2UUL DA89 M-Screen ABC Opener – Screen Pry Tool Set

₨ 1,200

2UUL DA89 Three-Blade Screen Opener

The 2UUL DA89 M-Screen ABC Opener gives mobile repair technicians three pry blades in graded sizes for separating a screen from the frame bracket on smartphones and tablets. Blade A measures 160 mm, blade B 100 mm and blade C 75 mm, so you match the blade to the gap instead of forcing one tool through every job. The set suits LCD replacement, battery access and board-level repair prep on your repair bench. Mechanicpk supplies it to workshops and service centers that want a controlled first step before soldering, testing or flashing begins.

Out of stock

17 People watching this product now!
Description

2UUL DA89 M-Screen ABC Opener: Three-Blade Screen Separation Set

Every screen job starts with the same risk: one rushed pry cracks the panel or bends the frame bracket. The 2UUL DA89 M-Screen ABC Opener answers that risk with three blades of different length and width. It works as an ABC screen opener for mobile repair on smartphones and tablets, and it lets you choose the blade by the gap in front of you instead of forcing one tool through every model. Cleaner separation protects the display, the flex cables and the frame before any IC change or board work begins.

Blade Sizes and Where Each One Works

The set contains three pry blades with listed dimensions. Blade A measures 160 x 18 x 2.85 mm, blade B measures 100 x 25 x 3.8 mm and blade C measures 75 x 25 x 4 mm. Blade A is the longest and thinnest, so it slides along a long screen edge and cuts through bonded adhesive in one controlled pass. Blades B and C are wider and thicker, which gives you leverage when a bracket resists or a corner needs a firm lift. The whole set weighs 15.7 g net, so your hand stays steady through a long queue of display problem jobs. The listing also describes the blades as scale-calibrated, which helps you judge insertion depth. Distributor listings describe the construction as durable and resistant to deformation, and they describe the grip as ergonomic. Both points matter when you pry the same kind of bracket gap dozens of times a week, because a blade that flexes or a hand that tires leads to slips.

Screen and Frame Bracket Separation Workflow

Start by softening the adhesive with a hot air station or a heating plate at a temperature suited to the phone. Slide blade A into the seam at a corner, then work along the edge in short strokes. Switch to blade B or C only when a bracket holds the panel down. Stop and check the gap under a microscope before you go deeper near the flex cable, because a slipped blade damages the display connector far faster than it saves time. Once the screen lifts, the board sits open for the next step: battery access, charging port repair, jumper lagana on a damaged line or a full hardware fault check on a dead phone. Wipe the seam clean before you fit the new screen, because leftover adhesive changes how the panel sits.

You use the same routine on tablets, where the larger frame gives blade A more run. Keep the blades clean between jobs, because adhesive residue changes how smoothly they glide on the next device.

Where It Fits Beside Your Other Bench Tools

The DA89 sits at the very start of the repair workflow, so it pairs with the tools that follow. After the screen comes off, PCB holders keep the board steady, soldering stations handle connector and component work, and a multimeter confirms the fault before you replace anything. For deeper board jobs, reballing kits cover BGA rework, while test boxes, ISP pinout tools, eMMC programmers and UFS adapters handle the dead after flash and boot loop cases that start with a simple screen removal. Many workshops stock this set as a consumable beside a hot air station and a microscope, then move up to heating press equipment when daily screen volume grows.

Repair shops and service centers that run several benches often keep one set at each station, so a technician never waits for a shared tool in the middle of a screen replacement.

Choose this opener when your bench needs a reliable screen and frame bracket separation tool in a compact three-piece form. It does one job in the repair chain, and it does that job with sizes that match real gaps.

Additional information
Weight0.15 kg
Q & A
Please login to post questions

Key Features

  • Three-piece A, B and C blade set for different gap sizes
  • Blade A at 160 mm for long-edge separation
  • Wider, thicker blades B and C for leverage on stubborn brackets
  • Scale-calibrated blades for controlled insertion depth
  • Durable, deformation-resistant construction per distributor listings
  • Ergonomic grip for long repair sessions
  • Lightweight at 15.7 g net
  • Works on both smartphones and tablets

Specifications

ModelDA89
CategoryOpening Tools
CompatibilitySmartphones, iPhones and tablets (screen and frame bracket separation)
Supported DevicesMobile phones, iPhones and tablets
DimensionsBlade A 160 x 18 x 2.85 mm; Blade B 100 x 25 x 3.8 mm; Blade C 75 x 25 x 4 mm
Weight15.7 g net

Common Repair Uses

  • Screen and frame bracket separation during mobile phone and tablet repair
  • LCD and display replacement
  • Separating the screen from the frame bracket
  • Opening a phone for battery access
  • Reaching the board for charging port repair
  • Opening a dead phone for board-level hardware fault checks
  • Phone and tablet teardown
  • Lifting stubborn corners and brackets with the wider B and C blades
  • Preparing the seam before fitting a new screen

Compatible Devices

  • Universal opener for smartphones, iPhones and tablets — not device-specific
  • Android smartphones with a bonded screen and frame bracket
  • iPhone models that need screen or frame bracket separation
  • Tablets with larger frames
  • Phones from any brand, since the blades are not brand-locked
  • Devices opened for teardown
  • Devices opened for LCD or display replacement
  • Devices opened for battery access
  • Devices opened for board-level inspection

FAQ

What is the product name?
The product name is 2UUL DA89 M-Screen ABC Opener.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is DA89.
What is this product used for?
This product is used for screen and frame bracket separation during mobile phone and tablet repair.
Which devices are compatible with this product?
This product works with smartphones, iPhones and tablets. It is a universal opener, not tied to one brand or model.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What are the blade sizes in the 2UUL DA89 set?
The set has three blades. Blade A measures 160 x 18 x 2.85 mm, blade B measures 100 x 25 x 3.8 mm and blade C measures 75 x 25 x 4 mm.
Can the 2UUL DA89 open both smartphones and tablets?
Yes. Distributor listings state it separates screens and frame brackets on smartphones, iPhones and tablets.