Mechanic XG-50 Solder Paste 35g 183℃ Sn63/Pb37

₨ 499

Mechanic XG-50 Solder Paste 35g for BGA and SMD Rework

Mechanic XG-50 solder paste packs a eutectic Sn63/Pb37 alloy and flux into a 35g jar with a 183℃ melting point. You use it for BGA reballing through stencils, SMD component replacement, connector pad repair, and IC change karna jobs on mobile phone PCBs. The leaded formula flows at a lower temperature than lead-free alternatives, so your hot air station runs at gentler settings and your pads stay intact. Keep the jar refrigerated between jobs and handle it with proper ventilation. Mechanic XG-50 gives Pakistani repair shops a dependable consumable for dead phone, charging issue, and hang on logo repairs.

In stock

20 People watching this product now!
Description

Mechanic XG-50 Solder Paste for Precision BGA and SMD Rework

Mechanic XG-50 solder paste gives your repair bench a eutectic Sn63/Pb37 alloy blended with flux in a 35g jar, rated to melt at 183℃. You use it where a clean, bright joint matters: BGA reballing through a stencil, SMD component replacement, connector pads, and general PCB rework on mobile phone boards. The alloy turns from solid to liquid at one temperature instead of passing through a slushy range, so your joint settles quickly once the hot air or preheater reaches target. For a technician who handles dead phone repairs every day, that predictable behaviour cuts down cold joints and bridged pads. This page covers the alloy, workflow fit, storage, and handling so you can judge the paste against your own rework routine.

Leaded Solder Paste at 183℃: Eutectic Sn63/Pb37 Behaviour

The Sn63/Pb37 composition sits at the eutectic point of the tin-lead system, so the paste melts and freezes at a single temperature of 183℃. Fine solder powder suspends in flux, and that flux cleans oxide from pads and ball surfaces as the temperature climbs. The listed formulation uses a thixotropic agent, which helps the paste hold its shape after stencil printing and before heat reaches it. You get smooth flow and good wetting across copper pads and component terminations. Lead-free alloys melt at noticeably higher temperatures, so this leaded paste lets your hot air station work at gentler settings and puts less thermal stress on neighbouring components. Each 35g jar covers many reballing jobs when you apply thin, even layers.

BGA Reballing, SMD Rework and Connector Work

Spread a thin layer through your stencil over a cleaned IC, then heat the chip until the paste forms uniform balls on the pads. The same paste handles SMD capacitors, resistors, and connector pins when you need fresh solder on a lifted or oxidised pad. In a boot loop issue or hang on logo case caused by a weak BGA joint, you remove the IC, clean the pads, reapply paste, and reseat the chip under a microscope. For charging issue repairs, you refresh the joints on the charging connector or the charging IC. Technicians doing IC change karna jobs on eMMC, CPU, or power ICs get the most from a paste that wets quickly and leaves the pad bright and full.

Storage, Handling and Safety

Keep the jar refrigerated when you are not using it, and the recommended storage range is 0–10℃. Let the jar reach room temperature before you open it, which stops moisture from forming on the paste. Seal the lid straight after each job so the flux stays workable. Because the alloy contains lead, avoid prolonged or repeated skin contact, wash your hands after use, and work with ventilation or fume extraction. If you swallow any paste, see a doctor immediately. Write the opening date on the jar so your shop tracks how long each one sits on the bench.

Building XG-50 Into Your Rework Setup

Pair this paste with a temperature-controlled hot air station, a preheater, and a reballing kit with stencils for BGA work. A microscope lets you check ball formation and pad alignment, and a PCB holder keeps the board steady while the paste reflows. Soldering stations handle the fine touch-up on connectors and jumpers, which is where jumper lagana jobs finish. If your workload includes heat-sensitive boards, a dedicated low-temperature paste gives you another option beside this 183℃ standard, and a hot air station with tighter temperature control becomes your natural upgrade path. Browse the Soldering Stations, Hot Air Stations, Reballing Kits, Microscopes, and PCB Holders categories to complete your bench.

Additional information
Weight0.3 kg
Q & A
Please login to post questions

Key Features

  • Eutectic Sn63/Pb37 alloy with a single 183℃ melting point
  • 35g jar sized for repeated reballing jobs
  • Solder powder blended with flux for oxide cleaning
  • Thixotropic formulation that helps hold shape after stencil printing
  • Good wetting across copper pads and terminations
  • Lower melting temperature than lead-free alloys, so gentler hot air settings
  • Suits BGA, SMD, and connector rework
  • Recommended storage at 0–10℃

Specifications

BrandMechanic
ModelXG-50
CategorySolder Paste
CompatibilitySMD components, BGA ICs, connector pads, PCB rework (universal, not device-specific)
TechnologyEutectic Sn63/Pb37 alloy with flux, melting point 183℃
MaterialSolder powder (Sn63/Pb37) and flux
Weight35g

Common Repair Uses

  • Real-world rework scenarios where a leaded solder paste at 183℃ applies.
  • BGA reballing through a stencil
  • IC change karna on eMMC, CPU, and power ICs
  • Fixing boot loop issue and hang on logo faults caused by weak BGA joints
  • Refreshing charging connector and charging IC joints for charging issue repairs
  • Replacing damaged SMD capacitors and resistors
  • Rebuilding lifted or oxidised pads before reseating a component
  • Reflowing weak joints on dead phone boards
  • Touch-up soldering on connectors and jumper points

Compatible Devices

  • Universal solder consumable, not device-specific. It suits any board where you work with Sn63/Pb37 on BGA, SMD, or connector pads.
  • Mobile phone motherboards (all brands) for BGA IC reballing
  • eMMC and UFS memory ICs during removal and reseating
  • CPU and processor BGA packages
  • Power management ICs (PMIC)
  • Charging ICs and charging connector pads
  • SMD capacitors and resistors
  • Board-to-board and FPC connector pads
  • General PCBs for SMD rework

FAQ

What is the product name?
The product name is Mechanic XG-50 Solder Paste 35g 183℃.
What is the brand of this product?
The brand of this product is Mechanic.
What is the model of this product?
The model of this product is XG-50.
What is this product used for?
This product is used for BGA reballing, SMD component soldering, connector repair, and PCB rework on mobile phone boards.
Which devices are compatible with this product?
This product is a universal solder consumable and is not device-specific. It works on any board where you solder BGA ICs, SMD components, or connector pads with Sn63/Pb37.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Is Mechanic XG-50 solder paste leaded or lead-free?
Mechanic XG-50 is a leaded solder paste with an eutectic Sn63/Pb37 alloy and a 183℃ melting point. Use ventilation and wash your hands after handling.
How should I store XG-50 solder paste after opening the jar?
Keep the jar refrigerated in the 0–10℃ range, seal the lid after each use, and let the jar reach room temperature before opening it.