Mechanic IRX6 Pro Electric Drill Grinding Pen
₨ 4,200
IRX6 Pro Grinding Pen
The Mechanic IRX6 Pro electric drill grinding pen gives your repair bench a compact rotary tool for IC glue removal, chip polishing, and fine cutting on motherboards. Four speed settings let you match the pen to the job, whether you clear epoxy from a CPU or smooth a frame edge. The plug-in head design swaps bits in seconds, and the kit includes nine emery grinding heads plus one glue removal needle, so you start work straight from the box. You hold it in one hand, which keeps your other hand free to steady the board. Technicians, repair shops, and service centers in Pakistan use it for daily board-level prep.
In stock
Mechanic IRX6 Pro Grinding Pen for Precise IC and CPU Work
The Mechanic IRX6 Pro grinding pen replaces slow manual scraping with a controlled rotary tool built for motherboard-level work. Mechanic designed it as a multi-function IC chip grinding and glue polishing pen, and the layout backs that up: a slim handheld body, a multi-gear drive, and quick-change heads. If your daily jobs include epoxy removal around a CPU, pad cleaning after IC change karna, or trimming a frame to reach a stuck screw, one pen covers each task. Mechanicpk stocks it for technicians who want a dependable mini electric drill for mobile repair without the bulk of a bench grinder.
Four-Speed Control for Glue Removal and Polishing
Speed decides whether a job finishes clean or damages the board. The IRX6 Pro gives you four speed settings, so you drop to a low gear for delicate glue removal near pads and step up for polishing or cutting harder material. A strong driving motor holds speed under load, which matters when the head meets stubborn glue on a CPU surface. You control the pen with one hand and keep the other on the board, ideally locked in a PCB holder so nothing shifts mid-cut. This control makes the pen a practical IC polishing pen for mobile repair when precision matters more than raw power.
Plug-In Heads and Included Accessories
The smart plug-in design lets you change heads without hunting for extra tools. The kit includes nine emery grinding heads, one glue removal needle, and a charging cable. Use the needle to lift glue around ICs, then switch to an emery head for polishing, lettering, or recovering a CPU surface. Different head shapes cover different tasks, so you stop improvising with mismatched bits. Abrasive heads wear down with heavy use, so keep a spare set in your drawer and replace worn heads before they lose cutting accuracy.
Where It Fits on Your Repair Bench
Place the IRX6 Pro in the preparation stage of board-level repair. Before you reball a CPU or reflow an IC with a hot air station, you often need to clear glue or polish a surface so the rework goes clean. On a dead phone with a hardware fault, glue-covered ICs hide the damaged component, and this pen exposes it without lifting neighboring parts. After rework, you clean residue and inspect pad condition under a microscope, then confirm continuity with a multimeter.
You also reach for it during cracked screen repair to remove stubborn glue, and during disassembly when a frame or bracket blocks access. Pair it with soldering stations, hot air stations, reballing kits, and PCB holders from the Mechanicpk range to build a complete rework setup. If your shop handles heavy IC-level work, this pen earns its place next to your main rework equipment.
| Weight | 0.19 kg |
|---|
Key Features
- ✓Four speed settings for different repair tasks
- ✓Smart plug-in design for quick head replacement
- ✓Strong driving torque under load
- ✓Handheld one-hand control
- ✓Nine emery grinding heads included
- ✓One glue removal needle included
- ✓Charging cable included
- ✓Suited to grinding, polishing, cutting, and lettering
Specifications
| Brand | Mechanic |
|---|---|
| Model | IRX6 Pro |
| Category | Grinding and Polishing Pens (Mobile Repair Tools) |
| Compatibility | Universal handheld tool, not device-specific |
| Technology | Multi-gear (four-speed) rotary drive with plug-in head system |
| Material | Emery grinding heads |
Common Repair Uses
- ✓Board-level preparation, glue removal, and polishing in mobile repair workflows
- ✓IC glue and epoxy removal
- ✓CPU surface polishing and recovery
- ✓Glue cleaning before reballing
- ✓Pad cleaning after IC change karna
- ✓Cracked screen glue removal
- ✓Frame and bracket cutting during disassembly
- ✓Exposing ICs on dead phone boards
- ✓Engraving and lettering on small parts
Compatible Devices
- ✓Universal handheld tool, not tied to specific phone models; works on any board or frame you can physically reach
- ✓Universal tool, not device-specific
- ✓Smartphone motherboards and PCBs
- ✓Mobile phone CPU surfaces
- ✓IC chips with glue or epoxy coating
- ✓Phone frames and middle frames
- ✓Cracked screen glue areas
- ✓Brackets and stuck screws on phone bodies
- ✓Other small electronic components and boards



