Mijing MJ-138A 138°C Lead-Free Solder Paste 35g

₨ 1

138°C Lead-Free Solder Paste for Phone Board Repair

The Mijing MJ-138A is a 35g lead-free, halogen-free solder paste with a 138°C melting point. It gives you a low-temperature option for mobile phone motherboards, CPU ICs, and BGA and SMD chips. Its fine, viscous texture and 1–10 μm particle size suit precise pad work on crowded boards. Choose it when your bench needs a gentler thermal profile than medium or high-temperature pastes. Keep the syringe sealed between jobs to protect consistency across your repairs.

Out of stock

20 People watching this product now!
Description

138°C Lead-Free Solder Paste for Motherboard Repair

The Mijing MJ-138A is a 138°C lead-free solder paste made for mobile phone motherboard work. When a CPU IC or BGA chip needs removal and reattachment, a low melting point gives you a gentler thermal window than medium or high-temperature pastes in the same range. The paste is lead-free and halogen-free, which suits modern board-level work. Each 35g unit gives your repair bench one working supply for chip-level jobs. Every job starts with the same question: how much heat can the board take? This paste gives you a clear answer before you start. Technicians handling dead phone boards, charging issue faults, and display problem repairs that end in component replacement will find it practical.

Thermal Window and Reflow Settings

A 138°C melting point sets the reflow profile you program on your hot air station. Running a lower peak temperature puts less heat into neighboring ICs, capacitors, and connectors on the board. Lead-free joints typically demand careful heat management, and a lower melting point reduces the total energy your board absorbs during each pass. You get a tighter process window, so each joint solidifies with less risk of overheating the chip. Pakistani technicians often describe a clean IC change karna job as one where heat control decides whether the component survives. If you rework the same area twice, the reduced heat load helps protect the solder mask and laminate around the pad. Set your station to match the paste, verify the profile on a test board, and log the settings you use for each chip family. Consistent settings across boards make your results predictable and your rework faster.

Particle Size and Application Behavior

The product listing gives MJ-138A a particle size between 1 and 10 μm. Fine, uniform particles spread evenly across small pads, which matters on densely packed BGA footprints. When you print paste through a stencil, uniform particles release cleanly and leave a consistent deposit. Consistent deposit volume helps you avoid bridging between adjacent pads on fine-pitch chips. The paste is described as viscous and free of foaming, so it holds its shape during placement. Manufacturer notes also cite uniform solder beads and bright joints after reflow. The paste is not easy to oxidize, so keep the cap closed between jobs and avoid leaving the syringe open on the bench. Test every new batch on a scrap board before you commit it to a customer’s phone.

Where MJ-138A Fits on Your Bench

MJ-138A supports motherboard work on mobile phones, including CPU ICs, BGA chips, and SMD components. Use it when you need to tin pads or attach a chip, rather than for general wire soldering. Clean the pads with flux and solder wick before printing paste so the deposit bonds to bare copper. Apply the paste with a stencil or syringe, place the component, and reflow under your hot air station. Inspect the joints under a microscope before you power the board. Store the paste in a cool, dry spot and let the syringe reach room temperature before you open it. Cold paste handles poorly and can change how it prints. Pair it with a Hot Air Station, a Microscope, and a PCB Holder to build a complete chip-level workflow. If your job calls for higher heat, the medium-temperature MJ-158A and MJ-190A sit in the same product family.

Additional information
Weight0.35 kg
Q & A
Please login to post questions

Key Features

  • Lead-free and halogen-free formulation
  • 138°C low melting point for gentler heat exposure
  • Fine, viscous paste with a 1–10 μm particle size
  • Described as free of foaming during application
  • Manufacturer notes cite uniform solder beads and bright joints
  • Resists oxidation when sealed between jobs
  • Suited to BGA, CPU IC, and SMD chip work
  • 35g pack for chip-level repair jobs

Specifications

BrandMijing
ModelMJ-138A
CategorySolder Paste
CompatibilityMobile phone motherboards, CPU ICs, BGA and SMD chips (general, not device-specific)
Supported DevicesUniversal, not device-specific
TechnologyLead-free, halogen-free low-temperature tin paste, 138°C melting point
Weight35g

Common Repair Uses

  • Reattaching a BGA chip on a phone motherboard
  • Attaching a CPU IC during board-level repair
  • Tinning pads before placing an SMD component
  • Reflowing SMD chips on mobile phone boards
  • Low-temperature rework near heat-sensitive components
  • Touch-up of existing SMD solder joints
  • Stencil-based paste application for small pad areas
  • Repairing lifted pads on phone boards with controlled heat

Compatible Devices

  • Mobile phone motherboards (general board work, not model-specific)
  • CPU ICs on mobile phone boards
  • BGA chips during removal and reattachment
  • SMD chips on electronic circuit boards
  • Electronic circuit boards in general board-level repair
  • Lead-free, halogen-free joints on heat-sensitive board sections
  • Universal scope: no specific phone models are verified for this paste
  • Chip-level work that calls for a 138°C melting point

FAQ

What is the product name?
The product name is Mijing MJ-138A 138°C Lead-Free Solder Paste 35g.
What is the brand of this product?
The brand of this product is Mijing.
What is the model of this product?
The model of this product is MJ-138A.
What is this product used for?
This product is used for soldering and reattaching chips on mobile phone motherboards, including CPU ICs, BGA chips, and SMD components.
Which devices are compatible with this product?
This product is compatible with mobile phone motherboards, CPU ICs, and BGA and SMD chips, with general board-level scope and no device-specific model list.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Is MJ-138A lead-free and halogen-free?
Yes, the MJ-138A is listed as lead-free and halogen-free.
Can MJ-138A be used for BGA and CPU IC soldering?
Yes, the listing describes it for soldering and repairing BGA chips and CPU ICs on mobile phone motherboards.