Relife RL-044 XM15 Stencil for Snapdragon 8 Gen 1 BGA
₨ 599
XM15 Stencil for Snapdragon 8 Gen 1 Reballing
The Relife RL-044 XM15 Stencil gives you a 0.12 mm steel reballing template cut for the Qualcomm Snapdragon 8 Gen 1 (SM8450) and Snapdragon 870 (SM8250) footprints used on the Xiaomi 12, Xiaomi 12 Pro, Xiaomi 12X and Redmi K50 Gaming. Lay it over a cleaned CPU, press in your paste or solder balls, and reflow with a hot air station to rebuild a consistent ball array. Mechanicpk supplies it to technicians and repair shops across Pakistan who handle high-end Xiaomi board-level repair and need a precise, reusable CPU reballing template.
In stock
Relife RL-044 XM15 Stencil: Precision CPU Reballing for Snapdragon 8 Gen 1 Xiaomi Boards
The Relife RL-044 XM15 stencil does one job well: it rebuilds the solder ball array on Qualcomm Snapdragon 8 Gen 1 (SM8450) and Snapdragon 870 (SM8250) processors from Xiaomi 12-series and Redmi K50 Gaming boards. Relife numbers its Xiaomi plates in the RL-044 range from XM1 upward, and XM15 is the plate for these flagship-class CPUs. You get one 0.12 mm steel template that fits any bench already equipped with a hot air station and a reballing platform. Mechanicpk stocks it for Pakistani repair shops that handle high-end Xiaomi board-level work.
Key Technical Highlights
The plate is a 0.12 mm steel template, and steel keeps its shape under hot air reflow better than plastic templates do. The XM15 is listed for the Xiaomi 12, Xiaomi 12 Pro, Xiaomi 12X and Redmi K50 Gaming CPU footprints. The Xiaomi 12 and 12 Pro run the Snapdragon 8 Gen 1, while the 12X runs the Snapdragon 870, so this one plate serves both chipset families. Compare the CPU marking and pad layout on your board against the plate before you start. A stencil only delivers a clean ball array when its footprint matches the package exactly, and a wrong plate wastes a CPU and a reflow cycle.
Reballing Workflow Fit
Start with the CPU off the board. Heat it with a hot air station, lift it, and clean the pads on both the chip and the PCB with a soldering station and desoldering wick. Apply flux, then fix the CPU in a reballing platform or PCB holder so nothing shifts. Lay the XM15 over the chip, line up every aperture with its pad, and press paste or balls into the openings. Reflow gently until the balls form, let the plate cool before you lift it, and inspect the array under a microscope before you place the CPU back. One bridged or missing ball sends you back to the start, so take your time at this step.
Technicians reach for a reballing plate when CPU solder joints are the suspect behind a dead phone, a boot loop issue or a hang on logo. After you reinstall the CPU, check the power rails with a multimeter in diode mode before you power the board. That check protects your replacement parts and your bench time, and it catches shorts while the board is still safe to rework.
Choosing the XM15 and Your Upgrade Path
Order the XM15 when your bench regularly sees Snapdragon 8 Gen 1 or Snapdragon 870 Xiaomi boards and you want a single plate without buying a full set. If your work spans older Mi, Redmi and Note boards, the broader Relife RL-044 XM1–XM15 set covers those footprints. Pair the plate with a Reballing Kit for balls and paste, a magnetic platform or PCB Holders for stability, and a Microscope for inspection. Technicians who outgrow basic rework often move to a stronger Hot Air Station or a temperature-controlled Soldering Station, plus a Multimeter and Test Box for post-repair checks. When a reballed board still fails to boot, shift to storage diagnosis with ISP Pinout Tools, eMMC Programmers or UFS Adapters.
| Weight | 0.1 kg |
|---|
Key Features
- ✓0.12 mm steel stencil plate
- ✓Matched to the Snapdragon 8 Gen 1 (SM8450) CPU footprint
- ✓Also listed for Snapdragon 870 (SM8250) boards
- ✓Covers Xiaomi 12, 12 Pro, 12X and Redmi K50 Gaming
- ✓Part of the Relife RL-044 XM Xiaomi plate range
- ✓Single-plate supply (1 x stencil) with no full-set purchase needed
- ✓Works with a standard hot air station and reballing platform workflow
- ✓Reusable steel construction
Specifications
| Brand | Relife |
|---|---|
| Model | RL-044 XM15 |
| Category | BGA Reballing Stencil |
| Compatibility | Xiaomi 12, Xiaomi 12 Pro, Xiaomi 12X, Redmi K50 Gaming |
| Supported Devices | Xiaomi 12, Xiaomi 12 Pro, Xiaomi 12X, Redmi K50 Gaming |
| Technology | Qualcomm Snapdragon 8 Gen 1 (SM8450) and Snapdragon 870 (SM8250) CPU BGA footprint |
| Material | Steel, 0.12 mm thickness |
| Package | 1 x Stencil |
Common Repair Uses
- ✓CPU-level reballing on matching Xiaomi and Redmi boards
- ✓CPU reballing after removal from the board
- ✓Replacing solder balls on a replacement or donor CPU
- ✓Restoring solder joints after a CPU lifts during rework
- ✓Rebuilding the ball array after under-chip pad cleaning
- ✓PCB repair on Xiaomi 12-series boards with suspected CPU joint faults
- ✓Hardware fault diagnosis on a dead phone, boot loop issue or hang on logo case
- ✓Hot air station reflow with a reballing platform
- ✓Pre-install ball inspection under a microscope
Compatible Devices
- ✓Verified compatibility scope: Xiaomi 12-series and Redmi K50 Gaming boards with Qualcomm Snapdragon 8 Gen 1 or Snapdragon 870 CPUs
- ✓Xiaomi 12
- ✓Xiaomi 12 Pro
- ✓Xiaomi 12X
- ✓Redmi K50 Gaming (E-Sports Edition)
- ✓Qualcomm Snapdragon 8 Gen 1 (SM8450) CPU
- ✓Qualcomm Snapdragon 870 (SM8250) CPU
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which Snapdragon chipsets does the Relife RL-044 XM15 stencil match?
What thickness is the XM15 stencil and what do you use it with?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock



