Back to products
2UUL SC95 LQ Wire Conductive Silver Paste
2UUL SC95 LQ Conductive Silver Paste Jump Wire Original price was: ₨ 1,600.Current price is: ₨ 1,450.

2UUL MT11 X-Ray Coil Wireless Charging Detection

₨ 800

2UUL MT11 Magnetic Coil Detection Card

The 2UUL MT11 X-Ray Coil Wireless Charging Detection card gives you a quick visual check of the magnet ring inside an iPhone wireless charging coil. You hold the sheet against the phone or a loose back glass, and the magnetic pole pattern shows on the surface, so you spot a broken, missing or misaligned ring before you open the board. It suits iPhone 12 and later models that use magnet-equipped coils, and you reuse it for repeated checks. Mechanicpk supplies it to technicians in Pakistan who verify back glass replacements and troubleshoot MagSafe charging issues.

In stock

17 People watching this product now!
Description

2UUL MT11 X-Ray Coil: Wireless Charging Coil Detection Tool for iPhone

The 2UUL MT11 X-Ray Coil Wireless Charging Detection card is a wireless charging coil detection tool that does one job: it shows you the magnet state of an iPhone charging coil without a teardown. You bring the sheet close, and the magnetic pole layout appears on its surface. A complete ring looks even and continuous. A partial or missing ring stands out at once. When a customer walks in with a MagSafe charging issue, you get a first answer before a single screw comes out of the phone.

How the MT11 Reads the Magnet Ring and Which iPhones It Supports

The MT11 belongs to the magnetic observation family of repair sheets. It shows you where the magnets sit and does not replace electrical testing. You approach the part under test, whether that is a complete iPhone or a loose back glass assembly, and the pole distribution becomes visible right away. The sheet works through the surface, so you keep the original structure intact and skip disassembly. The card uses a durable sheet material and leaves no residue, so you reuse it from one phone to the next. That makes this iPhone wireless charging coil test card a low-effort addition to any inspection routine.
The MT11 only works with wireless charging coils that carry magnets. That covers iPhone 12 and later models with a MagSafe-style ring. It does not cover the iPhone 8 and 8 Plus, which charge over Qi without magnets. It also skips the iPhone 16e and the iPhone SE (3rd generation), because both support Qi only and carry no MagSafe ring. Android coils without magnets fall outside its scope as well. If your bench handles mostly Android boards, treat this card as a specialist add-on rather than a core tool.

Where It Fits in Your Repair Workflow

Back glass replacement is the clearest use. After you fit a new glass, place the MT11 against it and confirm the ring is whole and sits where it should. The same check helps when a customer reports that MagSafe stopped snapping on after an earlier repair, because an incomplete ring can point to a phone that someone opened or fitted with a replacement back glass. When you buy second-hand stock, this MagSafe magnet detection card backs up your grading with a visible result instead of a guess. Keep a known-good reference coil beside your bench so you can compare the pole pattern of a suspect part against a healthy one in seconds.
The card works best as the first step in a longer workflow. Pair it with Multimeters for coil continuity checks, Microscopes for flex cable inspection, and PCB Holders to keep the board steady while you work. Hot Air Stations and Soldering Stations handle the board-level rework that follows, and Reballing Kits and Test Boxes cover deeper hardware fault work. Browse those Mechanicpk categories to build the whole bench around one quick visual test.

Why This Wireless Charging Coil Detection Tool Earns Bench Space

A customer who says wireless charging is not working gives you no clue whether the phone has a damaged magnet ring, a coil problem or a board issue. The MT11 narrows that question quickly. A healthy ring tells you to move on and test the board. A damaged ring tells you the glass assembly needs replacing, so you avoid IC change karna on a board that never had a fault. You also show the customer a visible result, which shortens the cost conversation at the counter.
Repair shops, service centers and training benches can add this tool without heavy equipment or software. Store the card flat between jobs so the surface stays clean and ready for the next check. If your daily jobs include iPhone 12 and later models, the MT11 gives you a fast, repeatable magnet check that supports clear decisions on every back glass and MagSafe job.

Additional information
Weight0.10 kg
Q & A
Please login to post questions

Key Features

  • Magnetic pole observation sheet that shows the magnet ring layout instantly
  • Works with iPhone 12 and later models that use magnet-equipped coils
  • Non-destructive check that keeps the phone’s original structure intact
  • Reusable card that leaves no residue between tests
  • Tests complete phones or loose back glass assemblies
  • Helps you spot an incomplete ring that can point to a replaced back glass
  • Compact, portable sheet that fits any repair bench
  • Green label with transparent window for easy alignment

Specifications

Brand2UUL
ModelMT11
CategoryWireless Charging Detection Tool
CompatibilityWireless charging coils with magnets (MagSafe-style magnet ring)
Supported DevicesiPhone 12 and later (excluding iPhone 16e and iPhone SE 3rd generation)
TechnologyMagnetic pole observation
MaterialDurable sheet

Common Repair Uses

  • Verifying the magnet ring on iPhone wireless charging coils
  • Checking the magnet ring after a back glass replacement
  • Diagnosing MagSafe not snapping on or aligning correctly
  • Testing a loose back glass assembly before fitting it
  • Spotting an incomplete ring that can point to a previously opened phone
  • Grading second-hand and refurbished iPhone stock
  • Separating magnet ring faults from board-level charging issues
  • Comparing a suspect coil against a known-good reference
  • Final quality check before handing the phone back to the customer

Compatible Devices

  • iPhone models with a magnet-equipped wireless charging coil
  • iPhone 12 series
  • iPhone 13 series
  • iPhone 14 series
  • iPhone 15 series
  • iPhone 16 series (excluding iPhone 16e)
  • Later iPhone models with a MagSafe-style magnet ring
  • Loose iPhone back glass assemblies with a magnet-equipped coil
  • Not compatible: iPhone 8/8 Plus, iPhone SE 3rd generation, iPhone 16e

FAQ

What is the product name?
The product name is 2UUL MT11 X-Ray Coil Wireless Charging Detection.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is MT11.
What is this product used for?
This product is used for checking the magnet ring of an iPhone wireless charging coil, for example after a back glass replacement or when MagSafe does not snap on correctly.
Which devices are compatible with this product?
This product is compatible with iPhone 12 and later models that carry a magnet-equipped wireless charging coil. It excludes the iPhone 16e and the iPhone SE 3rd generation.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the 2UUL MT11 work on iPhone 11, iPhone 8 or iPhone SE?
No. The MT11 only works with wireless charging coils that have magnets. The iPhone 8, iPhone 8 Plus, iPhone SE 3rd generation and iPhone 16e use Qi charging without a MagSafe magnet ring, and older models without that ring fall outside its scope.
Can the 2UUL MT11 find an electrical fault in a wireless charging coil?
No. The MT11 shows the magnetic pole distribution of the coil. It does not test electrical faults. For a coil or charging circuit problem, test continuity with a multimeter and inspect the board under a microscope.