Magma C245-I Soldering Iron Tip Straight Conical

₨ 1,200

Precision C245 Straight Conical Tip

The Magma C245-I soldering tip is a Type I straight conical tip for fine service work on mobile phone boards. Its slim profile reaches tight spaces between shielding cans, connectors and small SMD components, so you can solder precisely without disturbing neighbouring parts. It follows the C245 standard and fits soldering irons and stations that support the C245 system. Use it for IC change karna, jumper lagana, charging port pad repair and other hardware fault jobs on dense PCBs. Each pack contains one Magma C245-I tip, ready for your repair bench.

In stock

18 People watching this product now!
Description

Magma C245-I Soldering Tip for Fine-Pitch PCB Rework

The Magma C245-I soldering tip is a Type I straight conical tip made for precise service work on small electronic components. It follows the C245 standard, so it fits soldering irons and stations that support the C245 system. The slim tip reaches hard-to-access areas on the PCB, which matters on modern phone boards where components sit close together. If you handle hardware faults on dense boards every day, this tip gives you a small, controlled contact point.

Conical Geometry for Tight Board Layouts

A straight conical tip narrows to a fine point, and that shape gives you control over where the heat lands. On a phone motherboard, you often work between shielding cans, flex connectors and passive components with very little clearance. The slim Magma C245-I fits into those gaps without bumping nearby parts. You place solder on a single pad, touch up a lifted joint or re-tin a small trace, and the surrounding area stays clean. The straight orientation keeps the tip in line with the handpiece, so you judge angle and position by eye while you work under a microscope.

Fit Within the C245 Tip System

The C245 standard gives you a defined tip format that you can swap across compatible irons and stations. Magma lists the C245-I for soldering irons and stations that support the C245 system, so you check your handpiece against that standard before you buy. If your bench already runs a C245 station, you add this tip to your existing setup and change it when a job calls for a finer point. Keep a Type I tip next to your wider tips and you cover both fine-pitch SMD work and general soldering without changing your station.

Where It Fits in Your Repair Workflow

You reach for this tip during board-level repair, after you diagnose the fault with a multimeter and inspect the area under a microscope. Typical jobs include cleaning and tinning small pads, soldering jumper wires across broken tracks, resoldering charging port and connector pads, and touching up joints after IC change karna. It also supports small-component replacement on boards that show a charging issue, display problem or network issue caused by a damaged pad. For reballing and large-IC rework, you pair the tip with a hot air station and a reballing kit, then use the Magma C245-I to clean up the finer pads afterwards. A set of PCB holders keeps the board steady while you work.

Building Your Soldering Tip Range

Match the tip to the job and you protect the board and the tip itself. The Magma C245-I covers the fine-detail end of your range. Pair it with your soldering stations, hot air stations and test boxes to cover the full repair process from diagnosis to final soldering. Technicians who run a busy workshop usually keep several tip shapes within reach, and a precision straight conical tip belongs in that set.

Additional information
Weight0.5 kg
Q & A
Please login to post questions

Key Features

  • Type I straight conical tip profile
  • Slim tip for hard-to-reach PCB areas
  • Suited to components with very small pitch
  • Follows the C245 standard
  • Fits soldering irons and stations supporting the C245 system
  • Straight alignment for easy visual control under a microscope
  • Made for precision soldering, SMD work and electronics service
  • Package contains 1 × Magma C245-I soldering tip

Specifications

BrandMagma
ModelC245-I
CategorySoldering Iron Tips
CompatibilitySoldering irons and stations supporting the C245 system
TechnologyC245 standard, Type I (straight / conical) tip

Common Repair Uses

  • Fine-pitch soldering and service work on mobile phone and electronics boards
  • Precision SMD soldering
  • Jumper lagana on broken tracks
  • Charging port pad resoldering
  • Connector pad cleanup and tinning
  • Touch-up after IC change karna
  • Soldering in tight spaces between shielding cans
  • Small passive component replacement
  • Service and training bench soldering

Compatible Devices

  • Universal C245 tip — works with C245-compatible soldering irons and stations; it is not tied to specific phone models, so it serves phone, tablet and general electronics boards
  • C245-compatible soldering irons
  • C245-compatible soldering stations
  • Smartphone motherboards (Samsung, Oppo, Vivo, Infinix, Tecno, iPhone and other brands)
  • Tablet motherboards
  • Laptop and small-device PCBs
  • Charging port and connector pads
  • SMD component pads on general electronics
  • Service and training bench setups

FAQ

What is the product name?
The product name is Magma C245-I Soldering Iron Tip (Straight).
What is the brand of this product?
The brand of this product is Magma.
What is the model of this product?
The model of this product is C245-I.
What is this product used for?
This product is used for precision soldering, SMD component work and electronics service, including tight areas on mobile phone PCBs.
Which devices are compatible with this product?
This product is compatible with soldering irons and stations that support the C245 system.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Is the Magma C245-I a straight or bent tip?
The Magma C245-I is a Type I straight conical tip. For a bent version, look at the Magma C245-IS, which has a curved tip.
Will the Magma C245-I fit my soldering station?
It fits soldering irons and stations that support the C245 system. Check that your handpiece or station uses the C245 tip standard before you order.