aluminium and soft steel wire
- ✓General electronics and PCB repair benches
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can the YCS Diagonal 180 Pliers Cutter cut copper and aluminium wire?
Is this plier suitable for ISP jumper wire work on dead phones?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock



