Magma C245 Curved Soldering Iron Tip

₨ 1,200

Curved C245 Tip for Phone Board Work

The Magma C245 curved soldering iron tip gives you angled access to crowded smartphone motherboards. The curved profile keeps the contact point in your line of sight while the handle stays clear of shield frames, connectors, and neighbouring ICs. It follows the C245 standard, so it fits soldering irons and stations that support the C245 system. Use it for precision SMD soldering, motherboard repair, and GSM service work on charging issue boards and dead phone jobs. Each pack contains one Magma tip and a protective box for storage between repairs.

In stock

17 People watching this product now!
Description

C245 Curved Soldering Iron Tip Built for Precision Board Work

The C245 curved soldering iron tip from Magma solves a specific problem on the repair bench: reaching pads that a straight tip blocks from view. Magma builds this tip to the C245 standard and gives it a slim, curved profile for precision soldering of small electronic components. You get a clearer view of the solder point and tighter control over how much solder you place, which matters on dense smartphone boards. Mechanicpk supplies it for technicians who already run a C245-system iron or station and want to widen their tip range without replacing equipment. Whether you repair phones daily or run a service center, this tip adds a reach-and-visibility option that a straight tip cannot match.

Where the Curved Geometry Pays Off

A curved tip changes the angle between your handle and the board. On a crowded motherboard, a straight tip forces you to tilt the whole iron, and the handle ends up hiding the joint you want to see. The curve lifts the handle away from the work and keeps the contact point visible. That visibility helps most around tall shield frames, flex connectors, and small passive parts packed beside an IC. When you solder fine SMD components, you place less solder, you watch the pad wet, and you correct a joint before it bridges. Magma positions this tip for precision service work, motherboard repair, and soldering in hard-to-reach places, and the geometry matches each of those jobs.

C245 System Compatibility and Fit

Compatibility follows the system standard, not a brand match. The Magma C245 soldering tip belongs to the C245 standard, and the listing states it works with soldering irons and stations that support the C245 system. Before you order, confirm that your station or handle explicitly lists C245 support. The tip does not target specific phone models, so treat it as a universal bench accessory: it works on any board your iron can reach and your technique can handle. Each pack contains one tip and one protective box. Because you buy tips one shape at a time, you can add the curved profile beside your straight and chisel tips and swap between them as each repair demands. Keep the box for storage between jobs.

Where a Curved Soldering Tip for Mobile Repair Fits Your Workflow

In a board-level workflow, the iron tip works at the finishing stage. You diagnose the fault with a multimeter, lift the faulty part with a hot air station, clean the pads, and then place and fix the new component with a fine tip. This curved soldering tip for mobile repair serves that last stage on jobs such as IC change karna, charging port and connector joints, and jumper lagana on damaged tracks. It also suits touch-up work after reflow, when one joint needs a fresh contact. Pair it with a microscope and a PCB holder so the board stays steady while you control solder volume. If you handle dead phone boards or a charging issue that traces back to a weak joint, a visible, reachable contact point shortens the repair. As your bench grows, expand with soldering stations, reballing kits, and test boxes from Mechanicpk so every stage of the workflow has the right tool. Keep a straight tip for open areas and this curved tip for tight ones, and your station covers both without delay.

Additional information
Weight0.5 kg
Q & A
Please login to post questions

Key Features

  • Curved tip profile for angled board access
  • Slim tip for fine SMD work
  • Built to the C245 standard
  • Clear view of the solder point in tight spaces
  • Tighter control over solder amount
  • Suits motherboard and GSM service repair
  • Protective box included
  • One tip per pack, so you add shapes as needed

Specifications

BrandMagma
ModelC245 Curved
CategorySoldering Iron Tips
CompatibilitySoldering irons and stations supporting the C245 system
TechnologyC245 standard, curved tip profile

Common Repair Uses

  • Precision hand soldering and rework on mobile phone and consumer electronics boards.
  • Precision soldering of SMD components
  • Soldering in hard-to-reach places
  • Motherboard repair
  • Consumer electronics repair
  • GSM and microelectronics service
  • Pad and joint touch-up after IC change karna
  • Jumper lagana on damaged board tracks
  • Charging port and connector joint repair

Compatible Devices

  • Universal β€” not device-specific. Works with C245-system soldering equipment and general electronics boards.
  • Soldering irons that support the C245 system
  • Soldering stations that support the C245 system
  • Professional electronics repair shop stations built on the C245 standard
  • GSM and microelectronics service workstations using the C245 system
  • Smartphone motherboards (universal, not device-specific)
  • Consumer electronics motherboards
  • SMD components on microelectronics boards
  • Hard-to-reach joints on compact PCBs

FAQ

What is the product name?
The product name is Magma C245 Curved Soldering Iron Tip.
What is the brand of this product?
The brand of this product is Magma.
What is the model of this product?
The model of this product is C245 Curved.
What is this product used for?
This product is used for precision SMD soldering, motherboard repair, and soldering in hard-to-reach places.
Which devices are compatible with this product?
This product is compatible with soldering irons and stations that support the C245 system. It is not tied to specific phone models.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Will this curved tip fit my soldering station?
It fits soldering irons and stations that support the C245 system. Check that your handle or station lists C245 support before you order.
Is a curved C245 tip good for SMD soldering on phone motherboards?
Yes. The slim, curved profile suits precision soldering of small SMD components and gives you better access and visibility in tight areas of a motherboard.