Koocu V900 Soldering Iron (Yellow) 200–480°C
₨ 600
Koocu V900 Soldering Iron, Yellow
The Koocu V900 soldering iron brings rotary temperature control from 200 to 480°C to your repair bench in a light 85 g pencil body. A two-core ceramic heating element holds ±2°C stability in still air, and a three-core grounding wire keeps tip-to-ground impedance below 2Ω. You get a dependable second iron for charging port pads, battery connectors, jumper wires, and general mainboard rework. The yellow handpiece stands out on a crowded bench. It runs on 220V AC at 50Hz, so it plugs straight into standard workshop supply. Pair it with a hot air station and microscope for full board-level work.
Out of stock
Koocu V900 Soldering Iron for Mobile Repair Benches
The Koocu V900 soldering iron gives you a pencil-style, temperature-controlled iron that covers 200 to 480°C through a rotary dial. A two-core ceramic heating element drives the tip, and a three-core grounding wire references the tip to earth. The handpiece weighs about 85 g and the grip measures 130 mm, so your hand stays steady through a long day of board work. The yellow version suits shops that colour-code stations or keep a spare iron at every workstation.
Heating Core and Temperature Control
The ceramic heating element brings the tip up to working temperature quickly, and the built-in thermostatic circuit holds ±2°C stability in still air with no load. Accuracy sits at ±10°C, so you should check the tip with your own thermometer when you work near a component’s thermal limit. The dial sets any target between 200 and 480°C. That span covers leaded solder, common lead-free alloys, and the extra heat that large ground-plane pads demand. A blue LED indicator shows the control status, so you see when the element regulates.
Grounding and Board Safety
Tip-to-ground impedance stays below 2Ω and tip-to-ground voltage stays below 2mV. Those figures matter when you touch ICs and connectors on a mainboard, because leakage from an ungrounded tip damages sensitive components. The three-core cable ties the tip to mains earth, so plug the iron into a properly earthed socket to keep that protection working. The iron takes 220V AC ±10% at 50Hz, which matches standard Pakistani mains supply.
Where It Fits in Your Repair Workflow
Reach for the V900 when hot air is overkill: charging port pads, battery connector pads, flex connector re-tinning, jumper wires on broken tracks, and small through-hole parts. Hardware fault diagnosis often ends with a single clean joint, and this iron handles that joint without setting up a full rework station. For IC change karna and BGA work, keep a hot air station and reballing kit beside it. A microscope helps you see fine pads, a PCB holder keeps the board still, and a multimeter confirms continuity after every joint. The iron accepts replaceable 900M-series style tips, so you swap between knife, pointed, and bent shapes to match the pad size.
Choosing the V900 Within Your Soldering Line-Up
The V900 is a mains-powered pencil iron, not a cartridge-style soldering station. Cartridge systems built on C210 and C245 tips heat and recover faster under heavy load. The V900 earns its place as the first iron for a new technician or the reliable spare beside a main soldering station. It relies on a rotary dial and LED indicator rather than a digital display, so you set the dial by feel and confirm the tip with a thermometer when precision counts. Technicians who outgrow it move up to a full soldering station without changing their pad-level habits.
| Weight | 0.15 kg |
|---|
Key Features
- ✓Rotary temperature control from 200 to 480°C
- ✓Two-core ceramic heating element for fast heat-up
- ✓±2°C temperature stability in still air with no load
- ✓Tip-to-ground impedance below 2Ω and voltage below 2mV
- ✓Three-core grounding wire for electrical safety
- ✓Blue LED indicator shows temperature control status
- ✓Light 85 g handpiece with 130 mm grip
- ✓Replaceable tips in 900M-series style shapes
Specifications
| Brand | Koocu |
|---|---|
| Model | V900 |
| Category | Soldering Iron |
| Compatibility | 220V AC mains; replaceable 900M-series style tips |
| Technology | Two-core ceramic heating element with rotary temperature control and thermostatic circuit |
| Temperature Range | 200–480°C |
| Temperature Stability | ±2°C (still air, no load) |
| Temperature Accuracy | ±10°C |
| Tip-to-Ground Impedance | Below 2Ω |
| Tip-to-Ground Voltage | Below 2mV |
| Input Voltage | 220V AC ±10%, 50Hz |
| Dimensions | Handgrip length 130 mm |
| Weight | Approx. 85 g |
Common Repair Uses
- ✓Pad-level and connector-level soldering on mobile phone boards and small electronics
- ✓Charging port pad re-soldering for charging issue repairs
- ✓Battery connector pad repair
- ✓Flex connector re-tinning
- ✓Jumper lagana on broken tracks
- ✓Removing and fitting small through-hole parts
- ✓Cleaning excess solder from pads
- ✓Tinning wires and test leads
- ✓General PCB repair and rework
Compatible Devices
- ✓Universal — not device-specific; works on any board whose pads and components suit pencil-iron soldering
- ✓Smartphone mainboards (Android and iPhone)
- ✓Feature phone boards
- ✓Tablet boards
- ✓Charging port and charging sub-boards
- ✓Battery connector pads
- ✓Flex connector pads
- ✓Small consumer electronics PCBs
- ✓Through-hole components on repair boards
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What temperature range does the Koocu V900 cover, and does it suit lead-free solder?
Is the Koocu V900 grounded for safe work on mobile phone boards?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



