2UUL SC95 LQ Wire Conductive Silver Paste
2UUL SC95 LQ Conductive Silver Paste Jump Wire Original price was: ₨ 1,600.Current price is: ₨ 1,450.
Back to products

2UUL BT03 FPC Battery Connector for iPhone 6-16 Pro Max

₨ 1,800

2UUL BT03 Battery FPC Connector

The 2UUL BT03 FPC battery connector gives you a flexible, buckle-on link to the battery terminal of iPhone boards from the iPhone 6 up to the iPhone 16 Pro Max. 2UUL builds it on a soft flexible printed circuit design, so it seats snugly and resists loosening while you work. It also suits technicians who need one connector across many iPhone generations. You skip the soldering step, clip it on, and test the board. Use it for bench power-up, charging issue checks, and dead phone diagnosis. Mechanicpk supplies it to repair shops, service centers, and individual technicians across Pakistan.

In stock

13 People watching this product now!
Description

2UUL BT03 FPC Battery Connector: Flexible Power Link for iPhone Boards

The 2UUL BT03 FPC battery connector gives you a flexible, buckle-on link to the battery terminal on iPhone motherboards from the iPhone 6 through the iPhone 16 Pro Max. 2UUL builds it around a soft flexible printed circuit, so the connector bends with the board instead of fighting it. A Pakistani repair bench sees old and new iPhones side by side every day, and one connector that spans that range replaces a drawer of model-specific pieces. You clip it on, run your test, and move to the next board.

Key Technical Highlights

The BT03 uses a flexible FPC design that 2UUL describes as easy to use, snug in fit, and resistant to loosening. The soft circuit lets the connector seat against the board socket and hold its position while you work. Coverage runs from the iPhone 6 and 6 Plus through the 6s, 7, 8, X, XS, XS Max, XR, 11, 12, 13, 14, 15, and 16 families, including Plus, Pro, and Pro Max variants. The unit weighs 1.3 g net and arrives in a 70 x 85 x 11 mm pack.

Because the BT03 buckles on, you skip the soldering step that other battery connectors demand. That matters when you work on a dead phone and want to keep heat away from the board until you know the fault.

Check your exact model against the compatibility list below before you order. The range is broad, and a clear model check keeps your bench free of returns.

Where It Fits in Your Repair Workflow

Every iPhone board-level repair starts with one question: does the board power up and draw sensible current? The BT03 sits at the start of that chain. You connect it to the battery terminal, pair it with your bench power source, and watch what the board does. A phone with a charging issue, a hang on logo, or a boot loop issue behaves differently on bench power than on a tired battery, so the BT03 gives you a clean baseline for every diagnosis.

Build the rest of your bench around it. A multimeter confirms the battery line voltage, a microscope shows pad and socket damage, and a PCB holder keeps the board steady when you run a jumper or reflow a nearby part. If the fault turns out to be a damaged battery socket, your soldering station and hot air station handle the replacement, and a reballing kit covers deeper IC work. Test boxes and ISP pinout tools complete the wider diagnosis set when the hardware fault points further into the board. Technicians who stock an iPhone battery FPC connector alongside these tools finish more boards per day.

BT03 Versus the Other 2UUL Battery Connectors

2UUL sells several battery connectors, and choosing the right one saves you a return. The BT03 targets iPhone boards from the 6 to the 16 Pro Max with a soft FPC buckle. The BT02 uses a double-sided buckle for iPhone 8 to 15 and some Android models, and it needs welding to install. The PW06 19-in-1 buckle covers Android brands such as Huawei, Samsung, Xiaomi, Vivo, and Oppo. If your bench lives on iPhone work and you want no soldering, the 2UUL BT03 FPC battery connector matches the job.

Repair shops, service centers, and training institutes all gain the same thing: a connector that behaves the same way across generations, so a junior technician learns one procedure and applies it to every board. Add it to your battery-connector range at Mechanicpk and keep your test routine consistent from the iPhone 6 to the iPhone 16 Pro Max.

Additional information
Weight0.3 kg
Q & A
Please login to post questions

Key Features

  • Soft flexible FPC design that follows the board connector
  • Buckle-on installation with no soldering step
  • Snug fit built to resist loosening during testing
  • Coverage from iPhone 6 to iPhone 16 Pro Max
  • Lightweight 1.3 g body for easy bench handling
  • Compact 70 x 85 x 11 mm package for drawer or kit storage
  • Fits Plus, Pro, Pro Max, and Mini iPhone variants in the supported range
  • Single connector for a mixed old and new iPhone workload

Specifications

Brand2UUL
ModelBT03
CategoryBattery FPC Connector
CompatibilityApple iPhone 6 to iPhone 16 Pro Max
Supported DevicesiPhone 6, 6 Plus, 6s, 6s Plus, 7, 7 Plus, 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max, 12 Mini, 12, 12 Pro, 12 Pro Max, 13 Mini, 13, 13 Pro, 13 Pro Max, 14, 14 Plus, 14 Pro, 14 Pro Max, 15, 15 Plus, 15 Pro, 15 Pro Max, 16, 16 Plus, 16 Pro, 16 Pro Max
TechnologySoft flexible printed circuit (FPC) buckle design
DimensionsPackage size 70 x 85 x 11 mm
Weight1.3 g net (5 g gross)

Common Repair Uses

  • Battery-terminal connection during iPhone motherboard testing and repair
  • Booting an iPhone motherboard on the bench
  • Battery activation work on iPhone boards
  • Powering a board through the battery terminal during diagnosis
  • Checking a dead phone board for power behavior
  • Isolating a charging issue at the battery line
  • Re-testing a board after battery socket repair
  • Board-level diagnosis alongside multimeter measurements
  • Repeat testing across multiple iPhone generations on one bench

Compatible Devices

  • Devices: Apple iPhone series, iPhone 6 through iPhone 16 Pro Max
  • iPhone 6, 6 Plus, 6s, 6s Plus
  • iPhone 7, 7 Plus, 8, 8 Plus
  • iPhone X, XS, XS Max, XR
  • iPhone 11, 11 Pro, 11 Pro Max
  • iPhone 12 Mini, 12, 12 Pro, 12 Pro Max
  • iPhone 13 Mini, 13, 13 Pro, 13 Pro Max
  • iPhone 14, 14 Plus, 14 Pro, 14 Pro Max
  • iPhone 15, 15 Plus, 15 Pro, 15 Pro Max, 16, 16 Plus, 16 Pro, 16 Pro Max

FAQ

What is the product name?
The product name is 2UUL BT03 Phone Series FPC Battery Connector for Phone 6-16PM.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is BT03.
What is this product used for?
This product connects to the battery terminal of an iPhone motherboard for booting, activation, and repair testing.
Which devices are compatible with this product?
This product is compatible with Apple iPhone models from the iPhone 6 to the iPhone 16 Pro Max, including Plus, Pro, Pro Max, and Mini variants.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the 2UUL BT03 need soldering to install?
No. The BT03 is a buckle-on flexible FPC connector, so you clip it onto the board connector and use it without soldering.
What is the difference between the 2UUL BT03 and the 2UUL BT02?
The BT03 is a soft FPC connector for iPhone 6 to 16 Pro Max. The BT02 is a double-sided connector for iPhone 8 to 15 and some Android models, and it needs welding to install.