KOOCU KC-101 PCB Stand for Mobile Phone Board Repair

Original price was: ₨ 400.Current price is: ₨ 300.

KOOCU KC-101 Universal PCB Holder

The KOOCU KC-101 PCB stand locks a phone mainboard in place so you can solder, desolder and rework without chasing the board across the bench. A carbon steel body carries a three-piece bayonet clamp that moves up and down, so you set the jaws around the components you need to keep clear. A screw lock fixes the sliding block once the board sits snug. The holder takes small mobile boards up to roughly 70–80 mm wide and about 3 mm thick. At about 169 g, it moves easily around your repair bench, and you can also screw it to the table for a fixed station. Pair it with your hot air station, soldering station and microscope for steady board-level work.

In stock

15 People watching this product now!
Description

KOOCU KC-101 PCB Stand for Precision Board-Level Work

The KOOCU KC-101 PCB stand gives you a fixed, repeatable platform for mobile phone mainboards during soldering, desoldering and rework. You clamp the board in a metal fixture instead of balancing it on a mat or pinching it with tweezers, which frees both hands for the iron, the hot air nozzle or the multimeter probe. KOOCU designs the KC-101 as a compact universal holder for phone-size boards, and it belongs in the PCB Holders group beside your soldering stations, hot air stations and microscope on a professional repair bench.

Clamping Design and Board Range

The KC-101 uses a carbon steel body with a three-piece bayonet clamp. You seat one edge of the board against the spring card on the fixed side, push it back, then slide the movable block against the opposite edge and tighten the screw. The lock holds the board firm while you work. The bayonet pieces move up and down, so you choose the jaw position that keeps the grip clear of ICs, shields and connectors. The holder accepts phone mainboards up to roughly 70–80 mm wide and about 3 mm thick, which covers most smartphone boards that reach a workshop. Large computer and TV motherboards exceed that range, so use a bigger fixture for those jobs.

Where It Fits in the Repair Workflow

Most board-level jobs start the same way: you pull the mainboard, secure it and heat only the area you need. The KC-101 handles the securing step. You use it for IC change karna on charging, power and audio ICs, for eMMC reballing prep, for jumper lagana on lifted tracks and for cleaning flux off a dead phone board after a hardware fault repair. A fixed board also lets you work under a microscope without drift, and it keeps the board steady while you measure points with a multimeter. If you run reballing kits and stencils, the clamp holds the board level while you align the stencil.

Bench Setup and Handling

At about 169 g gross weight, the KC-101 stays easy to carry between a soldering station and a hot air station. You can leave it loose for flexible jobs or fix it to the bench with self-tapping screws when you want a permanent rework position. The metal construction holds its shape near heat, and the screw-lock design lets you adjust or release a board in seconds between jobs. Technicians who handle several boards a day pick the KC-101 for fast clamping and a steady grip rather than extra features they never use. Treat it as a first PCB holder for a new bench, or as a spare fixture for a second rework position.

Additional information
Weight0.3 kg
Q & A
Please login to post questions

Key Features

  • Carbon steel body
  • Three-piece bayonet clamp
  • Bayonet pieces move up and down for jaw positioning
  • Spring card on the fixed side for quick edge seating
  • Screw lock on the sliding block for a firm grip
  • Holds boards up to roughly 70–80 mm wide and about 3 mm thick
  • Mounts to the bench with self-tapping screws
  • Lightweight at about 169 g gross for easy bench movement

Specifications

BrandKOOCU
ModelKC-101
CategoryPCB Holder / PCB Fixture
CompatibilityUniversal for small mobile phone PCBs
Supported DevicesMobile phone mainboards within the board width range
MaterialCarbon Steel
WeightApprox. 169 g (gross)

Common Repair Uses

  • Holding phone mainboards steady during soldering, desoldering and rework.
  • IC change karna on charging, power and audio ICs
  • Jumper lagana on lifted tracks and pads
  • Hot air rework on small components
  • eMMC and CPU reballing preparation
  • Charging port and connector repair on bare boards
  • Flux and board cleaning
  • Microscope inspection of dead phone boards
  • Multimeter probing and testing on a fixed board

Compatible Devices

  • Universal, not device-specific. Fits mobile phone boards within roughly 70–80 mm width and about 3 mm thickness.
  • Android smartphone mainboards within the width range
  • Samsung boards within the width range
  • Oppo and Vivo boards within the width range
  • Infinix and Tecno boards within the width range
  • Xiaomi and Realme boards within the width range
  • iPhone boards within the width range
  • Feature phone boards
  • Small PCBs and sub-boards of similar size

FAQ

What is the product name?
The product name is KOOCU KC-101 PCB Stand.
What is the brand of this product?
The brand of this product is KOOCU.
What is the model of this product?
The model of this product is KC-101.
What is this product used for?
This product is used for holding mobile phone PCBs steady during soldering, desoldering and rework.
Which devices are compatible with this product?
This product is universal and fits mobile phone boards within roughly 70–80 mm width and about 3 mm thickness.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What board size does the KOOCU KC-101 PCB stand hold?
The KC-101 holds small mobile phone boards up to roughly 70–80 mm wide and about 3 mm thick.
Can the KC-101 hold large computer or TV motherboards?
No. The KC-101 targets small mobile phone boards, and large computer or TV motherboards exceed its clamping range.