YCS 8-in-1 iPhone 15 Series Motherboard Test Fixture
₨ 35,000
Layered Logic Board Testing for iPhone 15
The YCS 8-in-1 fixture holds iPhone 15, 15 Plus, 15 Pro and 15 Pro Max logic boards so you can check the upper and lower layers before final reassembly. Imported beryllium copper spring probes make contact with the board, and a snap-on frame keeps it flat and stable, which gives repeatable readings. Seat the separated board, confirm the layer under test, and run your checks without soldering or re-stacking the layers. It suits repair shops that want to confirm a fault before committing a board to final assembly, and it cuts the repeated disassembly cycle.
In stock
iPhone 15 Motherboard Test Fixture for Layered Board Diagnostics
Logic board faults on the iPhone 15 range often need the upper and lower layers checked separately, and that usually means taking the board apart twice. The YCS 8-in-1 iPhone 15 motherboard test fixture lets you check each layer on a holder before final reassembly. One holder covers the iPhone 15, 15 Plus, 15 Pro and 15 Pro Max, so your bench does not need a separate frame for every model. For a technician handling several units a day, that consolidation saves setup time and keeps your workflow consistent.
Built for Layered Logic Board Testing
Each layer of the board connects through contact points that must line up with the probes. This fixture uses imported beryllium copper spring probes, which provide high conductivity and resist overload, so test values stay accurate. Spring-loaded contact presses against the pads without soldering, which means you test the board without adding heat or tin to it. Spring probes also absorb small height variations between boards, so contact stays consistent from one session to the next. Low deviation in readings matters when you are deciding whether a fault sits on the upper or lower layer.
A snap-on design keeps the motherboard flat and stable during the check. Movement on the holder is one of the easiest ways to introduce false readings, so a firm, level seat gives you data you can trust. Once the board is seated, you run your power and function checks without re-stacking the layers between tests.
Workflow Fit on Your Repair Bench
Use this fixture early in the diagnostic sequence. Separate the layers, seat the upper board, run your checks, then move to the lower layer. When a customer brings in a dead phone or a boot loop issue, the layer check tells you which board needs attention first, so you stop guessing and start fixing the right part.
Once the fault is isolated, the next steps depend on the finding. A multimeter confirms rail voltages and short-circuit points, a microscope helps you inspect the faulty area, and a hot air station or soldering station handles any component-level rework. Keeping the layer check ahead of rework means fewer unnecessary lifts on good components.
For ongoing shop use, a dedicated holder reduces how often you handle a live board. Each separation and reassembly carries a small risk to connectors and solder joints, so limiting those cycles protects the unit and your reputation with the customer. Record which layer failed on the job card, so the next technician on the bench starts from the confirmed fault. Pair the fixture with reballing kits and PCB holders when a job moves into board-level repair.
Model Coverage and Pin Board Notes
The 8-in-1 configuration supports the iPhone 15, 15 Plus, 15 Pro and 15 Pro Max. The listing states that the US version pin board for the iPhone 15 Pro and 15 Pro Max is a separate item and is not part of the 8-in-1 set. Confirm which pin board your repair needs before you order, so the fixture you receive matches the device on your bench.
Check the model of each unit before you place it on the holder. A board seated on the wrong socket gives misleading results, and that wastes time you could spend on the actual fault. Treat the model check as a standard step at intake, not something you do after a test fails.
| Weight | 0.4 kg |
|---|
Key Features
- ✓8-in-1 configuration covering iPhone 15, 15 Plus, 15 Pro and 15 Pro Max
- ✓Imported beryllium copper spring probes for high conductivity and stable readings
- ✓Strong overload resistance on the probes for repeated use
- ✓Snap-on design that keeps the motherboard flat and stable during testing
- ✓Solder-free contact for upper and lower layer checks
- ✓100% brand new
Specifications
| Brand | YCS |
|---|---|
| Model | YCS Motherboard Test Fixture Repair Holder |
| Category | Motherboard Test Fixture |
| Compatibility | iPhone 15 Series |
| Supported Devices | iPhone 15, iPhone 15 Plus, iPhone 15 Pro, iPhone 15 Pro Max |
| Technology | Spring probe contact with snap-on holder |
| Material | Beryllium copper spring probes |
Common Repair Uses
- ✓Layered logic board testing before final reassembly
- ✓Checking the upper logic board layer before final reassembly
- ✓Checking the lower logic board layer without repeated disassembly
- ✓Isolating which layer holds a fault before IC or soldering work
- ✓Narrowing down a dead phone or boot loop issue at intake
- ✓Confirming board function on a holder before the unit goes back to the customer
Compatible Devices
- ✓iPhone 15 Series, device-specific
- ✓iPhone 15
- ✓iPhone 15 Plus
- ✓iPhone 15 Pro
- ✓iPhone 15 Pro Max
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does this fixture support the iPhone 15 Pro and 15 Pro Max?
What type of probes does this fixture use?
Related products
YCS iPhone 12 Series 4-in-1 Motherboard Tester Socket
Out of stock



