MiJing PM-11 Universal LCD Screen Holder for iPhone/Tablet

₨ 1

Hold the Display, Free Your Hands

The MiJing PM-11 is a universal LCD screen holder for mobile repair that keeps an opened iPhone or tablet display steady while you work inside the device. You get both hands free for battery replacement, charging port jobs, connector checks, and board inspection. The robust build handles repeated daily use on a busy repair bench, and the 80 g body stays light. Pair it with a microscope, hot air station, or PCB holder to build a faster open-device workflow at your shop. Order the MiJing PM-11 from Mechanicpk for dependable bench support across Pakistan.

Out of stock

12 People watching this product now!
Description

LCD Screen Holder for Mobile Repair: MiJing PM-11 Overview

The MiJing PM-11 is a clip-style LCD screen holder for mobile repair that keeps an opened display in position while you work on the device underneath. When you open an iPhone or tablet, the display assembly hangs from its flex cables, and that connection limits how far the screen can travel. The PM-11 takes the weight of the screen off your hands so both hands stay on the tools. Mechanicpk supplies it as a universal helping-hand accessory for benches that open front-assembly devices every day. The sections below explain where it fits in the repair stages, which jobs it supports, and which bench tools pair with it.

Screen Support During the Opening Stage

Every internal repair starts with the same stage: you lift the display and the device sits open. A display left hanging loads the flex cables, so a stable hold protects that connection while you work. The MiJing PM-11 grips the screen assembly and parks it at your working angle. Both hands come free, which speeds up each job and shortens the time the device stays open on your repair bench. The holder uses a robust build that survives repeated use, so one unit covers a full shift of repeated openings. It belongs at the very start of your workflow, before any probing, soldering, or part replacement begins. Shops that train new technicians gain a consistent starting position for every repair, and that consistency cuts accidental cable pulls.

Hands-Free Handling for Battery, Port, and Board Work

Once the screen stays put, the jobs that need two hands get easier. Battery replacement moves faster when you release the adhesive with one hand and steady the pack with the other. For a charging issue, you reach the lower board, probe the connector area, and reseat the port flex without the display swinging toward the frame. Speaker, microphone, and camera module swaps follow the same pattern: the screen waits in position and your hands stay on the part. When you inspect a dead phone under a microscope, a held display also keeps the field of view clear, so you spot corrosion or a loose connector sooner. The PM-11 weighs 80 g, so you move it between a diagnostic station and a rework station without effort. Each of these jobs shortens when you stop repositioning the screen between steps.

MiJing PM-11 Screen Holder: iPhone and Tablet Scope

The PM-11 works as a universal accessory, not a model-specific jig. Supplier documentation describes compatibility with a wide range of iPhone models, and this listing covers tablet screens as well. Because the holder does not match one exact chassis, test the grip on the device in your hands before you commit to a heavy or oversized display. Treat the MiJing PM-11 screen holder as the first layer of bench support. When the repair moves to board level, you step up to a PCB holder, a microscope, and a hot air station or soldering station for rework. A multimeter completes the set for tracing charging paths and checking continuity. If your shop wants one upgrade after the PM-11, a dedicated PCB holder gives you a fixed platform for the bare board once the display sits out of the way. Browse the Mechanicpk repair accessories category to build the full bench around it.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Hands-free screen support during internal repair
  • Reusable, robust build for daily bench use
  • Clip-style holder design
  • Universal design for iPhone and tablet displays
  • Lightweight 80 g body
  • Reduces strain on display flex cables while the device sits open
  • Shortens repair time by keeping the screen at a fixed angle
  • Pairs with microscopes, hot air stations, and PCB holders

Specifications

BrandMiJing
ModelPM-11
CategoryRepair Accessories / Screen Holders
CompatibilityUniversal screen holder for iPhone and tablet displays
Supported DevicesiPhone and tablet display assemblies (universal, not device-specific)
Weight80 g (0.08 kg)

Common Repair Uses

  • Battery replacement on opened devices
  • Charging port and port flex replacement
  • Charging issue diagnosis on the lower board
  • Speaker, microphone, and camera module replacement
  • Internal inspection under a microscope
  • Connector reseating after a drop or a hang on logo fault
  • Cleaning residue from the frame during liquid damage service
  • Test-fitting and reconnecting display flex cables during reassembly

Compatible Devices

  • Universal screen holder with no brand lock
  • iPhone display assemblies (wide model range per supplier documentation)
  • Tablet display assemblies (as listed for this product)
  • Devices whose display lifts or opens away from the frame during service
  • Repairs where the screen stays attached to its flex cables
  • Benches that use a microscope or magnifier
  • Single-technician repair benches
  • Shop and training benches that share working devices

FAQ

What is the product name?
The product name is MiJing PM-11 Universal LCD Screen Holder for iPhone/Tablet.
What is the brand of this product?
The brand of this product is MiJing.
What is the model of this product?
The model of this product is PM-11.
What is this product used for?
This product is used for holding an opened iPhone or tablet display steady during internal repair so you work with both hands free.
Which devices are compatible with this product?
This product is a universal holder. Supplier documentation lists a wide range of iPhone models, and this listing also covers tablet screens.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can the MiJing PM-11 hold an iPhone screen during battery replacement?
Yes. The PM-11 keeps the opened display in position, so you use both hands to release the battery adhesive and fit the new pack without holding the screen.
Does the MiJing PM-11 fit every iPhone and tablet model?
The PM-11 is a universal holder, and the supplier describes compatibility with a wide range of iPhone models. No model-by-model list exists, so test the grip on the specific device before you start a repair.