WCD9330 Audio Codec IC – Qualcomm BGA
₨ 300
WCD9330 Audio Codec for Board Repair
The Qualcomm WCD9330 is an audio codec IC supplied in a BGA package, made for board-level microsoldering work. Its top marking reads QUALCOMM WCD9330, so you can confirm the part visually before ordering or fitting. A faulty audio codec is one possible cause of audio path problems, but check the flex, connectors, and traces first. Because the part is BGA, it needs hot air rework and a matched stencil for reballing before installation. Confirm device-level compatibility against your board before fitting.
WCD9330 Audio Codec IC for BGA Board Repair
The WCD9330 audio codec IC is a Qualcomm BGA part that sits in the audio path of a mobile board. Its marking reads QUALCOMM WCD9330, which makes identification straightforward at the bench. Technicians working on audio faults often trace the problem back to a codec like this when a handset loses sound output or microphone input. This listing covers what the part is, where it fits in a repair workflow, and what to check before fitting one.
Identifying the Part
Check the top marking before you order or fit a replacement. The printed text reads QUALCOMM WCD9330, with additional lot and date codes beneath it. Match the marking against your board’s original part reference to avoid a mismatch on the bench.
Repair Workflow Fit
Audio codec faults rarely have a single cause. Check the speaker and microphone flex, the connectors, and the traces around the codec before replacing the IC. If the fault remains after those checks, replacing the codec is the next step in the diagnostic sequence.
Rework Requirements
This is a BGA package, so the IC must be removed and remounted with hot air rework. You will need a matched stencil for reballing, flux, and a microscope to inspect the pads after reflow. Careless heating can lift pads or short adjacent balls, so reballing a fresh part is the safer route.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Qualcomm WCD9330 marking visible on the top of the chip
- ✓BGA package, suited to hot air rework and reballing
- ✓Board-level microsoldering part
Specifications
| Brand | Qualcomm |
|---|---|
| Model | WCD9330 |
| Category | Mobile Phone IC (Audio Codec) |
| Technology | Audio codec IC, BGA package |
Common Repair Uses
- ✓Audio codec replacement after flex and connector checks, for handsets with audio output or microphone input faults.
- ✓Audio path faults where the speaker or earpiece has no output, after flex and connector checks
- ✓Microphone input faults, after flex and connector checks
- ✓BGA reballing and hot air rework practice
Compatible Devices
- ✓Qualcomm WCD9330 audio codec IC, BGA package. Device-level compatibility is not verified; confirm against your board’s original part reference before fitting.
- ✓Qualcomm WCD9330 audio codec IC (chip marking verified)
- ✓BGA package, suited to hot air rework and reballing
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the WCD9330 need reballing before installation?
Can an audio codec fault cause a dead microphone?
Related products
343S0694 Touch IC U2402 iPhone 6 and 6 Plus Touch Black IC
In stock
358S IC T211 Samsung Tab Charging IC – Tab 3 USB Charger IC
In stock



