2UUL SA12 Screen Sealing Adhesive for iP12 (5pcs/Pack)
₨ 900
iPhone 12 Screen Sealing Adhesive
The 2UUL SA12 Screen Sealing Adhesive for iP12 (5pcs/Pack) gives your bench a pre-cut, double-sided iPhone 12 screen sealing adhesive for closing the display frame after a screen replacement. Each pack holds five pieces, so you reseal five phones without trimming tape by hand. The adhesive measures 145 x 70 x 0.5 mm and bonds the new display to the frame with strong, lasting adhesion when you clean the frame first and press it with heat. Mechanicpk supplies the pack to technicians, repair shops, and service centers across Pakistan.
In stock
iPhone 12 Screen Sealing Adhesive for Clean, Repeatable Frame Seals
The 2UUL SA12 Screen Sealing Adhesive for iP12 (5pcs/Pack) is a pre-cut, double-sided iPhone 12 screen sealing adhesive that closes the display frame after every screen replacement. You get five ready-to-fit pieces in one pack, so your bench skips hand-cut tape and the uneven edges that come with it. Mechanicpk stocks the SA12 for Pakistani technicians, repair shops, and service centers that handle iPhone 12 display jobs every week and need the same bond quality on job one and job fifty.
Where the Adhesive Fits in the iPhone 12 Screen Replacement Workflow
A screen job on an iPhone 12 follows a fixed sequence: heat and separate the old display, clear the frame, test the new panel, then seal and close. The 2UUL SA12 handles the last step. You lay the pre-cut film on the cleaned housing, and it holds the new display assembly against the frame with strong, long-lasting adhesion. That bond keeps the original screen fit, which matters on a phone customers expect to feel like it left the factory.
Prep decides how well the film grips. Scrape old adhesive and glue residue off the frame, then check the housing for bends under a microscope or a bright magnifier lamp. A deformed frame lifts the new film no matter how good the tape is. Test display, touch, and Face ID before you seal, because opening a sealed screen to chase a display problem wastes a film. A multimeter or a test box on the bench catches a charging issue or a hardware fault early, so you seal only once.
The SA12 sits on the consumables side of your workflow. Hot air stations, soldering stations, and PCB holders handle the board, and the adhesive handles the housing. When a simple screen swap turns into a dead phone that needs board-level work, reballing kits and eMMC programmers take over, and the SA12 waits for the final close.
Applying the iPhone 12 Frame Adhesive With a Heat Press
2UUL specifies a simple method for its SA series. Clean the iPhone frame and inspect it for deformation, apply the sealing tape to the frame, then press it with a 2UUL DA07 Mini Hot Press Station or another heating pressure press. Heat pressing bonds the film around the bezel and restores airtightness at the frame edge. Technicians who work through iPhone 12 volume often pair the film with the 2UUL DA62 sealant thermal press plate, which positions the adhesive around the screen frame for the iPhone 12 series.
Handle each piece by its edges and line it up against the frame contour before you press, because a pre-cut shape only seals when it sits true. The film measures 145 x 70 x 0.5 mm, a thin profile that suits the tight gap between display and housing. Each pack contains five pieces, which covers a busy week of iPhone 12 jobs and leaves spare film for a misplaced seal.
Why Shops Stock Pre-Cut iPhone 12 Screen Sealing Tape
Pre-cut film removes the slowest part of a reseal: measuring and trimming tape on the bench. A technician who cuts tape by hand loses minutes per phone and risks gaps at the corners, and a shop that runs a dozen iPhone 12 screens a week feels that loss. This iPhone 12 screen sealing adhesive gives you the same shape on every job, so your output stays predictable and your customers get a clean finish.
The five-piece pack also matches how Pakistani workshops buy. You keep a few packs next to your separator and press, and you reorder before the shelf runs low. 2UUL positions the SA12 for professional technicians, and Mechanicpk lists the tools around this job, including microscopes, soldering stations, hot air stations, multimeters, and PCB holders, so you can build a full iPhone repair bench from one catalogue. If you stock other iPhone generations, check the model printed on each pack before you order.
| Weight | 0.10 kg |
|---|
Key Features
- ✓Pre-cut, double-sided adhesive for iPhone 12 screen frames
- ✓Strong, long-lasting adhesion between display and frame
- ✓Helps maintain the original screen fit
- ✓Heat-press method restores airtightness at the frame edge
- ✓Thin 0.5 mm film profile
- ✓Five pieces per pack
- ✓No hand cutting or trimming on the bench
- ✓Built for professional technicians and repair shops
Specifications
| Brand | 2UUL |
|---|---|
| Model | SA12 |
| Category | Screen Sealing Adhesive |
| Compatibility | Apple iPhone 12 |
| Supported Devices | iPhone 12 |
| Technology | Pre-cut, double-sided adhesive |
| Dimensions | 145 x 70 x 0.5 mm |
| Pack Quantity | 5 pieces |
| Packaging Dimensions | 260 x 104 x 3.5 mm |
Common Repair Uses
- ✓Sealing the display frame during iPhone 12 screen work
- ✓Resealing the front display to the frame after LCD or OLED screen replacement
- ✓Replacing worn or damaged frame adhesive after you clean the housing
- ✓Closing the screen after a display problem repair
- ✓Resealing after a Face ID or front-module repair
- ✓Resealing the screen after opening the phone for a battery or charging issue repair
- ✓Closing the display after board-level hardware fault work
- ✓Heat-press resealing with a hot press station or press plate
- ✓Restocking a repair shop’s iPhone 12 screen consumables
Compatible Devices
- ✓Apple iPhone 12 (screen frame sealing)
- ✓iPhone 12
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the 2UUL SA12 need a heat press after you apply it?
How do I prepare an iPhone 12 frame before applying the SA12?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



