KOOCU M8222 Precision Screwdriver Set – 5 Piece S2 Steel
₨ 350
KOOCU M8222 5-Piece Screwdriver Set
The KOOCU M8222 precision screwdriver set for mobile repair gives your bench five S2 tool steel drivers: PH1.5 Phillips, T5 Torx, T6 Torx, 2.0 mm slotted, and 0.8 mm pentalobe. The non-slip handle pattern keeps your grip steady during small-screw work, and the compact kit travels easily between your bench and customer sites. Use it to open iPhone bottom-case screws, pull shield and bracket screws, and reach the board on charging issue and display problem jobs. Mechanicpk supplies the M8222 to Pakistani repair shops and technicians who want a focused, spec-clear opening tool.
In stock
Precision Screwdriver Set for Mobile Repair: What the KOOCU M8222 Gives Your Bench
The KOOCU M8222 is a precision screwdriver set for mobile repair that puts five dedicated drivers in one compact kit: PH1.5 Phillips, T5 Torx, T6 Torx, 2.0 mm slotted, and 0.8 mm pentalobe. Each driver uses S2 tool steel, a grade that suits the hardness a technician needs when small screws sit tight inside a phone chassis. You open the device, reach the board, and keep your tips in working shape across daily jobs. Mechanicpk stocks the M8222 for repair benches that want a focused head-type selection instead of a 100-bit kit.
Head-Type Coverage and Steel Grade
Screw access decides how fast any repair starts, and the M8222 targets the head types that show up first in a teardown. The 0.8 mm pentalobe driver matches the pentalobe bottom-case screws on iPhone models that use them, so screen and battery jobs begin with the correct tip instead of a worn improvised one. The PH1.5 driver handles Phillips screws on shields, brackets, and boards. The T5 and T6 Torx drivers serve devices that use star-pattern fasteners, and the 2.0 mm slotted driver covers flat-head screws on smaller electronics. The manufacturer specifies S2 tool steel for higher hardness, which suits tips that see repeated daily use. Match the driver to the screw head before you apply torque. A correctly seated tip protects both the screw and the board beneath it.
Where the M8222 Fits in Your Repair Workflow
Nearly every hardware repair opens with screws. Charging issue jobs, display problem replacements, battery swaps, and board-level diagnosis on a dead phone all start at the same step, and the M8222 covers it. Once the shields come off, your workflow moves to board work: a hot air station or soldering station for rework, a microscope for inspection, a PCB holder to steady the board, and a multimeter to trace the fault. Deeper faults call for reballing kits and test boxes. When a hang on logo or boot loop issue sends you inside the phone to check the battery connector and board, a reliable opening driver saves minutes on every job. If your bench later needs more head types, a larger multi-bit kit forms the natural upgrade path from this focused five-driver set. The listing also positions the M8222 for computer repair, so it works for small-electronics jobs beyond phones.
Handle Design and Who Should Buy
Each handle carries a non-slip pattern that keeps your grip steady during fine screw work, and the multicolour handles help you spot your drivers on a busy bench. The kit stays compact enough to travel in a technician bag for customer-site visits and shop-to-shop jobs. Choose the M8222 if you repair phones daily, open iPhones regularly, and want the core head types in one small set. Check your target devices first: the set carries five heads, so hex and Y-type screws fall outside its range, and you will need a wider bit kit for those. Wipe the tips after each job, store the drivers dry, and retire any driver whose tip shows visible wear. Shop owners can equip every technician with a personal set so nobody waits for a shared driver during a rush of repairs.
| Weight | 0.35 kg |
|---|
Key Features
- ✓Five dedicated drivers in one compact 5-piece kit
- ✓S2 tool steel construction for higher hardness
- ✓PH1.5 Phillips driver for shield, bracket, and board screws
- ✓T5 and T6 Torx drivers for star-pattern fasteners
- ✓2.0 mm slotted driver for flat-head screws
- ✓0.8 mm pentalobe driver for iPhone bottom-case screws
- ✓Non-slip handle pattern for steady grip
- ✓Multicolour handles for quick driver identification on the bench
Specifications
| Brand | KOOCU |
|---|---|
| Model | M8222 |
| Category | Precision Screwdriver Sets |
| Compatibility | PH1.5 Phillips, T5 Torx, T6 Torx, Slotted 2.0 mm, Pentalobe 0.8 mm screw heads (head-type scope, not device-specific) |
| Material | S2 tool steel |
| Pieces | 5 |
Common Repair Uses
- ✓Opening devices and removing small fasteners at the start of mobile and small-electronics repairs
- ✓Removing iPhone bottom-case pentalobe screws for screen and battery replacement
- ✓Pulling shield and bracket screws to reach the board
- ✓Opening phones for charging issue and display problem repairs
- ✓Accessing the board on dead phone and hardware fault diagnosis
- ✓Opening phones to check connectors on hang on logo and boot loop jobs
- ✓Disassembling computers and small electronics that use these head types
Compatible Devices
- ✓Head-type compatibility scope — works with any device that uses these five screw head types
- ✓iPhone models that use 0.8 mm pentalobe bottom-case screws
- ✓Devices that use T5 Torx screws
- ✓Devices that use T6 Torx screws
- ✓Phones, tablets, and laptops that use PH1.5 Phillips screws
- ✓Small electronics that use 2.0 mm slotted screws
- ✓Mobile and computer repair equipment (universal head-type scope, not device-specific)
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which screw head types does the KOOCU M8222 include?
Can the KOOCU M8222 open iPhone bottom-case screws?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



