Sunshine SL-908 Soldering Iron 60W Adjustable Temperature
₨ 1,500
Sunshine SL-908 60W Pen Iron
The Sunshine SL-908 soldering iron 60W gives your repair bench a slim pen-style iron with an analog dial that sets the tip anywhere from 200°C to 450°C. A built-in thermostat chip holds the heat steady while you work. The iron runs on AC 110V/220V, so it works on Pakistani mains supply without an adapter. A transparent handle exposes the internals, and the anti-static build suits work on live boards. Use it for charging port repair, flex pad cleanup, jumper wire work, and general board-level soldering. It fits the technician who needs a controllable adjustable temperature soldering iron for mobile repair at a workshop-friendly size.
In stock
Sunshine SL-908 Soldering Iron 60W: Controlled Heat for Board-Level Work
The Sunshine SL-908 soldering iron 60W targets technicians who solder on mobile phone motherboards every day and want one dial to control tip temperature. Sunshine builds it as a slim pen-style iron instead of a bulky station, so you hold it like a pencil and reach tight areas around connectors, shields, and flex pads. A built-in thermostat chip and a thick double-sided circuit board inside the handle keep heat constant while you work. The iron draws 60W and accepts AC 110V or 220V input.
Temperature Control on a Single Analog Dial
You set the tip temperature with an analog dial across 200°C to 450°C. That span covers low-heat jobs on fragile pads and higher-heat jobs on ground-plane joints that pull heat away from the tip. The iron has no digital display, so you judge the setting by dial position and by how the solder flows. Technicians who want a numeric readout should look at a digital soldering station in the Soldering Stations category instead. For a fast, dial-driven iron at a lower buying cost, the SL-908 fits the bench well.
Build, Handle, and Tip Care
The body uses plastic silicone material with thermostat wires and a two-core plug. The handle is transparent, so you see the internal construction. Sunshine markets the iron as anti-static, which matters when you work near sensitive board components. The cable runs about 1.2 metres, enough to reach from a wall socket to the working area of a standard repair table.
Clean the tip with a brass wire cleaner or a damp cellulose sponge. Do not file the tip or use abrasive sandpaper, because that strips the anti-oxidation plating and shortens tip life. Wipe and re-tin the tip after each session to keep heat transfer clean.
Where the SL-908 Fits in Your Repair Workflow
You reach for this iron when a job needs direct soldering rather than hot air. Typical cases include charging issue repairs that need a new charging port, jumper lagana on broken tracks, flex pad touch-ups, battery connector replacement, and cleaning old solder from pads before a new part goes on. It does not replace a Hot Air Station for IC change karna on BGA chips, and it does not replace Reballing Kits for chip-level reball work. Pair it with a Microscope for fine pad inspection, a Multimeter for continuity checks before and after you solder, and PCB Holders to keep the board steady under the iron. Technicians who outgrow a dial iron can step up to a full soldering station for precise numeric temperature control.
The SL-908 handles routine hardware fault repairs on Android and iPhone boards: dead phone cases traced to a broken charging line, display problem repairs that need a connector resoldered, and network issue repairs that need a damaged pad rebuilt. Keep the dial low for delicate flex pads and raise it for heavy ground connections.
| Weight | 0.35 kg |
|---|
Key Features
- ✓60W power rating
- ✓Adjustable temperature from 200°C to 450°C via analog dial
- ✓Built-in thermostat chip for constant heat
- ✓Thick double-sided circuit board inside the handle
- ✓Dual voltage input: AC 110V / 220V
- ✓Anti-static build
- ✓Transparent handle that shows the internal construction
- ✓About 1.2 metre cable with two-core plug
Specifications
| Brand | Sunshine |
|---|---|
| Model | SL-908 |
| Category | Soldering Iron |
| Compatibility | Universal soldering tool, not device-specific |
| Technology | Built-in thermostat chip with analog dial temperature control, 200°C to 450°C |
| Material | Plastic silicone |
| Input Voltage | AC 110V / 220V |
| Power Rating | 60W |
Common Repair Uses
- ✓Hand soldering on mobile phone boards where direct tip contact fits the job better than hot air.
- ✓Charging port replacement and resoldering
- ✓Jumper lagana on broken tracks
- ✓Flex pad cleanup and repair
- ✓Battery connector soldering
- ✓Removing old solder from pads
- ✓Tinning pads before part installation
- ✓Wire soldering on test points and small boards
- ✓General PCB touch-up work
Compatible Devices
- ✓Universal — the iron is a general soldering tool and does not limit you to specific phone models, brands, or chipsets.
- ✓Android phone mainboards (Samsung, Oppo, Vivo, Infinix, Tecno, Xiaomi)
- ✓iPhone mainboards for connector and flex pad soldering
- ✓Charging port and charging sub-boards
- ✓Display and touch flex connectors
- ✓Battery connector pads
- ✓Small SMD components on mobile boards
- ✓Jumper wire connections on broken tracks
- ✓General electronics boards and wiring
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What temperature range does the Sunshine SL-908 cover, and how do you set it?
Does the Sunshine SL-908 work on 220V supply in Pakistan, and how do you clean the tip?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock



