Qianli Bumblebee Stencil QS50 SAM11 for Samsung S8

₨ 600

Qianli QS50 SAM11 Stencil for Samsung S8 Boards

The Qianli QS50 SAM11 stencil gives you a purpose-built Bumblebee-series template for CPU reballing on the Samsung Galaxy S8, S8+ and Note 8. It covers both processor platforms used in this generation, Exynos 8895 and Snapdragon MSM8998, so one stencil serves the G9500, G955U and N9500 board families on your bench. If a dead phone traces back to a lifted or damaged CPU, this template lets you restore the ball pattern and reseat the chip with confidence. Pair it with a hot air station, a microscope and your usual reballing kit to complete the job at board level.

In stock

20 People watching this product now!
Description

Qianli QS50 SAM11 Stencil for Samsung Galaxy S8 CPU Reballing

The Qianli QS50 SAM11 stencil targets one job: restoring the solder ball array under the CPU on Samsung Galaxy S8, S8+ and Note 8 motherboards. Qianli builds it as part of the Bumblebee stencil series and designates it as a universal series stencil for the Exynos 8895 and MSM8998 processors. When you lift a CPU for a hardware fault such as a dead phone, a charging issue after impact damage or a boot loop that points to a cold joint, the stencil defines the ball pattern you rebuild. A template that matches the platform removes the guesswork from alignment and keeps your reballed chip repeatable from one board to the next.

Platform Coverage: Exynos 8895 and MSM8998

This stencil covers the two silicon variants Samsung shipped in the S8 generation. Exynos 8895 boards typically come from international units such as the G9500, while MSM8998 (Snapdragon 835) boards appear in US-variant units such as the G955U. Qianli lists the QS50 for the S8, S8+ and Note 8 series, which means you stock a single template for three popular models instead of three separate ones. For a workshop that handles Samsung flagship repair weekly, that coverage cuts your stencil inventory and speeds up job setup. Check the CPU marking on the board before you start, because the stencil is specific to this S8-generation platform.

Where the Stencil Fits in a CPU Reball Workflow

A reball starts after you remove the CPU with a hot air station and clean the pads on both the chip and the board. Use your soldering station and wick to level the remaining solder, then wash off the flux residue. Fix the chip in a PCB holder, lay the QS50 over it and align the apertures under a microscope until every pad shows through. Apply paste or place balls through the openings, lift the stencil away and reflow the chip with controlled hot air. Inspect the result under magnification, then reseat the CPU on the board. After you reassemble the board, a multimeter check on the main power rails confirms the repair before you hand the phone back. This sequence suits IC change karna jobs and CPU rework where the pad geometry decides whether the repair holds.

Choosing the QS50 Over Neighbouring Models

Qianli numbers its Bumblebee stencils by device generation, so the right pick depends on the board in front of you. The QS50 belongs to the Galaxy S8 generation. Galaxy S7 boards use a different template, and Qianli lists the QS47 SAM8 for the S7 series with Exynos 8890 and MSM8996. Confirm the model and CPU family first, then order the matching stencil. If you work across several generations, build your set progressively: start with the QS50 for the S8 line, add neighbouring Samsung templates as jobs arrive, and expand into a full reballing kit when your volume justifies it. That upgrade path keeps your investment tied to the repairs your customers actually bring in.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Dedicated Qianli Bumblebee-series stencil for the Samsung S8 generation
  • Covers both Exynos 8895 and MSM8998 CPU platforms
  • Serves the S8, S8+ and Note 8 with one template
  • Defines the CPU ball pattern for repeatable reballing
  • Works with your hot air station, soldering station and microscope
  • Fits alongside reballing kits and PCB holders on the repair bench
  • Reduces alignment guesswork on dead phone and boot loop repairs
  • Suits repair shops, service centers and training benches

Specifications

BrandQianli
ModelQS50 SAM11
CategoryBGA Reballing Stencil (Bumblebee Series)
CompatibilitySamsung Galaxy S8 / S8+ / Note 8 – Exynos 8895 and MSM8998 CPU Universal Series
Supported DevicesG9500, G955U, N9500

Common Repair Uses

  • CPU-level reballing and rework on Samsung S8-generation boards
  • Exynos 8895 CPU reballing
  • MSM8998 CPU reballing
  • Restoring solder balls after CPU removal
  • Dead phone repair traced to a lifted CPU
  • Boot loop issue caused by a cold joint under the CPU
  • Charging issue repair after a drop or board flex
  • Reflowing and reseating a CPU after pad cleaning
  • Workshop reballing jobs for Samsung flagship boards

Compatible Devices

  • Samsung Galaxy S8, S8+ and Note 8 board families with Exynos 8895 or MSM8998 CPUs
  • Samsung Galaxy S8 (G9500)
  • Samsung Galaxy S8 (G950F and related G950 variants)
  • Samsung Galaxy S8+ (G955U)
  • Samsung Galaxy Note 8 (N9500)
  • Exynos 8895 CPU boards
  • Snapdragon 835 / MSM8998 CPU boards
  • Samsung S8 / S8+ / Note 8 universal CPU series
  • Boards in the Samsung S8 generation only (not S7 or S9 boards)

FAQ

What is the product name?
The product name is Qianli Bumblebee Stencil (QS50) SAM11.
What is the brand of this product?
The brand of this product is Qianli.
What is the model of this product?
The model of this product is QS50 SAM11.
What is this product used for?
This product is used for reballing the CPU on Samsung Galaxy S8, S8+ and Note 8 motherboards.
Which devices are compatible with this product?
This product is compatible with the Samsung Galaxy S8, S8+ and Note 8 series, including the G9500, G955U and N9500, with Exynos 8895 or MSM8998 CPUs.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the QS50 SAM11 work on both Exynos 8895 and Snapdragon MSM8998 S8 boards?
Yes. Qianli lists the QS50 as a universal series stencil for the Samsung S8, S8+ and Note 8 covering both the Exynos 8895 and MSM8998 CPUs.
Can I use the QS50 stencil on a Samsung Galaxy S7 board?
No. The QS50 belongs to the S8 generation. Qianli lists the QS47 SAM8 for the Galaxy S7 series with Exynos 8890 and MSM8996, so choose that template for S7 boards.