Sunshine SS T12A-N12 Heating Platform for iPhone 12
₨ 12,500
iPhone 12 Layered Heating Platform
The Sunshine SS T12A-N12 Motherboard Repair Heating Station Platform for iPhone gives your bench a dedicated heating module for the iPhone 12 family: iPhone 12, 12 mini, 12 Pro, and 12 Pro Max. It belongs to Sunshine’s T12A preheating system and works with the SS-T12A host. You place the logic board on the platform, heat it evenly, and separate the layers or lift glued chips with less risk to nearby components. Mechanicpk supplies the N12 module to Pakistani repair shops and service centers that already run the T12A host or plan to build an iPhone motherboard rework station.
In stock
iPhone 12 Motherboard Heating Platform for Layered Board Rework
The Sunshine SS T12A-N12 Motherboard Repair Heating Station Platform for iPhone is the iPhone 12 module of Sunshine’s T12A preheating system. As an iPhone 12 motherboard heating platform, it holds the stacked logic board on a shaped heating surface so you heat the board evenly before you separate layers, lift shields, or remove glued chips. Distributors list it for the iPhone 12 family: iPhone 12, 12 mini, 12 Pro, and 12 Pro Max. Sunshine builds the wider T12A range as modules, with separate platforms for the iPhone X series, 11, 13, 14, 15, and 16. Your shop buys the SS-T12A host once and adds one module per iPhone generation, so the N12 covers the iPhone 12 repairs that reach your workshop without forcing you to replace your whole setup.
Key Technical Highlights
The N12 platform targets one job: controlled, even preheating of an iPhone 12 logic board. The SS-T12A system documents a 185 °C layered process that concentrates heat on the area you need to open, and the host manages temperature control while the module carries the board. You get a stable seat for the motherboard, which matters when you hold a board at temperature and work on a chip with a hot air nozzle or a soldering iron. Sunshine lists the module as a 4-in-1 design for the iPhone 12 series, and barcode 6941590202327 helps you match the exact item when you order from a supplier. Pair the N12 with the SS-T12A host; the platform does not replace it.
Technicians who rework iPhone boards often lose time clamping and re-aligning boards on improvised fixtures. A module shaped for the iPhone 12 board gives you repeatable placement, so you load the board, bring it to temperature, and work the same way on every job. That repeatability helps a shop with several technicians keep one consistent process on the bench.
Repair Workflow Fit
An iPhone 12 logic board stacks two layers bonded with solder and adhesive. Heating that board unevenly with a loose hot air gun puts nearby components at risk and can warp the board. A heating platform supports the board from underneath, so you separate the layers and clear glue around the CPU and NAND area with less thermal shock. That control matters on the jobs Pakistani technicians see daily: a dead phone after liquid damage, a charging issue that traces back to a board-level hardware fault, a boot loop issue, or an iPhone that hangs on logo after a failed repair.
The usual sequence runs in three stages. First, you seat the board on the platform and let the host bring it to working temperature. Second, you separate the layers or lift the target chip with your hot air station. Third, you clean the pads, check continuity with your multimeter, and reball or reflow the chip. Keep a microscope and a PCB holder beside the platform, and use your reballing kit once the chip comes off clean.
Buying and Compatibility Notes
Confirm the generation before you order. The N12 matches iPhone 12 boards only; an iPhone 11 or 13 board needs the N11 or N13 module on the same host. Supplier pages list the model range as iPhone 12, 12 mini, 12 Pro, and 12 Pro Max, and Mechanicpk follows that scope. The platform suits repair shops, service centers, and training institutes that handle iPhone 12 volume. A shop that already owns the SS-T12A host gets the fastest return, because the N12 adds one more model family without a second station. Browse our Hot Air Stations, Soldering Stations, Microscopes, and Reballing Kits categories to complete the iPhone motherboard bench around this platform.
| Weight | 0.80 kg |
|---|
Key Features
- ✓Dedicated heating platform shaped for the iPhone 12 series motherboard
- ✓Module of Sunshine’s T12A preheating system
- ✓4-in-1 design covering iPhone 12, 12 mini, 12 Pro, and 12 Pro Max
- ✓Works with the SS-T12A host for temperature control
- ✓Supports the SS-T12A system’s 185 °C layered process
- ✓Repeatable board placement for consistent bench workflow
- ✓Adds iPhone 12 coverage without a second station
- ✓Pairs with hot air stations, soldering stations, and microscopes
Specifications
| Brand | Sunshine |
|---|---|
| Model | SS-T12A-N12 |
| Category | Motherboard Heating Platform (T12A system module) |
| Compatibility | Sunshine SS-T12A host station; iPhone 12 series motherboards |
| Supported Devices | iPhone 12, iPhone 12 mini, iPhone 12 Pro, iPhone 12 Pro Max |
| Technology | Layered motherboard preheating, 4-in-1 iPhone 12 series module |
Common Repair Uses
- ✓Preheating-based board work on iPhone 12 series logic boards
- ✓Layered separation of the iPhone 12 logic board
- ✓Preheating before CPU or NAND area chip removal
- ✓Glue clearing around chips before rework
- ✓Component replacement on dead phone boards
- ✓Board-level charging issue repair
- ✓Rework on boot loop issue and hang on logo boards
Compatible Devices
- ✓Verified scope is the iPhone 12 series, used with the Sunshine SS-T12A host
- ✓iPhone 12
- ✓iPhone 12 mini
- ✓iPhone 12 Pro
- ✓iPhone 12 Pro Max
- ✓Sunshine SS-T12A host station (required to run the module)
- ✓Not for other generations: Sunshine sells separate modules for iPhone X, 11, 13, 14, 15, and 16 boards
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the SS T12A-N12 work without the SS-T12A host?
Can I use the N12 platform on iPhone 11 or iPhone 13 boards?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



