Z3X Easy-JTAG Plus UFS BGA153 Socket Adapter

₨ 36,000

UFS BGA153 Socket Adapter for Z3X Easy-JTAG Plus Box

The Z3X UFS BGA153 socket adapter seats 153-ball UFS packages in the Easy-JTAG Plus box for direct reading and writing on your repair bench. It supports Direct Mode and exposes an ISP output signal on the adapter, so one socket covers more than one connection path. Each unit carries an ECDSA-protected serial number and is rated for at least 30,000 uses. Z3X offers the adapter standalone and inside UFS multi-socket sets that add BGA254 and BGA95 sockets. Choose it when your jobs involve BGA153 UFS storage removed from a board.

Out of stock

13 People watching this product now!
Description

UFS BGA153 Socket Adapter for Z3X Easy-JTAG Plus

The UFS BGA153 socket adapter is the link that turns the Easy-JTAG Plus box into a working UFS programmer for 153-ball packages. You remove the chip, seat it in the socket, and let the box handle reads and writes through its control software. The adapter does the signal routing between the chip and the box, so your bench work centers on a clean seat and a stable connection. That makes it a practical choice for technicians who see UFS storage on a regular basis, especially on boards where the chip cannot be accessed while it remains soldered.

Where the Adapter Fits in Your Repair Workflow

Most UFS jobs start with diagnosis. When a phone shows a dead boot or a hang on logo, you need to know whether the storage holds readable data before you commit to a board-level repair. The adapter lets you pull the chip, check its contents in Direct Mode, and decide whether the fault sits in the storage or somewhere else on the board. If the storage checks out, the same socket carries the write path, so you keep one setup for both steps. Plan the removal with a hot air station and a controlled preheat, then inspect the pads under a microscope before the chip goes into the socket. Clean pads and correct alignment prevent most seating faults. Treat the socket as a precision fixture rather than a general tray, and your read errors drop across repeated jobs. Keep a log of each chip’s ball count and firmware state, because that record speeds up the next job on the same board family.

Build Quality and Connection Details

The socket uses high positioning accuracy, which keeps the 153 contacts aligned with the chip pads on every insertion. Each unit carries an ECDSA-protected serial number, so the box can verify the adapter before it runs a job. Manufacturers rate the socket for at least 30,000 uses, which gives a busy shop a long service life when you handle it with care. Connect the adapter to the Easy-JTAG Plus box, open the control software, and confirm the chip type before you start a read or write. Keep the socket clean and store it in its case between jobs. Avoid forcing the lid closed, because misalignment damages the contacts faster than normal use does. A quick visual check of the contacts before each job catches debris early and protects both the adapter and the chip.

Chip Scope and Set Options

This adapter targets UFS packages with a 153-ball layout. Z3X also includes it in sets that add the BGA254 and BGA95 UFS sockets, so you can cover several package sizes from one box. If your bench mainly handles eMMC, the Z3X 6-in-1 eMMC set covers BGA153, BGA159, BGA162, BGA186, BGA221, and BGA529 footprints, and you can add it alongside the UFS adapter. Check your chip’s ball count before you order, because a 153-ball socket will not accept a 254-ball package. Pair the adapter with a hot air station for removal and a microscope for pad inspection. Those tools complete the same workflow the box starts, and together they give you a repeatable process for every UFS job.

Additional information
Weight0.11 kg
Q & A
Please login to post questions

Key Features

  • High positioning accuracy for consistent contact alignment
  • ECDSA-protected serial number against illegal copying
  • Rated for at least 30,000 uses
  • Direct Mode read and write support
  • ISP output signal on the adapter
  • Works with the Z3X Easy-JTAG Plus box
  • Offered standalone or within UFS multi-socket sets

Specifications

BrandZ3X
CategoryUFS BGA153 Socket Adapter
CompatibilityZ3X Easy-JTAG Plus box
Supported DevicesUFS BGA153 (153-ball) packages, chip-level scope
TechnologyECDSA-protected serial number, Direct Mode and ISP output signal

Common Repair Uses

  • Off-board reading of UFS BGA153 storage after chip removal
  • Writing repaired data back to a removed UFS BGA153 chip
  • Diagnosing dead boot faults by checking storage contents first
  • Reading chip contents in Direct Mode during board-level diagnosis
  • Connecting through the ISP output signal on the adapter
  • Testing UFS BGA153 chips after reballing and cleaning

Compatible Devices

  • Z3X Easy-JTAG Plus box (host programmer)
  • UFS BGA153 (153-ball) package chips
  • Chip-level scope; device-specific compatibility not verified
  • Available within Z3X UFS multi-socket sets (BGA254, BGA95)

FAQ

What is the product name?
The product name is Z3X Easy-JTAG Plus UFS BGA153 Socket Adapter.
What is the brand of this product?
The brand of this product is Z3X.
What is this product used for?
This product is used for seating 153-ball UFS packages in the Easy-JTAG Plus box for reading and writing.
Which devices are compatible with this product?
This product is compatible with the Z3X Easy-JTAG Plus box and UFS BGA153 (153-ball) package chips at chip level.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which UFS package sizes does the Z3X set cover?
Z3X offers UFS sockets for BGA153, BGA254, and BGA95 packages, and the adapter here covers the BGA153 size.
Can this socket handle a 254-ball UFS chip?
No, this adapter supports only the 153-ball layout, so use the BGA254 socket for 254-ball chips.