Mechanic VS Series 900M-T-I Soldering Iron Tip

₨ 400

Fine-Point 900M-T-I Tip for Phone Board Soldering

The Mechanic VS Series 900M-T-I is a replacement fine-point copper tip for 900M-series plug-in handles. Its working edge measures about 0.4 mm, so you can place solder on tight pads and fine jumper wires without spreading heat to neighboring components. The tip is about 44.5 mm long, which seats in a matching 900M handle and keeps your hand clear of the hot zone. It is rated to 900°F (about 482°C). Use it when your current point has blunted, when you need a finer edge for IC pins, or when you want a dedicated jumper tip on your bench. Clean it on a damp sponge, keep it tinned, and replace it once the point stops holding solder.

In stock

17 People watching this product now!
Description

900M-T-I Soldering Iron Tip for Fine-Point Phone Board Repair

The 900M-T-I soldering iron tip gives your repair bench a fine, controlled point for work where heat must land exactly where you apply it. You get a narrow working edge, roughly 0.4 mm across, that feeds solder into tight spaces on a phone board without flooding neighboring joints. Where a broader tip would bridge two pins, this point keeps your joints separate. It suits technicians who spend their days on micro-soldering, pad repair, and jumper work. Reach for it when the job needs control more than raw heat, and when your station accepts 900M-series tips.

Fit, Connection and Reach

The 900M-T-I uses a plug-in connection, so it seats into a matching 900M-series handle rather than a threaded shank. Confirm your handle before ordering, since the plug geometry has to match the handle exactly. Listed compatibility covers the M926, 900M and 907ESD handles, along with Hakko 927, 928, 933, 936 and 937 stations. The tip measures about 44.5 mm, or 1 3/4 inches, from base to point. That reach keeps your hand clear of the hot zone while still giving you access into a crowded board area, and it lets you work over a phone mainboard without the handle blocking your view.

Think about reach before you start a board-level job. This length gives you comfortable working room without pushing the handle into your field of view. Swapping the tip on a matching 900M-series station takes only seconds. Keep a spare on hand, so one damaged point never stops a repair halfway through.

Point Geometry, Heat Ceiling and Joint Control

The working edge measures about 0.4 mm (1/64 inch) across, which concentrates heat onto a small contact area. Place the point on the pad and the pin together, then feed solder into the joint so it wets both surfaces. Fine-pitch IC legs and small connector pins respond well to this approach. Keep your strokes light, because dragging the point across a pad can lift it. Set the tip, let the heat transfer, then move on.

This tip carries a maximum rating of 900°F, about 482°C. Keep your station setting below that ceiling for phone board work, and raise the temperature only when a joint refuses to flow. Excess heat burns flux and shortens tip life faster than almost any other habit. Copper conducts heat quickly, so the tip recovers fast between joints. Reduce the setting during long idle periods to preserve the point.

Workflow Position, Cleaning and Tip Life

In a typical board-level repair, this tip handles the precision stage. Diagnostics and continuity checks come first, using a multimeter and a microscope. The fine point then takes over for lifted-pad repair, jumper lagana, and pin-level reflow. Once the detail work finishes, move to a broader tip for ground planes or thick connector shields. Use a hot air station for any component removal that needs more heat than a soldering tip can deliver.

Keep the tip clean by wiping it on a damp sponge or brass wool between joints. Tin the point with fresh solder before you put the iron away, because a tinned copper surface resists oxidation. Avoid scraping the point with a file, since each pass removes material and changes the geometry. When the point no longer holds solder or the shape blunts, replace the tip rather than forcing it through another job.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Fine working point, about 0.4 mm (1/64 inch) wide
  • Copper body for fast heat transfer
  • Plug-in connection for 900M-series handles
  • Maximum rating of 900°F (about 482°C)
  • About 44.5 mm (1 3/4 inch) long
  • Pointed geometry for precision joints
  • Replaceable tip for restoring soldering performance
  • Suitable for jumper and pad work on phone boards

Specifications

BrandMechanic
Model900M-T-I
CategorySoldering Iron Tips
Compatibility900M-series plug-in handles
Supported DevicesHakko 927, 928, 933, 936, 937 stations with M926, 900M and 907ESD handles
TechnologyPlug-in connection
MaterialCopper
Tip ShapePointed fine point
DimensionsLength 44.5 mm (1 3/4 in); point width 0.4 mm (1/64 in)

Common Repair Uses

  • Verified workflows where a fine-point 900M-series tip applies.
  • Fine-pitch IC pin soldering on phone boards
  • Jumper wire soldering across lifted traces
  • Reflow of small surface-mount pads and component leads
  • Soldering fine connector pins during board-level repair
  • Lifted pad repair with fine wire tacking
  • Touch-up of cold joints on small surface-mount parts
  • Micro-wire soldering during board-level rework
  • Precision tinning and joint repair on small PCBs

Compatible Devices

  • Verified scope is 900M-series plug-in handles and the stations listed below.
  • Hakko 927 soldering station
  • Hakko 928 soldering station
  • Hakko 933 soldering station
  • Hakko 936 soldering station
  • Hakko 937 soldering station
  • M926 handle
  • 900M handle
  • 907ESD handle

FAQ

What is the product name?
The product name is Mechanic VS Series 900M-T-I Soldering Iron Tip.
What is the brand of this product?
The brand of this product is Mechanic.
What is the model of this product?
The model of this product is 900M-T-I.
What is this product used for?
This product is used for fine-point soldering on phone boards, jumper wire work, and pad repair.
Which devices are compatible with this product?
This product is compatible with 900M-series plug-in handles (M926, 900M, 907ESD) and Hakko 927, 928, 933, 936, and 937 stations.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which handles accept the 900M-T-I tip?
The 900M-T-I uses a plug-in connection and fits the listed 900M-series handles, including M926, 900M, and 907ESD. Confirm your handle before ordering.
What is the maximum temperature for the 900M-T-I tip?
The 900M-T-I tip is rated to a maximum of 900°F, about 482°C.