2UUL DA98 Aiolos Fan – Smoke Extractor & Cooling

₨ 4,500

2UUL DA98 Aiolos 3-in-1 Repair Fan

The 2UUL DA98 Aiolos fan packs smoke extraction, board cooling and work lighting into a 110 × 110 × 38 mm cordless unit for your repair bench. A built-in 3.7V 1200mAh battery charges over USB, so you place the fan exactly where the fumes rise without dragging a power cable across your PCB holder. Three speed gears top out at 6500 r/min, a two-gear timer shuts the fan down on schedule, and a four-level display shows the remaining charge. Use it after BGA reballing, IC change karna, connector replacement or SMD rework to pull flux smoke away from your face and bring the board down to handling temperature quickly.

In stock

16 People watching this product now!
Description

2UUL DA98 Aiolos Fan for Mobile Repair Benches

The 2UUL DA98 Aiolos fan replaces three separate bench accessories with one rechargeable unit. You get a fume extractor with an activated carbon filter, a cooling fan and a work light in a single 110 × 110 × 38 mm housing. Mechanicpk supplies it to technicians who buy on specifications: a 3.7V 1200mAh battery, USB charging and a 6500 r/min maximum fan speed. Every function targets one job, which is keeping the area around a hot motherboard clean, cool and visible.

Three Functions, One Housing

Smoke extraction comes first. Flux and solder fumes rise the moment your hot air gun or iron touches a board, and the Aiolos pulls them through an activated carbon filter before they reach your breathing zone. A soldering smoke extractor fan only helps if it sits close to the work, and the cordless design lets you park it beside the board instead of tethering it to a socket.

Cooling comes second. The manufacturer’s material rates the cooling cycle at about 3 seconds, which shortens the wait between a rework step and the next inspection. Solder joints set faster, and you handle the board sooner. The fan head rotates 360°, so you aim the airflow at a CPU, eMMC or charging IC area without moving the whole unit.

Lighting comes third. The built-in lamp throws light across the board, and the maker’s manual also describes it as a UV curing light. That makes it useful when you inspect fine SMD pads under a microscope and need extra side lighting.

Speed, Timer and Power Controls

The control set stays simple. Three speed gears let you drop to a gentle airflow around small passive components or push to the 6500 r/min maximum when you need fast heat removal. A two-gear timer switches the fan off on its own, which helps when you leave a board to cool and move to the next job. One button shuts the unit down, and a four-level indicator shows the remaining battery so you know when to plug in the USB cable.

Because the 1200mAh cell sits inside the body, you can carry the fan between workstations or move it around a crowded bench without untangling cords. Charge it before a long reballing session, and keep the USB cable nearby for top-ups.

Where It Sits in the Repair Workflow

In board-level repair, the Aiolos covers the stage right after heat. You finish a reflow, an IC change or a jumper lagana job on a dead phone or a hardware fault board, and you switch the fan on to extract the last flux smoke and bring the temperature down. It pairs with the tools on either side of that step: a hot air station or soldering station supplies the heat, a PCB holder keeps the board steady, a reballing kit handles BGA work, and a microscope lets you check the result. The fan does not replace any of them. It closes the loop between rework and inspection.

The tool suits charging port replacement, connector work, CPU and BGA reballing, SMD component swaps and general board cleaning. It works as a universal bench accessory, so it does not depend on a phone brand or chipset family. If you run a repair shop or service center, one unit per rework station keeps fume exposure down across the whole team and gives every technician the same cooling routine.

Additional information
Weight0.3 kg
Q & A
Please login to post questions

Key Features

  • 3-in-1 design combining smoke extraction, cooling and lighting
  • Activated carbon filter for fume extraction
  • About 3-second cooling cycle per manufacturer material
  • 360° rotatable head
  • Three-gear speed control up to 6500 r/min
  • Two-gear timer with one-button shutdown
  • Four-level battery display
  • Built-in 3.7V 1200mAh battery with USB charging for cordless use

Specifications

Brand2UUL
ModelDA98 Aiolos Fan
CategorySoldering Accessories
CompatibilityUniversal bench tool, not device-specific
Technology3-in-1 smoke extraction, cooling and lighting with activated carbon filter
Dimensions110 × 110 × 38 mm
Weight340 g (gross)

Common Repair Uses

  • Smoke extraction, board cooling and lighting during soldering and rework
  • BGA and CPU reballing
  • IC change karna
  • Connector and charging port replacement
  • SMD component soldering
  • Jumper lagana on damaged tracks
  • Flux smoke extraction at the bench
  • Cooling boards after hot air work
  • Side lighting and UV curing for board inspection

Compatible Devices

  • Universal — works at the bench with any phone motherboard, not device-specific
  • Android phone motherboards
  • iPhone logic boards
  • CPU and BGA chip areas
  • eMMC and UFS board areas
  • SMD component zones
  • Charging port and connector areas
  • Display flex connector areas
  • Small PCB and module boards

FAQ

What is the product name?
The product name is 2UUL DA98 Aiolos Fan.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is DA98 Aiolos Fan.
What is this product used for?
This product is used for smoke extraction, board cooling and work lighting during mobile phone soldering and rework.
Which devices are compatible with this product?
This product is a universal bench tool and does not depend on a specific phone brand or chipset.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the 2UUL DA98 Aiolos Fan run without a power cable?
Yes. It has a built-in 3.7V 1200mAh battery that charges over USB, so you use it cordless at the bench.
What speed and timer settings does the 2UUL DA98 Aiolos Fan offer?
It has three speed gears up to 6500 r/min, a two-gear timer, one-button shutdown and a four-level battery display.