Qianli Bumblebee Stencil (QS40) Sam1 C,J,A Series Mix

₨ 799

Qianli QS40 Samsung CPU Reballing Stencil

Qianli Bumblebee Stencil (QS40) Sam1 C,J,A Series Mix is a chipset-specific BGA reballing template for Samsung C7010, J610, C7, J3, J5 and A5 series boards built on the Qualcomm MSM8916 and MSM8953 CPU. Qianli cuts square holes with rounded corners into flexible, high-temperature-resistant steel, so paste and balls release cleanly across the pad field. Use it after you lift a CPU to fix a dead phone or hang on logo fault, and reball in one aligned pass. The package contains one stencil. Mechanicpk supplies it to Pakistani repair shops that want exact-fit tooling for Samsung CPU rework.

In stock

11 People watching this product now!
Description

Qianli QS40 Stencil for Samsung J3 J5 A5: Precision CPU Reballing for MSM8916 and MSM8953 Boards

The Qianli QS40 stencil for Samsung J3 J5 A5 gives your bench a dedicated reballing template for the Qualcomm MSM8916 and MSM8953 CPU footprints on Samsung C7010, J610, C7, J3, J5 and A5 series boards. The Qianli Bumblebee Stencil (QS40) Sam1 C,J,A Series Mix belongs to the Bumblebee line, where each stencil matches one chipset layout instead of trying to cover every BGA package. That chipset-specific approach matters at CPU level. The apertures follow the pad pattern of the target processor, so you place every ball in a single pass and spend less time correcting strays under the microscope. Mechanicpk supplies the QS40 to Pakistani workshops that handle Samsung entry-level and mid-range boards in volume.

Square-Hole Design and Steel Build

Qianli cuts the QS40 with square holes and rounded corners, a layout the Bumblebee range uses across its BGA stencils. The rounded corners help solder paste or balls release cleanly from each aperture, which keeps ball height consistent across the whole CPU pad field. The stencil uses selected steel with high flexibility and high-temperature resistance, so it flexes against the board without creasing and tolerates hot air rework heat during repeated use.

A single stencil covers the MSM8916 and MSM8953 CPU pattern, which means one tool serves several Samsung model families that share this processor layout. You keep fewer stencils on the bench and stop hunting for the right one every time a Galaxy J5 or A5 lands on your table with a hardware fault.

Where the QS40 Fits in Your CPU Rework Workflow

Most QS40 jobs start with a dead phone, a hang on logo problem, or a board that stopped booting after a drop or a failed flash. Once you confirm the fault points to the CPU solder joints, the workflow runs in a fixed order. Secure the board in a PCB holder, lift the CPU with a hot air station, and clean the pads with flux and desoldering wick under the microscope. Align the QS40 over the cleaned pads, apply paste or place balls through the apertures, and reflow with controlled hot air. Lift the stencil away, seat the CPU, and reflow it onto the board.

After the CPU settles, check continuity with a multimeter before you power the board. This step catches bridged or missing balls early and saves you a second teardown. Technicians who run a soldering station alongside a hot air station get the cleanest results, because the soldering iron handles pad prep while the hot air station handles reflow.

Pair the stencil with a reballing kit that includes balls and paste, since the QS40 ships as a single stencil with no consumables. Workshops that rework eMMC on the same boards can move to eMMC programmers and ISP pinout tools for the memory side of the repair, which gives you a clear upgrade path from CPU reballing to full board-level diagnostics.

Choosing the QS40 Over a Multi-Function Universal Stencil

Multi-function universal stencils cover several pitches on one sheet, and they suit general BGA work. The QS40 works differently. Its apertures match the exact MSM8916 and MSM8953 CPU layout, so alignment takes seconds and you avoid the trial-and-error that a universal sheet sometimes demands on a dense CPU footprint. If your shop sees these Samsung boards daily, a chipset-specific stencil pays for itself in saved bench time and fewer failed reflows.

Check the processor on the board before you order. The QS40 targets the MSM8916 and MSM8953 CPU footprints only, so confirm your Samsung model uses one of them. For other chipsets, such as Exynos, MediaTek or newer Snapdragon boards, pick the matching Bumblebee stencil from the Qianli range.

Additional information
Weight0.5 kg
Q & A
Please login to post questions

Key Features

  • Chipset-specific template for the Qualcomm MSM8916 and MSM8953 CPU footprints
  • Square holes with rounded corners for clean paste and ball release
  • Selected steel with high flexibility and high-temperature resistance
  • One stencil covers multiple Samsung C, J and A series board families
  • Aligns to the CPU pad pattern for single-pass ball placement
  • Suits hot air station reflow in a standard rework workflow
  • Qianli Bumblebee series build for repeated workshop use
  • Ships as a single stencil, ready to pair with your reballing kit

Specifications

Brand EntityQianli (Bumblebee Series)
Product EntityQianli Bumblebee Stencil QS40 BGA reballing stencil
Technology EntitySquare-hole round-angle BGA stencil, Qualcomm MSM8916 and MSM8953 CPU
Compatible Device EntitiesSamsung C7010, J610, C7, J3, J5, A5 series
Repair Process EntityCPU reballing and BGA rework
Industry EntityMobile phone repair, PCB repair, Pakistan

Common Repair Uses

  • CPU-level reballing and rework on supported Samsung boards
  • CPU reballing after lifting an MSM8916 or MSM8953 processor
  • Fixing a dead phone caused by cracked or lifted CPU solder joints
  • Repairing hang on logo faults tied to CPU ball connections
  • Rebuilding solder balls after board drop damage
  • Reflowing a CPU with fresh paste through the stencil apertures
  • Restoring boards that died after a failed flash and show a hardware fault
  • Reworking Samsung J3, J5 and A5 boards in volume repair shops
  • Pad-field preparation and ball alignment during board-level CPU rework

Compatible Devices

  • Samsung C, J and A series boards built on the Qualcomm MSM8916 and MSM8953 CPU
  • Samsung C7010
  • Samsung J610
  • Samsung C7
  • Samsung J3 series
  • Samsung J5 series
  • Samsung A5 series
  • Qualcomm MSM8916 CPU
  • Qualcomm MSM8953 CPU

FAQ

What is the product name?
The product name is Qianli Bumblebee Stencil (QS40) Sam1 C,J,A Series Mix.
What is the brand of this product?
The brand of this product is Qianli.
What is the model of this product?
The model of this product is QS40.
What is this product used for?
This product is used for BGA reballing of the MSM8916 and MSM8953 CPU on supported Samsung boards.
Which devices are compatible with this product?
This product is compatible with Samsung C7010, J610, C7, J3, J5 and A5 series boards that use the MSM8916 or MSM8953 CPU.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which CPUs does the Qianli QS40 stencil support?
The QS40 supports the Qualcomm MSM8916 and MSM8953 CPU footprints used on Samsung C7010, J610, C7, J3, J5 and A5 series boards.
Can I use the QS40 stencil for eMMC or NAND reballing?
No. The QS40 targets the MSM8916 and MSM8953 CPU footprints. For eMMC or NAND, choose a stencil made for that memory package.