SUNSHINE SS-101F Circuit Blades Pack of 3 Special Arm

₨ 1,200

SS-101F Circuit Blade Pack of 3 with Special Arm

The SS-101F is a pack of three circuit blades built around a special arm design, which gives you tighter control when you cut, trim, and reshape pathways on a mobile repair board. The arm keeps your hand steady over confined areas where a standard blade feels awkward, so you spend less time fighting the tool and more time on the trace. Reach for it when a single pathway needs clean removal or a jumper prep cut, and you want a dedicated blade for that job instead of improvising. Each pack gives you three blades, so you can keep one for cutting, one for trimming, and one ready as a spare.

Out of stock

11 People watching this product now!
Description

SS-101F Circuit Blade Pack Built for Precise PCB Pathway Work

When a trace lifts or a pathway needs cutting before a jumper goes in, the wrong blade turns a small fix into a damaged board. The SS-101F circuit blade pack of three gives you a dedicated tool for that stage of mobile board repair. It belongs after you have diagnosed the fault and confirmed which pathway needs attention, and before you solder a bridge. Sunshine supplies it as a pack, so the spares sit at your bench instead of in a drawer. Its special arm suits tight areas where you need steady control rather than force. Keep it for pathway work and detail cuts, and match the tool to the job.

Where This Blade Fits in Your Repair Workflow

Start with a clear diagnosis. Use your multimeter and board view to find the exact pathway at fault before you touch the blade. Once you know the affected line, the blade handles the physical step: cutting the damaged section, trimming the edge, or reshaping the path so the next component sits cleanly. This order saves you from cutting the wrong line, which is a common mistake when a board is dense. After the cut, test continuity before you move to the jumper or replacement wire. Skipping that check is how a small job becomes a second repair.

Handling the Special Arm Design

The special arm changes how you hold the tool. Rest your hand on the bench, keep the blade close to the board, and let the arm guide the angle rather than pressing down. Light, steady pressure gives a cleaner edge than a heavy push. Work under magnification so you can see the pathway edges and stop before you reach the pad next to it. If the arm feels unfamiliar, practice on a scrap board first. Ten minutes of practice on a dead board will save you a damaged pathway on a customer’s phone.

Cutting, Trimming, and Reshaping Circuit Pathways

Cutting removes the damaged section of a pathway. Trimming tidies the edge so solder adheres properly and does not bridge to a neighboring line. Reshaping adjusts the path so a jumper or component can sit where it is needed. Each of these is a separate action, so work one at a time and check your result before you move on. Rushing all three at once is the fastest way to lift a pad. A slow, deliberate pass with a sharp blade leaves a clean surface for the next step.

Getting the Most from a Three-Blade Pack

Three blades give you a practical rotation at the bench. Use one blade until its edge starts to drag or tear the surface, then switch to the next. Store blades in a dry, organized spot so you always know which one is fresh. Keep the spare ready for the moment a cut needs a clean edge mid-repair. A fresh blade on a delicate pathway costs far less than a lifted trace, so do not wait until the blade fails before you change it.

Additional information
Weight0.9 kg
Q & A
Please login to post questions

Key Features

  • Pack of three circuit blades in one purchase
  • Special arm design for improved control during detail work
  • Arm configuration that suits confined spaces on a board
  • Built for cutting, trimming, and reshaping circuit pathways
  • Suitable for precise pathway work under magnification
  • Spare blades on hand for consistent edge quality
  • Brand supplied by Sunshine
  • Model SS-101F for easy identification and reordering

Specifications

BrandSunshine
ModelSS-101F
CategoryPCB Repair Tools
CompatibilityUniversal, not device-specific

Common Repair Uses

  • Cutting a damaged trace before installing a jumper wire
  • Trimming pathway edges so solder does not bridge to neighboring lines
  • Reshaping a pathway to reroute a connection on a mobile board
  • Clearing a narrow section of a board where a standard blade does not reach
  • Removing a damaged pathway section before a bridge repair
  • Preparing a pad area for jumper lagana after a trace cut
  • Detail work on fine copper lines under magnification
  • Preparing a board for pathway repair during a board-level fault

Compatible Devices

  • Universal scope. Verified for general circuit board pathway work, not model-specific.
  • Universal, not device-specific: applies to any circuit board where pathway cutting is needed
  • Mobile phone motherboards, at the general pathway level
  • Circuit boards with fine copper pathways that need trimming
  • Boards where a jumper or bridge must be prepared
  • Double-sided and multilayer PCBs, at the pathway edge only
  • Cell phone and tablet boards for general pathway repair
  • Laptop and console boards, at the general pathway level
  • Any board where you verify the trace layout before cutting

FAQ

What is the product name?
The product name is SUNSHINE SS-101F Circuit Blades Pack of 3 with Special Arm.
What is the brand of this product?
The brand of this product is Sunshine.
What is the model of this product?
The model of this product is SS-101F.
What is this product used for?
This product is used for cutting, trimming, and reshaping circuit pathways on circuit boards.
Which devices are compatible with this product?
This product is compatible with circuit boards in general. It is universal and not device-specific.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
How many blades come in the SS-101F pack?
The SS-101F comes as a pack of three circuit blades.
Can the SS-101F be used on iPhone motherboards?
The SS-101F is universal and not model-specific, so it can be used on iPhone boards for pathway work. Verify the trace layout before every cut.