Qianli Bumblebee Stencil (QS18) MTK CPU4 BGA Reballing
₨ 600
MTK CPU4 Reballing Stencil by Qianli
The Qianli Bumblebee Stencil (QS18) MTK CPU4 gives you a dedicated MTK CPU4 reballing stencil for MediaTek processor repair. It covers the MT6885Z, MT6795W, MT6797W and MT6755 packages in one template, so your bench handles several MediaTek CPU layouts without extra plates. The 0.12 mm square-hole, round-angle design suits technicians who reball a CPU after lifting it for cleaning, replacement, or reflow work on a dead phone or a hardware fault board. Pair it with your hot air station, soldering station, and PCB holder for a clean, repeatable reballing routine.
In stock
Qianli Bumblebee Stencil (QS18) MTK CPU4: Precision Reballing for MediaTek CPUs
The Qianli Bumblebee Stencil (QS18) MTK CPU4 serves as an MTK CPU4 reballing stencil for technicians who rebuild solder balls on MediaTek processor packages. Qianli groups the MT6885Z, MT6795W, MT6797W and MT6755 under one stencil, so a single template covers several MediaTek CPU layouts on your repair bench. When a CPU comes off a dead phone, a boot loop issue board, or a hang on logo case, a clean reball decides whether the chip seats properly on its second reflow. This stencil gives you that control at the pad level.
Chipset Coverage Inside the MTK CPU4 Group
The QS18 targets the MTK CPU4 group, which lists MT6885Z in A and B variants, MT6795W in A and B variants, MT6797W, and MT6755. Distributor listings link the stencil to the Dimensity 1000L MT6885, the Helio X10 MT6795W, and the Helio X25 MT6797W. Read the marking on the CPU before you order and match it against this list, because a stencil only works when its aperture pattern matches the package. The QS18 handles CPU packages only. For storage chips, you need a separate eMMC or UFS stencil from the Bumblebee range, and you can browse those under Reballing Kits and UFS Adapters on Mechanicpk.
Stencil Construction and Reballing Precision
Qianli builds the QS18 as a square-hole, round-angle BGA stencil in the Bumblebee series, with a thickness of 0.12 mm. The square apertures with rounded corners mark every pad position for paste or solder ball placement, which keeps your ball pattern aligned with the CPU footprint. Distributors describe the stencil as sturdy and durable over repeated use. Clean the plate with flux remover after each job and store it flat, so the apertures stay clear for your next reball.
Where the QS18 Fits in Your Reballing Workflow
Start by lifting the CPU with a hot air station set to your board’s rework profile, then clean the pads with a soldering station, flux, and desoldering wick. Clamp the board in a PCB holder and inspect the pads under a microscope, so you catch lifted pads before you apply paste. Align the QS18 over the pads, apply paste or place balls, reflow, and lift the stencil off the package. Once the CPU seats back on the board, check continuity with a multimeter and run the board through a test box or flash tool before you close the phone. This routine suits charging issue, display problem, network issue, and dead after flash boards where the CPU needs a reball or replacement.
Workshops that handle MediaTek boards every day get the most from stocking the QS18 beside the other Qianli MediaTek stencils. Qianli lists the QS15 (MTK CPU1), QS16 (MTK CPU2) and QS17 (MTK CPU3) for other MediaTek packages, so you move to the right plate as soon as you read the chip marking. As your volume grows, step up from single stencils to a complete reballing kit and a Hot Air Stations upgrade to keep your reflow repeatable across jobs.
| Weight | 0.14 kg |
|---|
Key Features
- ✓Dedicated MTK CPU4 stencil in the Qianli Bumblebee series
- ✓Covers MT6885Z (A and B), MT6795W (A and B), MT6797W and MT6755 in one plate
- ✓Square-hole, round-angle BGA aperture design
- ✓0.12 mm stencil thickness
- ✓Sturdy build that holds up over repeated reballing jobs
- ✓Reusable after cleaning with flux remover
- ✓Fits CPU-level rework alongside hot air stations and soldering stations
- ✓Works with PCB holders and microscopes for aligned, inspected reballing
Specifications
| Brand Entity | Qianli (Bumblebee series) |
|---|---|
| Product Entity | Qianli Bumblebee Stencil QS18 MTK CPU4 BGA reballing stencil |
| Technology Entity | BGA reballing, square-hole round-angle stencil, 0.12 mm thickness |
| Compatible Device Entities | MediaTek MT6885Z, MT6795W, MT6797W, MT6755, Dimensity 1000L, Helio X10, Helio X25 |
| Repair Process Entity | CPU reballing, PCB rework, hot air reflow, pad cleaning |
| Industry Entity | Mobile phone repair, GSM hardware repair, PCB repair Pakistan |
Common Repair Uses
- ✓CPU-level reballing and rework on MediaTek boards
- ✓Reballing a MediaTek CPU after removal with a hot air station
- ✓Restoring solder balls after cleaning a lifted CPU
- ✓Preparing a replacement CPU before it goes onto the board
- ✓Reflow rework on a dead phone board with a suspected CPU joint fault
- ✓CPU rework on boot loop issue and hang on logo boards
- ✓Reball jobs after a failed or interrupted CPU reflow
- ✓Pad alignment and ball placement under a microscope
- ✓Daily MediaTek CPU rework in repair shops and service centers
Compatible Devices
- ✓MediaTek CPU packages in the MTK CPU4 group (chipset-family scope, not device-model specific)
- ✓MediaTek MT6885Z A (Dimensity 1000L)
- ✓MediaTek MT6885Z B
- ✓MediaTek MT6795W A (Helio X10)
- ✓MediaTek MT6795W B
- ✓MediaTek MT6797W (Helio X25)
- ✓MediaTek MT6755
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which MediaTek chips does the Qianli QS18 stencil support?
Can the QS18 stencil reball eMMC or UFS chips?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock


