RELIFE RL-601R 10 in 1 Middle Frame Reballing Kit
₨ 7,999
Middle Frame Reballing Platform for iPhone X to 12 Pro Max
The RELIFE RL-601R 10 in 1 Middle Frame Reballing Kit For iPhone X-12 Pro Max gives your bench one magnetic platform for ten iPhone models. The kit includes one fixture, eight middle stencils, and one SIM tin cover. Imported steel stencils with round and square holes help you form even tin balls on stacked logic boards. A built-in high-temperature magnet keeps each stencil locked in place while you heat the board. If you separate layered iPhone boards and rebuild the solder joints, this RELIFE RL-601R reballing kit keeps your pad alignment repeatable from the first board to the last.
In stock
RELIFE RL-601R Reballing Kit for Layered iPhone Boards
The RELIFE RL-601R reballing kit gives your bench one magnetic platform for the stacked logic boards inside iPhone X through iPhone 12 Pro Max. The RELIFE RL-601R 10 in 1 Middle Frame Reballing Kit For iPhone X-12 Pro Max packs one fixture, eight middle stencils, and one SIM tin cover, and together they cover ten iPhone models. Layered iPhone boards join through rows of solder balls, and a cracked or lifted joint there turns a drop into a dead phone, a boot loop issue, or a charging issue. This kit holds the stencil flat and aligned while you lay fresh tin, so the middle layer goes back together on clean, even pads.
Stencil Build and Magnetic Hold
Every stencil in the set uses imported steel, and the apertures combine round and square holes. That mix helps the tin form rounder balls and keeps the mesh from grabbing the balls when you lift the stencil away. A built-in high-temperature magnet pulls the stencil onto the fixture and keeps its hold under heat, which matters when you work with hot air at close range. A stencil that slides during heating disturbs a whole row of pads, so the magnetic grip protects your time as much as your board. The fixture uses a single-sided design that serves all ten models, so you never swap between separate holders for each phone. The kit lists one fixture, eight middle stencils, and one SIM tin cover, which makes up the 10 in 1 count, and the SIM tin cover handles the SIM tin area on its own.
Position in Your Reballing Workflow
The RL-601R sits in the middle of a board-level iPhone repair. You separate the stacked boards with a hot air station, clear old solder with a soldering station, and clean the pads under a microscope. Next you seat the middle board on the fixture, set the matching stencil on top, spread paste through the apertures, and apply heat until the balls form. Lift the stencil, inspect the pads, and rejoin the boards. A multimeter in continuity or diode mode confirms your connections before you close the phone, and a PCB holder keeps the rest of the board steady during cleaning. Every step before the fixture decides how clean the result looks, so rework the pads until they sit flat and bright. The wider Reballing Kits category carries the CPU and IC stencils for the chips on the same boards, so you can finish a complete board-level job from one product family.
Buying Decision for Pakistani Repair Shops
A busy workshop sees iPhone X, XS, 11, and 12 boards in the same week. Ten separate holders clutter your bench and slow every job, while one kit that covers ten models keeps your workflow consistent from one phone to the next. If your shop already runs hot air stations and soldering stations, this kit closes the gap for middle layer work without a machine upgrade. Technicians who start with basic pad repair can step up to full board-level reballing by adding this platform and a microscope to their setup. Shop owners get a practical way to handle hardware fault jobs in-house instead of sending stacked boards out to another bench. Check the model list before you order: the kit covers the ten phones named in the specifications, and phones outside that list need a platform made for them.
| Weight | 0.35 kg |
|---|
Key Features
- ✓10 in 1 kit: one fixture, eight middle stencils, and one SIM tin cover
- ✓Covers ten iPhone models from iPhone X to iPhone 12 Pro Max
- ✓Precise stencil positioning on the fixture
- ✓Strong magnetic adsorption holds the stencil steady
- ✓Built-in high-temperature magnet keeps its hold under heat
- ✓Imported steel stencils with round and square precision holes
- ✓Round and square holes help form rounder tin balls and reduce mesh sticking
- ✓Single-sided universal fixture design for fast tin planting
Specifications
| Brand | RELIFE |
|---|---|
| Model | RL-601R |
| Category | iPhone Middle Frame Reballing Platform |
| Compatibility | iPhone X, XS, XS Max, 11, 11 Pro, 11 Pro Max, 12, 12 Pro, 12 Pro Max, 12 Mini |
| Supported Devices | 10 iPhone models, X through 12 Pro Max |
| Material | Imported steel stencils, built-in high-temperature magnet |
Common Repair Uses
- ✓Middle frame (stacked board) reballing and tin planting on supported iPhone models
- ✓Rebuilding solder balls on separated middle frame boards
- ✓Re-tinning pads after you clear old solder
- ✓Repairing dead phone cases traced to cracked middle layer joints
- ✓Fixing charging issue and hardware fault cases traced to damaged layer connections
- ✓Tinning the SIM area with the included SIM tin cover
- ✓Reballing after hot air board separation
- ✓Batch re-tinning boards from different models on one fixture
- ✓Training bench practice for layered board reballing
Compatible Devices
- ✓Verified scope: 10 iPhone models from iPhone X to iPhone 12 Pro Max
- ✓iPhone X
- ✓iPhone XS
- ✓iPhone XS Max
- ✓iPhone 11
- ✓iPhone 11 Pro and 11 Pro Max
- ✓iPhone 12 and 12 Mini
- ✓iPhone 12 Pro
- ✓iPhone 12 Pro Max
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What comes in the RELIFE RL-601R 10 in 1 kit?
Does the RL-601R magnet hold the stencil when heated?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



