2UUL SC95 LQ Conductive Silver Paste Jump Wire
₨ 1,600 Original price was: ₨ 1,600.₨ 1,450Current price is: ₨ 1,450.
2UUL SC95 LQ Liquid Jump Wire Paste
The 2UUL SC95 LQ conductive silver paste for mobile repair gives you a liquid jump wire for broken traces on phone and laptop motherboards and on phone screen flex cables. 2UUL targets iPhone screen line faults, including green and yellow screen circuits, and adds a jump wire tool to the pack for precise placement. You paint the conductive path across the break instead of soldering a micro wire onto a damaged pad. Each unit holds 2 g net paste. Mechanicpk stocks it for Pakistani repair shops, service centers and technicians who handle display problem and trace repair jobs every week.
In stock
Conductive Silver Paste for Mobile Repair: 2UUL SC95 LQ Jump Wire Paste
The 2UUL SC95 LQ is a conductive silver paste for mobile repair that replaces hair-thin jumper wire on broken traces and flex lines. 2UUL builds it as a liquid jump wire paste and packs a jump wire tool with it. You draw a conductive path across the break instead of soldering a micro wire onto a pad that barely exists anymore. Technicians reach for this class of material when a track lifts, a flex trace cracks, or an FPC pad peels during rework and you need continuity back without rebuilding the board. This listing covers what the paste does, where it fits on your bench, and what you receive in the pack.
What the Paste Does on the Board
Liquid jump wire paste carries current across a gap. You lay a thin line from one good contact point to the next, and the dried line acts as the jumper. 2UUL positions the SC95 LQ for jumper work on mobile phone and laptop motherboards and for phone screen flex cables. The brand lists iPhone screen line faults, such as green and yellow screen circuits, as a target repair. Those display problem cases often trace back to a broken micro line on the flex or on the board side of the connector, where a conventional wire jumper is too thick to sit cleanly. A thin paste line takes less vertical space than a wire, which matters under a connector or beside a shield can. The included jump wire tool gives you a controlled way to place the paste instead of freehanding it from the container.
Where It Fits in Your Repair Workflow
Diagnosis comes first. Check the suspect trace with a multimeter in continuity mode, then use a microscope to locate the exact break and the two good points on either side. Clean both contacts, clamp the board in a PCB holder so it cannot shift, and place the paste between the verified points in one steady pass. Check continuity again before you assemble anything, then power the board or test the display to confirm the fault is gone. This sequence turns a vague hardware fault into a measured repair, and it protects you from blaming a good IC for a broken trace.
You will use it most after other work has damaged a contact. A pad lifts during hot air rework, a flex trace tears when you separate a screen, or a test point peels while you hold an ISP pinout probe on a dead phone. Jumper lagana with solid wire still suits power paths that carry heavy current, so keep a soldering station and fine wire on the bench for those. Reserve the paste for fine signal lines and delicate flex contacts where a wire cannot fit.
Pair it with the rest of your rework kit. Reballing kits, a hot air station and a test box all create or reveal trace damage, and a bottle of conductive paste gives you a way to recover from it on the same job instead of sending the board back to the customer unfixed.
Pack Contents and Buying Notes
Each unit holds 2 g net paste, and the packed unit weighs 7.7 g gross with packaging dimensions of 110 x 60 x 11 mm. The jump wire tool comes in the pack. The small size suits single-bench use, and shops that run screen line repairs every week usually stock several units so a job never waits on supplies. Mechanicpk supplies the 2UUL SC95 LQ to repair shops, service centers and training institutes across Pakistan. Match it with the multimeters, microscopes and PCB holders in our catalog, and upgrade your rework setup with a hot air station when your volume grows.
| Weight | 0.10 kg |
|---|
Key Features
- ✓Liquid conductive silver paste format for jump wire work
- ✓Replaces thin wire jumpers on broken traces and flex lines
- ✓Suited to mobile phone and laptop motherboard repair
- ✓Targets iPhone screen line faults such as green and yellow screen
- ✓Supports FPC connector jump wire repair
- ✓Includes a jump wire tool in the pack
- ✓Compact 2 g net unit for bench use
- ✓Made from materials the supplier lists as meeting environmental standards
Specifications
| Brand | 2UUL |
|---|---|
| Model | SC95 LQ |
| Category | Mobile Repair Accessories – Conductive Silver Paste |
| Compatibility | Mobile phone and laptop/PC motherboards, phone screen flex cables, FPC connectors (universal, not device-specific) |
| Weight | 2 g net (7.7 g gross) |
| Dimensions | 110 x 60 x 11 mm (packaging) |
Common Repair Uses
- ✓Jumper and trace repair on boards and flex cables
- ✓Jump wire repair on mobile phone motherboards
- ✓Jump wire repair on laptop and PC motherboards
- ✓Screen line repair on iPhone displays (green/yellow screen circuits)
- ✓Screen flex cable trace repair
- ✓FPC connector jump wire repair
Compatible Devices
- ✓Universal jumper-repair scope, not limited to one brand or chipset family
- ✓iPhone screen flex lines (green/yellow screen line faults)
- ✓Mobile phone motherboards
- ✓Laptop and PC motherboards
- ✓Phone screen flex cables
- ✓FPC connector contacts
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can this silver paste fix green or yellow screen line problems on iPhone?
Does the 2UUL SC95 LQ include a tool for applying the paste?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



