2UUL FA01 Remove Screen OCA Wet Wipes (50 Pcs/Box)
₨ 1,600
2UUL FA01 OCA Glue Remover Wipes
The 2UUL FA01 Remove Screen OCA Wet Wipes (50 Pcs/Box) give your refurbishing bench a pre-moistened OCA glue remover wipe in a compact, sealed carton. Each wipe carries a non-corrosive, quick-drying solution that lifts OCA glue, adhesive, and residue from LCD, touch screen, and glass surfaces after separation. The single-use sealed design protects FPC flex cable and glass, and the formula contains no heavy metals or trichloroethylene. Fifty soft non-woven wipes measuring 60×80×3 mm cover daily OCA/LOCA refurbishing for mobile, tablet, and laptop displays, so you skip mixing solvents and start cleaning straight away.
In stock
2UUL FA01 OCA Glue Remover Wipes for Display Refurbishing
The 2UUL FA01 Remove Screen OCA Wet Wipes put ready-to-use OCA glue remover wipes into a 50-piece box, so your bench never waits on mixing, measuring, or decanting solvent. Each wipe arrives pre-moistened with a non-corrosive, quick-drying solution that targets OCA glue, adhesive, and the residue left on LCD, touch screen, and glass surfaces after separation. Mechanicpk stocks the FA01 for shops that run OCA/LOCA refurbishing every day and need a consistent consumable with defined carton dimensions and net weight, not an unmarked bottle and a roll of tissue.
Formulation, Material, and Pack Specifications
The FA01 uses a soft non-woven fabric carrier. Each wipe measures 60×80×3 mm, which fits a two-finger grip and covers a full edge strip of a phone panel in one pass. The solution dries quickly and leaves no residue or streaks, and the manufacturer lists the wipes as free of heavy metals and trichloroethylene. Each wipe uses a single-use sealed waterproof design, so you open only what the job needs and the rest stay wet. The carton measures 123×95×84 mm and weighs 282 g net for all 50 pieces, a footprint that fits a bench drawer or the shelf beside your separator station.
The manufacturer positions the formula as safe for FPC flex cable and glass. That matters on a refurbishing line, where one aggressive solvent pass near a bonded flex ruins a panel worth far more than the consumable.
Where the FA01 Fits in the OCA/LOCA Refurbishing Workflow
Screen refurbishing follows a fixed sequence, and the wipe belongs in the cleanup stage. You heat and separate the glass from the LCD, peel away the bulk OCA sheet, then face the thin adhesive film that clings to the glass and the display edges. A wet wipe dissolves that film in controlled passes, so you scrub less and stress the panel less. After wiping, you inspect the surface under a microscope, confirm the glass is clean, and move to LOCA or fresh OCA lamination.
The same logic applies across panel types. The FA01 suits mobile, tablet, and laptop displays, so one box serves a bench that handles phone screens in the morning and tablet glass in the afternoon. For display problem jobs such as cracked glass with a working LCD, the wipe keeps the reusable LCD clean and ready for re-lamination. Pair it with a hot air station or heating platform for separation and a PCB holder or fixture to steady the panel while you work.
Buying Notes for Repair Shops and Refurbishing Units
A 50-piece box sets a predictable cost per panel. Count roughly how many wipes your typical screen needs, and you can forecast monthly consumption from your daily refurbishing volume instead of guessing at bottle levels. The sealed box also keeps storage simple: close the carton between jobs and store it flat, away from heat sources.
Test the FA01 on a spare panel the first time you use it, especially on displays with exposed polarizer edges or delicate flex connections, then adopt the same pressure and wipe pattern across your team. Consistent technique matters more than extra scrubbing. Keep a second box in reserve if your shop refurbishes at volume, since a bench that runs out of cleanup consumables stalls the whole lamination queue. Technicians who already buy separators, microscopes, and PCB holders from Mechanicpk can add the FA01 to the same order and keep every stage of the refurbishing line supplied.
| Weight | 0.35 kg |
|---|
Key Features
- ✓Pre-moistened wipes need no mixing or extra liquid
- ✓Non-corrosive, quick-drying cleaning solution
- ✓Leaves no residue or streaks on cleaned surfaces
- ✓Targets OCA glue, adhesive, and residue
- ✓Safe for FPC flex cable and glass per manufacturer
- ✓No heavy metals and no trichloroethylene
- ✓Single-use sealed waterproof design
- ✓50 soft non-woven wipes in a compact box
Specifications
| Brand | 2UUL |
|---|---|
| Model | FA01 |
| Category | OCA Glue Remover Wet Wipes (Screen Repair Consumables) |
| Compatibility | Universal for mobile, tablet, and laptop displays — not device-specific |
| Supported Devices | Mobile, tablet, and laptop displays |
| Material | Soft non-woven fabric |
| Quantity | 50 pcs per box |
| Wipe Size | 60×80×3 mm |
| Package Size | 123×95×84 mm |
| Net Weight | 282 g (box of 50) |
Common Repair Uses
- ✓Real-world screen refurbishing and glue cleanup workflows
- ✓Removing OCA glue residue after glass separation
- ✓Cleaning adhesive from LCD surfaces before re-lamination
- ✓Cleaning leftover glue from touch screen glass
- ✓Preparing glass and LCD for LOCA refurbishing
- ✓Preparing glass and LCD for fresh OCA lamination
- ✓Wiping adhesive near FPC flex cable edges
- ✓Cleaning display edges before bonding
- ✓Daily cleanup on a screen refurbishing bench
Compatible Devices
- ✓Universal scope — mobile, tablet, and laptop displays (not tied to a specific phone model or chipset)
- ✓Mobile phone LCD displays
- ✓Mobile phone touch screen glass
- ✓Mobile phone glass after screen separation
- ✓Tablet LCD displays
- ✓Tablet touch screen glass
- ✓Laptop displays
- ✓OCA-bonded display assemblies
- ✓LOCA-bonded display assemblies
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Do OCA wet wipes damage the FPC flex cable on a display?
Does the 2UUL FA01 contain heavy metals or trichloroethylene?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock



